Used Centering for sale (14,044)

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: Fgjdpfx Alezyq Ebjbsg approx. 10,000 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Fjdpfxsywzq Se Albogg Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Fgsdjzz Ahqjpfx Albjg Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Most recently (2026): Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter.

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 950 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -180 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW max. torque at 40% / 100% load 223 / 160 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 50 Fedpfjzz Afcex Albsgg tool length - max. 400 / 465 mm tool diameter 72 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 26,00 t dimensions of the machine ca. 7,00 x 4,50 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant unit, sitchable to minimal quantity lubrication coolant through the spindle max. 80bar, chip conveyor.

Condition: excellent (used), Year of construction: 2006, HAAS VF-2BHE cnc machining center Year: 2006 Technical details: X axis travel 762 mm Y axis travel 406 mm Z axis travel 508 mm Spindle nose BT 40 Spindle speed max 7500 rpm Fsdjzylhkopfx Albsgg Power 11 kW Tool changer 20 positions Table size 914 x 457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Spiral chip conveyor Remote control Prepared for 4.axis ( drive and wiring included ) Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: good (used), Year of construction: 2003, Opportunity to buy a 3 axis vertical machining center in good condition. Mainly used process plastic, so it has not suffered heavy machining and only 7434 spindle hours. Fgsdpfxjzzz Ebs Albog Optional: ca 30 BT-40 holders, including drill chuck holders, Weldon holders and collet chucks. This machine is immediately available for delivery. Travel distance X-axis 1500 mm Travel distance Y-axis 300 mm Travel distance Z-axis 350 mm CNC Control HEIDENHAIN TNC 410 Total height 2300 mm Total width 3250 mm Overall weight 3200 kg Spindle speed (max.) 8000 rpm Product length (max.) 2900 mm Number of axes 3 Toolholder BT40 Clamp surface height above machine table 860 mm Max tool diameter 80 mm Max tool length 200 mm Max tool weight 3 kg Internal cooling Air cooling through the spindle Capacity tool magazine 19 positions Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Fgedpsy U Naijfx Albeg Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2011, Verfahrwege: X850 x Y500 x Z610 mm 2-Achsen Schwenk-Rundtisch FIBRO HEIDENHAIN iTNC 530 Tischdurchmesser 400 mm HEIDENHAIN Messlineale x,y,z Sperrluft Handrad HR-410 Fodpfx Aljg N Adbobegg Wasserpistole Hauptspindel 12.000 Upm mit Direktantrieb 10/17 kW Luftkühlung durch die Spindel 40-fach Werkzeugwechsler SK 40 Schneckenförderer links und rechts Späneförderer Vertikale Schutzabdeckung aus Stahllamellen bis zum Dach M&H Infrarot Messtaster

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW Fgsdpsgydn Isfx Albeg

Condition: excellent (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Travel paths: X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Control system: Mazatrol Matrix Foder Drcmepfx Albjgg Accessories: Chip conveyor, complete documentation for the machine.

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Fgjdpfxsiv R Hlo Albog Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Fgsdpov Drigofx Albjg Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: excellent (used), Year of construction: 2008, HAAS VF-2SSYTCE cnc machining center Year: 2008 Fgjdpfx Ajzyk N Helbjg Technical details: X axis travel 762mm Y axis travel 508mm Z axis travel 508mm Spindle nose BT 40 Spindle speed max 12000 rpm Power 22.4 kW Tool changer 24 positions Maximum tool diameter 64mm Maximum tool length 279mm Maximum tool weight 5 kgs Table size 914x457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Spiral chip conveyor Inline direct Spindle Drive 12000 rpm spindle Extended Y-travel, 508 mm Digital remote control Prepared for 4.axis ( drive and wiring included ) USB port Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: new, Year of construction: 2026, P5 Retrofit CNC milling center for 5-axis machining of thermoformed parts. Working area (cube dimensions): X-axis: 600 mm Y-axis: 800 mm Z-axis: 400 mm, with a fixture height of 120 mm. All specifications are based on a tool length of 60 mm from the front edge of the collet nut. Max. shank diameter: 10 mm (ER16 mini collet). Table design: 1 piece aluminum flat table, size: 600 x 800 mm, with threaded bushings. Vacuum supply: 1 piece vacuum clamping circuit on the table, vacuum distribution pipe with 3 x quick-release couplings NW 7.2, digital pressure monitor. 1 piece vacuum pump, suction capacity approx. 40 m³/h. Milling spindle: 1 piece milling spindle (double spindle), air-cooled, 2 x ER16 mini collet chucks, power 2.5 kW, max. speed 27,000 1/min. Axis drives: Ball screw in the X / Y axis and Z axis; A / B axes with hollow shaft drives. Rapid traverse speeds X / Y axis => 45 m/min Z axis => 45 m/min Rotary / swivel axis => 12,000°/min. Fgodpfxozzzrhj Albeg Acceleration (max.) => 2 m/sec² All axes are equipped with digital technology and absolute measuring systems. This eliminates the need for a reference run at the start of operation. Machine control: 1 piece BWO VEKTOR C Basic Plus Robot machine control. The complete unit is housed in an enclosure with a 15-inch capacitive touchscreen, which is mounted on the front of the machine. 64 MB NC memory USB interface Safety features: The machine is equipped with a robust sheet metal guard, with a separate access door for the rear of the machine; the guard is open at the top. 1 piece sliding door (manually operated), to demarcate the working area. Availability: The machine is operational and can be inspected immediately. Available from stock, delivery and installation can be arranged on short notice. Price on request, please request our offer.

