Used Centering for sale (11,930)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 55,476 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN Mill Plus IT, spindle speed (max.): 12,000 rpm, New motor spindle in 2012 TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Motor spindle speed: 12,000 rpm Tool holder: HSK-A 63 Tool magazine positions: 120 Table speed: 500 rpm Torque: 1692 Nm Table diameter: Ø 800 + 630 mm Load limit: 800 kg MACHINE DETAILS Control: HEIDENHAIN Mill Plus IT Hodpjx Sqr Iefx Ah Nsfb Spindle hours: 55,476 h EQUIPMENT Universal milling head with controlled B-axis 2 pallets 800 mm x 630 mm Pallet changer Rotating inspection window Operating mode 4 Tool breakage monitoring

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AB/226310, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, empty load weight: 1,310 kg, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,300 x 1,880 x 2,350 mm Unladen weight: 1,310 kg Hfjdpfx Ahjx Tpv Io Nsb

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,396 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain 530, number of axes: 3, In 2022, the tool magazine door was replaced. In 2023, the SIMODRIVE 611/18A servo converter was replaced! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Hodpfox Up E Eox Ah Nofb Tool holder: SK 40 Number of axes: 3 MACHINE DETAILS Control: Heidenhain 530 Operating hours Spindle hours: 18,396 Machine hours: 56,040

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Hfedpfx Ahsx Updnj Neb Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Hfedpfx Aex Tqg Ujh Njb Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, MORI SEIKI Horizontal CNC Lathe NLX2500Y / 700 (Year 2015) Mitsubishi M730BM (MAPPS) Chuck Size 10" Max. Swing dia. 920mm Turning Diameter dia. 366mm Center Distance 700mm Bar Capacity dia.80 C axis 0.001 degree X Axis Travel 260mm Z Axis Travel 795mm Y axis Travel +/-50mm Turret 12 ( 12 rotating Tools) Power Tools 10,000rom Spindle 4,000rpm Tail Stock - programmable Hodpfx Aox Ty Tdsh Nefb Chip Conveyor

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,230 mm Travel Y-axis: 1,400 mm Travel Z-axis: 850 mm Table size: 2,000 mm × 1,250 mm Table load capacity: 6,000 kg Spindle speed: 6,000 rpm Spindle drive / Power: 38 kW Tool holder: SK50 Rapid traverse: 12 m/min Hedpfx Ahjx Sqrhe Nofb Number of tool stations: 40 MACHINE DETAILS Control: HEIDENHAIN iTNC 435 Dimensions & Weight Machine dimensions (L × W × H): 6,135 × 4,338 × 4,150 mm Weight: 22,000 kg Operating Hours Spindle hours: 47,512 h Program run time: 48,891 h Power-on hours: 72,846 h EQUIPMENT Coolant system Chip conveyor Internal cooling Electronic handwheel control Automatic tool measurement Workpiece measuring probe Chip flushing

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AH/121500, travel distance X-axis: 2,486 mm, travel distance Y-axis: 1,255 mm, travel distance Z-axis: 150 mm, table width: 1,290 mm, table length: 2,570 mm, TECHNICAL DETAILS Travel X-axis: 2,486 mm Travel Y-axis: 1,255 mm Travel Z-axis: 150 mm Maximum X-axis stroke: 3,120 mm Maximum Y-axis stroke: 1,685 mm Maximum Z-axis stroke: 250 mm Table length: 2,570 mm Table width: 1,290 mm Hfjdpfxsx Tppno Ah Neb Tool changer positions: 8 units MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,870 x 1,900 x 2,300 mm Unladen weight: 2,500 kg Transport packages: 1 unit EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg Hsdpfx Ahex Up Dhe Nofb

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket Hfodpfx Aoifn N Neh Nob - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: Hfsdpfxewf Dvas Ah Njb - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, DMG MORI Horizontal Turning Machine CTX -310V3 ecoline - Year 2010 Controller : MAPPS (Mitsubishi) Max swing dia.330mm Max swing over slide dia. 260mm Max. Turn dia. 200mm Hjdsx Ty S Tepfx Ah Njfb Length 450mm Chuck 8" Turret 12 (6 driven tools) C axis indexing Power driven Tools 4,500rpm Tool setter tail Stock Chip conveyor --- Video upon request

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 20,134 h, load capacity: 46,000 kg, lifting height: 15,355 mm, fuel type: diesel, power: 240 kW (326.31 HP), total length: 9,250 mm, drive type: Diesel, construction width: 4,204 mm, Full Container Reachstacker Load center: 1865 Transmission: Dana TE30 Condition: Ready for operation and fully functional Technical condition: Very good Front tire size: 18.00-33 Rear tire size: 18.00-33 Hedex U Hcnjpfx Ah Nefb Hydraulic support jacks for increasing the lifting capacity in the 3rd row from 21 t to 30 t, central lubrication system

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg Hfsdpex U E Szofx Ah Nob OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; HIGH PRESSURE COOLANT PUMP ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Hfedpfxexnlgce Ah Njb

