Used Camshaft Milling Machine for sale (83,918)

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Ljdpjr Hr D Nefx Adksrw Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: used, Year of construction: 2003, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain TNC 430 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar Ledpfxoxylqrj Adkjrw - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: ready for operation (used), Year of construction: 2009, x-travel 560 mm y-travel 320 mm z-travel 400 mm turning speeds 25 - 2000 U/min turning speeds 18 Stufen spindle taper ISO 40 quill stroke 100 mm table: 320x1000 / 450x950 mm table load 125 kg feed range 5 - 400 mm/min feed 18 Stufen rapid traverse 1.400 mm/min workpiece weight max. 125 kg T-slots 7x 14.0 mm total power requirement 4.2 kW weight of the machine ca. 1650 kg. range L-W-H 1800 x 1500 x 1780 mm from a training workshop - good condition (!!) New price ~ 25.000 euros - in checked conditions - machinevideo - ?v=2DcUYH1OMRQ Equipment: - electro-motorized universal milling machine - ACURITE 3-axis digital display - electro-motorized adjustment of all axes (X/Y/Z axis) * ball screws X and Y axis * rapid traverse in all 3x directions * electrical locking of all axes Lsdpfxjxacc Ej Adkorw - electromagnetic brake for spindle stop * foldable milling spindle guard - coolant system - lower chip tray - vertical milling head with quill adjustment * milling head rotation 90° * tool holder ISO 40 with internal thread M16 - fixed box table 950 x 450 mm * number / size of T-slots 7 pieces / 14.0 mm * distance between T-slots 63.0 mm * minimum distance between base table / spindle axis 163 mm - Counterholder block for horizontal milling - Halogen lighting - Slatted cover on the vertical column guide - 4x machine feet - Central lubrication including container - Original operating instructions

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 141 by 175 mm high -Drawing: in the photos -Quantity: 1x counter bearing available Lrjdpfx Adsd D Nfnskew Price: per piece -Dimensions: 250/70/H205 mm -Weight: 12.2 kg

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Lodpfxjxg Rxbe Adksrw

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F200 ECO Premium CNC Milling Machine—direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Drive motor torque S1 operation: 57 Nm Drive motor S6 30% operation: 17.1 kW Drive motor torque S6 30% operation: 118 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Flushing pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid feed, X-/Y-/Z-axis: 48 / 48 / 48 m/min Motor Torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed Forces X / Y / Z-axis: 5,34 kN / 5,34 kN / 6,68 kN Lrsdexyh Dbopfx Adksw Speed Range Spindle speed*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 650 mm Table length × width: 1000 × 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Maximum load capacity: 500 kg Dimensions Length × width × height: 2,400 × 2,355 × 2,860 mm Total weight: 5,500 kg Equipment • Linear guides with ball screw for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 port and 230 V power outlet • Machine lamp in work area • Cleaning blow gun • Ball screws and linear guides from THK • Chip flushing system • Cooling at the spindle head (machining area) • Control cabinet • Arm-type tool changer • SW24 • CE compliant *More options available

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Lrsdpfx Asr Id S Eedkjw Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2005, - Heidenhain TNC 410 M contouring control, control panel can be moved over the entire machining length - Robust basic structure as welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z-axis with ball screw (20 m/min) Lredpfxju E Ti Ie Adkew - 2 chip drawers - Swiveling clamping device for 4700 mm workpiece length - 10 pneumatic workpiece clamps - Manually operated central lubrication system - Moving disk tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - machine light - Safety bumper - Machine protection hood pneumatic vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the clamps must be partially replaced - Contact cables of the cylinders for the tensioner displacement must be partially replaced Machine specifications - Control: Heidenhain iTNC 530, 3 controlled axes - Travel X/Y/Z: 5000 / 275 / 310 mm - Working range X/Y/Z with swivel device: 4700 / 155 / 110 mm - Rapid traverse X/Y/Z: 30 / 10 / 10 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool change: disk changer with 8 tool positions - Tool holder: SK30 - Tool clamping: pneumatic - Coolant device: Micro-spray for flow drilling, cooling emulsion - Spindle speed: 80 - 6000 rpm - Speed correction: 80 - 120 % - Drilling capacity in St60/Alu Ø: up to 18 / 20 mm - Tapping capacity: up to M14 / M16 - Position measuring system: Rotary encoder - Positioning accuracy: 0.05 mm - Repeat accuracy: 0.025 mm - Machining accuracy tolerance: ± 0.2 mm - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per outlet: approx. 600 l/min at 6 bar - Noise emission: 79 dBA - Electrical connection: 3x 400 V ± 5% / 50-60 Hz - Back-up fuse: max. 25 A - Power consumption: approx. 13 kVA - Control voltage: 24 V DC - Space requirement with safety fence: approx. 34 square meters (11.4 x 3 m) - Machine weight with accessories: approx. 5000 kg