Condition: used, Year of construction: 2008, operating hours: 5,300 h, functionality: fully functional, turning length: 740 mm, turning diameter over cross slide: 350 mm, spindle motor power: 21 W, travel distance X-axis: 340 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 600 mm, overall weight: 6,900 kg, Equipment: documentation/manual, Gildemeister CTX 410 V4 Fodpfezzzqqox Albjgg Universal lathe Control system: Fanuc 32i Main drive: 21 kW, 240 Nm Turret: Sauter Year of manufacture: 2008 Travel distances: X-axis: 340 mm Y-axis: 40 + Z-axis: 600 mm 1 chip conveyor Tailstock Hydraulic hollow chuck, maximum draw tube inner diameter 66 mm Automatic sliding shield operation Option: Enhanced coolant pump, 12 bar, 23 l/min Coolant gun 3-jaw chuck BRD210, SMW Autoblock Foot switch for tailstock operation Tooling available upon request Documentation and export possible for an additional charge. Inspection possible while the machine is powered on. We would be happy to send you further details or arrange an on-site inspection.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Fodpfx Aloyywcvjbjgg Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 2132 5x, functionality: fully functional, operating hours: 150 h, number of slots in tool magazine: 12, total length: 3,200 mm, total width: 2,070 mm, overall weight: 10,000 kg, For sale: AES Ultra Raptor 2132 – 5-axis CNC machining center We are selling an AES Ultra Raptor 2132 CNC machining center, a top-of-the-line machine for processing wood, MDF, particleboard, compact panels, and other panel materials. Features: Fodpszzzbcsfx Albogg ✔ 5-axis machining ✔ Working area: 3000 x 2100 mm ✔ Automatic tool changer ✔ Nesting table with vacuum clamping ✔ High precision and productivity ✔ Suitable for the production of furniture, stairs, doors, kitchens, and other custom-made products The machine is in excellent condition and ready for operation. Price: €75,000 + VAT For more information, photos, or to arrange a machine inspection, please contact us.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Fsdpfx Alozzyt Debegg For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Year 2016 Control FANUC 31i-B Table size 700 x 1400 mm Table load 1800 kg Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Fsdezzymkjpfx Albjgg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and Fgjdpfxswfdm Ee Albjg variable machine table.

Condition: good (used), Year of construction: 2000, functionality: limited functionality, overall weight: 2,200 kg, SCM Tech 95 CNC The computer is faulty, the new computer is shown in the pictures, but needs programming. Fgjdezzx Itopfx Albeg I have all the installation CDs for the machine. The machine comes from a school, has hardly been used, and is technically in very good condition.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Fsdjzzx H Aepfx Albegg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Documentation Note: The machine has been regularly maintained both electronically and mechanically. New ball bearings and linear guides were installed approximately 2 years ago.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Spindle speed: max. 12,000 RPM MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Fjdpfjzzx Hiox Albogg Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 810 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 rpm Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control system model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT CE marking Chip conveyor Spindle speed infinitely adjustable Fgedpjzzx Hcsfx Albsg Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW Fgedezzxzmspfx Albog * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.