Used Centering for sale (11,945)

Condition: good (used), End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver Hnsdpfx Asx H Ip Heh Nsg -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Condition: used, Log centering system for aligning logs with 6 rollers before cutting in sawmill systems. Hedpfxoxyw Dko Ah Nong Technical specifications: on demand feed: max about 70 m/min Hexagonal diameter: max. approx. 45 cm

Condition: used, functionality: fully functional, Ferwood Code: RU0008903 - Manufacturer Code: 7130302 - Condition: Used - Functionality: Fully functional - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer an overhaul service, contact us. Hnjdpjv Hgtxofx Ah Neg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Centering with 2 x 3 rollers, diameter 200 x 300 mm Drive 2 x 3 kW Centering with synchronous linkage and servo cylinder The centering can optionally be equipped with an extraction device for easy tool change Hnedpfx Aox Eig Uoh Nog

Condition: used, Year of construction: 1991, Technical details: workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm Hnsdpfx Ahju Iww Uj Neg workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! Hjdpfx Ahexb Ucaj Njng A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: good (used), fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures Hnjdpfx Aheb A N Nts Neg -Weight: 1 kg

Condition: used, Log centering system for aligning logs with 4 rollers before cutting in sawmill systems. Hnedpfoxyw D Rex Ah Nsg Technical specifications: on demand feed: max. about 70 m/min Hexagonal diameter: max. approx. 45 cm

Condition: used, functionality: fully functional, Ferwood Code: RU0008309 - Manufacturer Code: 7131103 - Condition: Used - Functionality: Fully functional - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer an overhaul service, contact us. Hedpfx Ahjv Hgh Ao Nsng

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs Hodpfx Ahoxuipbe Nong - Six centering material clamps - Hydraulic feed

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Hedpfx Ahsxxkd Io Neng Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice MACHINE DETAILS Performance Data Power: 24 kW Voltage: 400 V Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: not inspected (used), Year of construction: 1989, • Max width of saws 400mm • Max cutting height 140mm • 132kW engine • Centerer Hnjdpfx Ahsif Ah Hs Nog

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck Hnjdpfx Ahsxrlt Re Neg -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm Hnodpfx Ajwwl I Ioh Neg workpiece length 0 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The UMA was built in 1961 and the guides have been rebuilt.

Condition: used, functionality: fully functional, Ferwood Code: RU0001926 - Manufacturer Code: 7131106 - Condition: Used - Functionality: Fully functional - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer an overhaul service, contact us. Hnsdpfov Du Tzox Ah Nog

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved Hedpfjri Sicsx Ah Nsng If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: used, self centering hub (5146) Make WMW Hjdpfx Aodb Uzxeh Nsng maximum 2800 RPM.

Condition: good (used), Year of construction: 2013, E.Büker - Type N76 End Finishing Machine / Beveling Machine - Working range: 6 - 76 mm - Speed: 10-1800 rpm - Power: 0.75 kW - Base frame Hnsdpfx Aexnlnmoh Neg - Emergency stop Dimensions: LxWxH 0.7x0.5x1.4 meters / Weight 250 kg Errors and input mistakes excepted

Condition: good (used), fixed center, fixed punch center, fixed Morse taper, fixed centering center, centering centers -Fixed centering tip: 3 pieces -Mounting: Met. cone 80 mm see photos -Shipping/Price: complete -Transport dimensions: 400/250/H80 mm Hnedpjxb T A Eofx Ah Nsg -Total weight: 33.5 kg

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering - longitudinal turning up to maximum 40 mm Hnjdpfx Ajiamn Ssh Nog - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: good (used), Centering Machine - KUHN KAZ 80-2 Hjdpsxcmhwjfx Ah Nsng - Max. workpiece diameter / round: 80 mm - Max. workpiece diameter / square: 60 mm - Centering length: endless - Clamping unit with self-centering vise - Spindle drive: 1.8 kW - Drill chuck - Chip tray - Power cable - Forklift slots for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg Subject to errors and input mistakes.

Condition: good (used), fixed center, fixed punch center, fixed Morse taper, fixed centering center, centering centers Hjdpfxstff Akj Ah Nong -Fixed centering tip: 8 pieces -Morse taper MK6 -Shipping/Price: complete -Transport dimensions: 260/130/H280 mm -Total weight: 40.6 kg

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver, roller tip -Manufacturer: Neidlein, face driver mount: MK5 Hedpfxsu Tlg Eo Ah Nsng -Type: OEX 5 -Front dimension: Ø 39 mm -Dimensions: Ø 75 x 185 mm -Weight: 2.6 kg

Condition: used, fixed point, fixed Morse taper, fixed centering point, centering points, centering ball, centering mandrel -Centering mandrel: fixed centering ball Ø 84 mm -Receptacle: Morse taper MK5 -Dimensions: Ø 84 x 297 mm Hsdpsrlppgjfx Ah Njng -Weight: 5.2 kg

Condition: good (used), fixed center, fixed punch center, fixed Morse taper, fixed center point, center points -Fixed centering tip: Ø 57 mm -Recording: MK4 -Dimensions: Ø 32 x 157 mm Hnjdpfev Uw Upox Ah Nog -Weight: 1.1 kg