Year of construction: 2012, condition: used, Used machine Year of manufacture: 2012 Equipment and technical data: Axes: X-axis: - Max. workpiece length: unlimited - Min. workpiece length: 250 mm - Traverse speed: 0-25 m/min Y-axis: - Max. workpiece width: 1,000 mm - Min. workpiece width: 80 mm - Traverse speed: 0-50 m/min Z-axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 10 mm - Traverse speed: 0-20 m/min Minimum and maximum workpiece sizes depend on the weight and on the length-to-width ratio! Units: 16-fold drilling head: - Vertical spindles in X direction: 5 pcs. - Vertical spindles in Y direction: 5 pcs. - Horizontal double drilling spindle in X direction: 2+2 pcs. - Horizontal double drilling spindle in Y direction: 1+1 pcs. - Spindle spacing: 32 mm - Spindle speed: 4,000 rpm - Motor: 1.7 kW Grooving saw: - In X direction - Speed: 4,000 rpm - Max. saw blade diameter: 125 mm - Motor: 1.7 kW (Grooving saw is integrated in drilling head) Milling unit: - Speed: 1,000 to 18,000 rpm - Motor (frequency-controlled): 3.3 kW - Collet chuck: max. 25 mm - Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Extraction: - Volume: 2,000 m³/h - Air velocity: 25 - 30 m/sec - Extraction nozzle: 1 x 150 mm Ljdpfx Adjxya Rgjkerw Software: MASTERWORK-MACHINE VERSION Required air pressure: 8 bar Air consumption: max. 750 l/min Air tables in the working area Roller table at infeed and outfeed Additional foldable roller table at infeed Panel measuring sensor Ball screw spindle and linear guides Rack and pinion drive Central lubrication DXF file import Dimensions: 1,990 x 2,410 x 1,510 mm Weight: 1,300 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Lrjdpfxov Ai N Ue Adksw Storage location: Nattheim

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm Lrjdpfeghtvaox Adksw - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: like new (used), FEHLMANN PICOMAX 54 is a CNC milling machine delivering precision, high accuracy and dependable reliability. Capacities: drill in steel 28 mm, thread cutting M24, milling 100 cm3/min; spindle stroke 160 mm; table 880x320 mm; table–spindle 0–610 mm; travels X500 Y260 Z480 mm; table load 300 kg. Specs: spindle speeds stepless 50–7100 t/min; feeds X/Y 1–2000 mm/min Z 10–1200 mm/min; spindle power 8 kW; total power 10 kW; supply 3x400 V 50 Hz; weight ≈2150 kg; dims L2200xW1800xH2400 mm. Accessories: set of drill chucks, tool storage, lamp, set of toolholders, Renishaw touch probe. Achieves tight tolerances; suited for automotive, watchmaking, toolmaking, aerospace and medical. Lrsdpfxjxx U E As Adkew

Condition: new, I sell, milling machine new. Lredpfx Ajuuiytodkew

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift Ljdpfswhk Ubex Adkorw - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: good (used), In good technical condition and fully functional. Spindle speeds: 18. Speed range: 40–2000 rpm. Total power consumption: 2.2 kW. Machine weight approx. 1200 kg. Accessories. Lrodexx R Tvjpfx Adkew