Condition: new, Year of construction: 2023, functionality: fully functional, with 8 pallets Fanuc M-Pro1 (0i-MF Plus) control system Travel X/Y/Z: 800/800/860 mm Hjdpfxjuafl Is Ah Nefb Rapid traverse X/Y/Z: 74/74/74 m/min Pallet size 500 x 500 mm Load capacity: 550 kg per pallet Workpiece size: Ø800 x H1,000 mm Tool holder: BBT 40 Number of magazine positions: 220 Max. Tool diameter: Ø95 mm Max. Tool diameter with free neighboring pockets: Ø185 mm Max. Wkz. length: 400 mm Max. Tool weight: 8 kg Spindle cone: BBT40 Big Plus™ Speed: 15,000 rpm Chip spirals on the right and left in the machine Coolant through the spindle Dual chip conveyor Fully-fledged 4th axis from PARKSON 50 kvA transformer

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum Hjdpfx Aheft S Eao Nefb > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,560 h, load capacity: 9,000 kg, lifting height: 16,450 mm, fuel type: diesel, mast type: duplex, power: 164 kW (222.98 HP), empty load weight: 37,500 kg, drive type: Diesel, construction width: 4,120 mm, Empty container handler Load center: 1219 Mast type: Duplex Transmission: Dana TE17000 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 20-40ft telescopic spreader Elme model 584LD with MPS Hsdpfxjx U Hcho Ah Nofb

Condition: new, Year of construction: 2025, - FANUC 0i-MF Plus "NEW" - 10.4" LCD color screen - Diagonal, MANUAL GUIDE i Machine Table - Table size: 1,120 x 560 mm - Load capacity: 1,000 kg - T-slot width: 18 mm - Number of T-slots: 5 - T-slot spacing: 100 mm - Table height from floor: 900 mm Travel paths and distances - X / Y / Z travel paths: 1,050 / 560 / 560 mm - Spindle nose to table surface: 150 - 710 mm - Spindle center to column: 600 mm Linear axis guides & speeds - Flat guides in X / Y / Z axes - Rapid traverse X/Y/Z: 36/36/34 m/min - Milling feed: 1 – 10,000 mm/min - Minimum increment: 0.001 mm Tool magazine (CAM type) / tool changer - Tool holder: BBT-50 (optional SK-50) - Number of magazine positions: 24 - System: random - Max. tool diameter: Ø 105 mm - Max. tool diameter with free adjacent positions: Ø200 mm - Max. tool length: 300 mm - Max. tool weight: 15 kg Spindle - Spindle taper: BTT-50 BIG-PLUS® (optional SK-50) - Drive type: 2-stage gearbox - Speed level 1: 80 - 1,500 rpm - Speed level 2: 1,500 - 8,000 rpm - Drive power (30 min/continuous): 11 / 7.5 kW - Torque (30 min/continuous): 236/161 Nm up to 369 rpm - Lubrication: Grease - Inner bearing diameter: Ø80 mm - Spindle cooling: Oil Coolant, chip, and compressed air management - Coolant system including 400-liter tank and pumps - External coolant around the spindle - Internal cooling 50 bar - Bed flushing, 0.85 kW / 130 l/min., (optional) - Chip spirals on the right and left side of the machine bed Chips are conveyed to the front of the machine - Chip spiral (optional: belt or scraper belt chip conveyor) Chips are conveyed to the left side of the machine Hsdpfewkf Izjx Ah Nsfb - Compressed air nozzle on the spindle (M32/M33) - Compressed air through the spindle (M38/M39), (Optional) - Compressed air and coolant gun Other Equipment - Pivoting control panel - Electronic handwheel (wired) - Central oil/air lubrication system - Spindle oil cooler - Fully enclosed housing - Work light - Heat exchanger on the control cabinet - Auto-Power OFF function - Hand tool set - Signal light - Transformer 400 VAC, 50 Hz - CE Declaration of Conformity

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Hedpfswf Eb Rsx Ah Njfb Loading - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 - User-defined macro programming Hedpowxdpgsfx Ah Nsfb Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool Hfjdpfx Aowwkx Ejh Neb  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. Hfjdpfx Ahexmhdns Neb The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Vertical machining center with 1000 mm in the Y axis, ideal for mold making. Year of manufacture: 2010 Control: Heidenhain iTNC 530 Table dimensions: 2220 x 1000 mm Table load capacity: 3000 kg Travel: x 2020 mm, y 1000 mm, z 800 mm Spindle drive: 25 kW Rapid traverse (x/y/z): 16/16/12 m/min 4 spiral chip conveyors beside the Y axis 4 flat guides in the Y axis electronic handwheel Thread cutting without compensation chuck automatic central lubrication Magazine with 40 positions and fast double-arm changer ISO 50 taper automatic shifting gearbox with oil cooler from ZF Glass scales on all axes Through-spindle coolant 20 bar Hfjdpfx Ahjxln A Io Neb Paper band filter on separate coolant tank, 330 l Machine weight approx. 19,000 kg Machine immediately available due to business closure The machine can still be inspected under power.

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1 CNC Universal Machining Center DECKEL MAHO - DMU 50 T Year of manufacture: 2003 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Siemens 810 D Spindle speed range: 20 - 9,000 rpm Main spindle drive power: 9 / 13 kW Tool holder: ISO 40 DIN 69871 Table dimensions: 700 x 500 mm Swiveling B: 105° (-10°/+95°) manual Rotating: 360° manual Max. table load: 200 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14H7 mm Hfodpfxox Auvvj Ah Neb Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Feed rate max.: 10,000 mm/min Rapid traverse: 12 m/min Minimum input unit: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Available immediately. Including tool holders and zero point clamping system.