Condition: good (used), EMCO Universal Milling Machine Type FB 3 (not a DECKEL FP 1) with 3-axis HEIDENHAIN Digital Readout Year of manufacture: 2007/2008 4 units available! Travels X/Y/Z: 300 x 200 x 350 mm Spindle taper Vertical/Horizontal: SK 30 DIN 2080 Tool clamping: manual Quill stroke: 45 mm Swiveling vertical milling head: +/- 90 degrees Lodpfx Adsxx R Itokorw Spindle power: 1.1/1.4 kW (60/100% duty cycle) Spindle speed Vertical/Horizontal: 80 – 2,200 rpm Gear stages: 8 Fixed angle table: 600 x 200 mm Infinitely variable feed rate (X/Y axis): 0–550 mm/min Rapid traverse (X/Y axis): 1200 mm/min Z-axis feed: manual Machine dimensions (W x D x H): 1150 x 1410 x 1550 mm Weight: approx. 500 kg Standard Equipment: - 3-axis HEIDENHAIN digital readout - Coolant system integrated in machine base - Angle table, manual central lubrication - Swiveling device for vertical spindle - Chip tray - Splash guard - CE conform Special Features: - HEIDENHAIN precision digital readout - Infinitely variable feed and rapid traverse on longitudinal and cross axes - Operator panel with user-friendly keyboard for easiest operation - Safety handwheels on all 3 axes - Adjustable precision tapered roller bearings - Adjustable, double-acting hardened gib strips - Removable coolant tank Application range: Ideal for instrument and prototype construction, training, workshops, and professional DIY The machines come from a training facility. Condition: good to very good Available from March 2026, possibly earlier by arrangement.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm Lredpfx Adowb Ha Tokjw – weight: 450 kg

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Lrsdpfxexx U Eco Adkjw

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table load: 11,000 kg, table length: 3,200 mm, spindle motor power: 30,000 W, Used MTE fixed-bed milling machine model BF 3200 with: - X-axis travel 3000 mm - Y-axis travel 1200 mm - Z-axis travel 1250 mm - Heidenhain 530 CNC control - Automatic universal head 2.5° x 2.5° Ledpfxjxx Rhge Adkerw - Random 24-position tool magazine with arm - Prepared for 4th axis - Chip conveyor - Standard accessories - Year of manufacture 2005 Free 12/24 month financing available

Condition: used, Year of construction: 2011, - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods on all axes - Ball screws - Hydraulic tool retractor - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened guideways - Plastic-coated counter guide - Electromagnet. Main spindle brake - Automatic central lubrication system - Integrated coolant system - Steel telescopic cover for transverse travel - Steel telescopic cover for longitudinal travel - Work light - Year of manufacture 2011 Specifications Worktable: - Table clamping area: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel paths: - X-axis - Longitudinal travel: 1250 mm Ledpjwf Ntqsfx Adkorw - Y-axis - Transverse travel: 540 mm - Y-axis - Transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and column: 500 mm Column: - Z-axis - Vertical travel: 550 mm - Distance between spindle nose and table with vertical head position: approx. 50 - 600 mm - Distance between spindle nose and table with horizontal head position: approx. 360 mm 910 mm Milling spindle: - Tool holder: DIN 2080 ISO 50 - Speed range: 40 - 2000 rpm Feeds and rapid traverse rates: - Longitudinal/transverse feed: 4000 mm/min - Vertical movement (column): 2000 mm/min - Rapid traverse longitudinal/transverse: 4000 mm/min - Rapid traverse vertical: 2000 mm/min Motors: - Milling spindle motor: 11 kW - Feed motors for X/Y/Z axes: 1.5 kW each - Coolant pump: 0.12 kW - Lubricant pump: 12 W Installation: - Dimensions W x H x D: 3000 x 1880 x 2660 mm - Net weight of the machine: approx. 3800 kg

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm Ledpfx Adovhfqrekorw - Weight: approx. 1300 kg

Condition: used, Year of construction: 2007, Urban AP 6500 F - travelling column milling machine - Heidenhain path control iTNC 530, control panel can be moved over the entire machining length - robust basic structure as a welded frame construction - ball rail guides on all axes - milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y-/Z-axis with recirculating ball screw (20 m/min) - 6 chip drawers - swivel clamping device for 6200 mm workpiece length - 12 pneumatic workpiece clamps - manually operated central lubrication - moving plate tool changer for 8 tools - micro spray - cooling emulsion pump - machine light - safety fence - safety bumper - safety light grid - machine protection hood opens pneumatically vertically - control on: 33922 h - Program run: 9847 h - Spindle on: 7221 h - Year of manufacture 2007 Technical data - Travel paths X/Y/Z: 6500 / 275 / 310 mm - Working area X/Y/Z with swivel device: 6200 / 155 / 110 mm - Rapid traverse X/Y/Z: 30 / 10 / 10 m/min - Continuous feed: 0 - 5000 mm/min - Tool change: Disc changer with 8 tool positions - Tool holder: SK30 - Tool clamping: pneumatic - Coolant system: Micro-spray for flow drilling, cooling emulsion Lrsdju Awm Sepfx Adksw - Spindle speed: 80 - 6000 rpm - Speed correction: 80 - 120 % - Drilling capacity in St60/Alu Ø: up to 18 / 20 mm - Thread cutting capacity: up to M14 / M16 - Position measuring system: rotary encoder - Positioning accuracy: 0.05 mm - Repeatability: 0.025 mm - Machining accuracy tolerance: ± 0.2 mm - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Noise emission: 79 dBA - Motor power: 15 kW - Electrical connection: 3x 400 V ± 5% / 50-60 Hz - Pre-fuse: max. 25 A - Power consumption: approx. 13 kVA - Control voltage: 24 V DC - Space requirement with safety fence: approx. 34 m² (11.4 x 3 m) - Machine weight with accessories: approx. 5000 kg

Condition: used, Year of construction: 1999, automatic feed in all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture 1999 Specifications Working area: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - Number/distance/size of T-slots: 5 / 50 mm / 14H8 Fixed clamping surface of the angle table: - Length x width: 800 x 400 mm - Number/distance/width of T-slots: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Feed levels: 18 - Feed range of X and Y axes: 16 - 800 mm/min - Feed range of Z axes: 8 - 400 mm/min - Rapid traverse of X and Y axes: 2000 mm/min - Rapid traverse of Z axes: 1000 mm/min - Maximum feed force of X and Y axes: 8 + 4 kN - Maximum feed force of Z axes: 10 + 5 kN Drive and speed of horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Speed levels: 18 - Speed range: 63 - 3150 rpm - Maximum permissible torque on the spindle clamp: 500 Nm - Tapered bore in the spindle: SK40 Hydraulic unit: Lsdpfx Adovtzkxjkerw - Operating pressure of tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump flow rate: 2.3 l/min Cooling device: - Pump motor power: 0.09 kW - Pump operating pressure: 0.04 MPa - Maximum amount of liquid pumped by the pump: 25 l/min - Maximum amount of liquid at the outlet: 7 l/min - Tank capacity: 40 l Required power supply: - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user-side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions WxHxD: 1975 x 1910 x 1810 mm - Machine weight including angle table and vertical milling head: 2200 kg

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes - year of construction 1987 Technical data Working range: - X-axis (longitudinal): 485 mm Lrodpfx Adju Awlzokjw - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 - Tool holder: SK40 (M16) - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²

Condition: used, Year of construction: 2001, - 3-axis position display - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Infinitely variable speeds with 2 speed ranges - Horizontal milling attachment - Hydraulic tool clamping - 11 kW drive - Automatic central lubrication - Coolant system - Table guard - CE certification - Including milling tools - Including operating manual and documentation - Year of manufacture: 2001 - Complete service performed Lrjdpfxowkvlkj Adkew Technical Data Work Table: - Clamping surface: 1500 x 360 mm - Table load capacity: 800 kg Travel: - X-axis longitudinal: 1000 mm - Y-axis cross: 540 mm - Z-axis vertical: 430 mm Working Area: - Distance spindle nose / table: 50 - 480 mm - Distance spindle center / column: 350 mm Feeds: - Number of feeds: infinitely variable - Feed longitudinal / cross: 16 - 1200 mm/min - Feed vertical: 8 - 450 mm/min - Rapid traverse longitudinal / cross: 2500 mm/min - Rapid traverse vertical: 1000 mm/min - Feed motors: 3 x 1.5 kW Main Spindle: - Number of speed steps: 12 - Speed range: 40 - 1750 rpm - Graduation: 160, 225, 315, 440, 620, 880, 1240, 1750 - Drive power: 11 kW - Spindle taper: ISO50 DIN2080 - Milling head overhang: 420 mm Dimensions and Weights: - Machine footprint: 3050 x 2150 mm - Machine dimensions: 2050 x 2210 x 1830 mm - Machine weight: 2800 kg