Used Camshaft Milling Machine for sale (91,760)

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Celhcdwswm Elfjyohd Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Condition: excellent (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, empty load weight: 8,000 kg, machine base height: 3,940 mm, spindle motor power: 4,000 W, milling length: 5,920 mm, Döküm Gövde (LCD) Dokunmatik ekran ve CNC-Kontrol unitesi Otomatik CNC- Rektefiyeleme sistemi İnterpilasyon işlemi ile otomatik silindir rektefiyeleme özelliği (Opsiyonel) X-Y-Z Eksenler AC/Servo motor kontrol Elektornik el çarkı X-Y-Z eksenleri için (Hız ayarlı) Hassas elektronik cetvel (X,Y,Z eksenler) Silindir rektefiye ve Yüzey tarama işlemleri similasyon özelligi (Opsiyonel) Hareketli rektefiye başlığı değiştirme robotu (Opsiyonel) Fener mili aşağı ve yukarı hareketi hız ayarlı Elektonik hız ayarlı fener mili (Elk.El çarkı ile fener mili kontölü) Yüzey tarama sırasında tabla hız ayarı değiştirme sistemi Hareketli LED aydınlatma sistemi. Hazır katerli elmas sistemi Dik sütun kızak koruma perdesi Dik sütun(Z-Eksen) V kızak sistemi Tabla kızakları(X-Y eksen) Linear Kızak ve otomatik yağlama sistemi. Elektrik paneli iç aydınlatma Rektefiye başlığı bilyali sistem Fener mili aşağı ve yukarı hareketi bilyali vidali mil ve otomatik yağlama Tabla ileri-geri ve sag-sol hareketleri bilyallı vidali mil ve otomatik yağlama(X-Y Eksenler) Zaman ayarlanabilir otomatik yağlama sistemi Cholhcdexpwfaswysd Elektonik el çarkı Hız ayarlı ve 3 eksen kontrollü (X,Y,Z) İnternet Erişimi ve uzaktan erişim İndustry 4.0 uyumluluk Dik sütun servis merdiveni

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Celhsxftqdocdwyshd Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Cjlhowtnxnjcdwyshd Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm max. werkstukhoogte: 3500 mm Cjlhsv Sfk Hscdwyehd Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen - 1 meetsonde Freeskop: -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, overall weight: 13,000 kg, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 1,100 mm Z-axis travel: 500 mm C-axis rotation: 360° Tool magazine: 32 pcs. MACHINE DETAILS Number of axes: 3 Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Weight: 13,000 kg Chslhcsxrb Absdwysd EQUIPMENT Chip conveyor Probe Documentation CE marking

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Cjljxr U Drshcdwyohd Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15105602, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, number of slots in tool magazine: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified timeframe between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max.): 9,200 rpm Spindle speed (min.): 50 rpm Tool holder diameter: 30 mm Number of magazine tool slots: 32 Max. tool length: 260 mm Max. tool diameter without empty adjacent slots: 63 mm Table width: 410 mm Table length: 1,230 mm Cjlhexm S R Eocdwyshd Table load capacity: 250 kg CNC control manufacturer: HEIDENHAIN MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance floor to coordinate table: 1,010 mm Distance coordinate table to spindle nose: 125 to 620 mm Horizontal reach: 370 mm EQUIPMENT Documentation/manual Infinitely variable spindle speed FEHLMANN dividing unit (4th axis) 126 SK 30 tool holders Supplementary documentation

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, TECHNICAL DETAILS Axes: 5 controlled Cholhcdjxtb Sxewyjd X travel: 4,000 mm Y travel: 3,400 mm Column clearance: 2,000 mm Z travel: 1,000 mm Control: Siemens 840D SL Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size (longitudinal): 3,000 mm Table size (cross): 1,500 mm C-axis swivel range: 0–360° (in 1° increments) Swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS Total power requirement: 70 kVA Machine weight: approx. 82 t Footprint: approx. 10,200 mm x 7,200 mm x 5,925 mm EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Cheloxtbtijhcdwyed Spiral chip conveyor

Condition: used, Year of construction: 2018, Operating hours: 600 h Technical specifications: Travel distance X/Y/Z: 450 / 350 / 400 mm Distance spindle nose to table: 230 - 630 mm (horizontal milling spindle) Chjlhcjxu I Txodwyod Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: stepless 10 - 2000 mm/min Max. feed force X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (fixed angle table) Max. table load: 30 kg (fixed angle table) Vertical milling head: Speed range: 10 - 5000 rpm Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270 kg Equipment: - Swiveling control panel - Shafts and gears hardened and ground - Sinumerik 828D digital display - Main spindle with clockwise/counter-clockwise rotation - Linear guides - Milling spindle with fourfold bearing (radial/axial) - All pinch points protected by covers - Main motor with spindle brake

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: Cjlhcder Hbf Towyjhd >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: good (used), spindle moulder, spindle moulder Cholhcjwha Nbsdwyjd -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, table width: 1,000 mm, table load: 7,000 kg, table length: 4,100 mm, X-Axis 4000 mm Y-Axis 1200 mm Z-Axis 1500 mm Table Length 4100 mm Table Width 1000 mm Table load 7000 Power on spindle 34,5 kW Spindle speeds 3000 Rpm Spindle Taper 50 ISO/Bt/Mk Feed rate X-Axis 20000 mm/min. Feed rate Y-Axis 20000 mm/min. Feed rate Z-Axis 20000 mm/min. Millinghead auto-index 2.5 x 2.5 ° Working hours 10700 H Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Chelhcdwsxuqvieyed

Condition: ready for operation (used), Year of construction: 2022, Movement Chjlhcoxtgm Ujdwyed X-Axis Movement 3600 Y-Axis Movement 1800 Z-Axis Movement 1200 B-Axis Movement ±120° C-Axis Movement ±270° This 5-axis CMS ARES-3618-TR-PX5-Z1200 was manufactured in 2022. It features a movable bridge design, fixed table, and all axes interpolated. The machine offers a rapid traverse of 80 m/min (X, Y) and 70 m/min (Z), with a spindle speed up to 24,000 rpm. Dual-table NC-controlled platform enhances versatility. If you are looking to get high quality milling capabilities consider the CMS ARES-3618-TR-PX5-Z1200 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head Celhcdweuxprloyshd About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Cslhcdsu Um Erewyshd >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake Cslhcdjtwlwzowyohd >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table Chelhjvyr R Nocdwyed >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: Chslhcou I Rm Njdwysd >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper Colhexuppujcdwyehd • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control, Excellent Condition, CE Certified, from Training Workshop!! Technical Data: >> Year of Manufacture: 2010 Machine No.: 347281 >> Fixed angle table >> Infinitely variable spindle speed up to 4500 rpm >> Infinitely variable feed rate in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis: 5000 mm/min Z axis: 4000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table size: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories & Equipment: >> Heidenhain TNC 320 contour control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, manual for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: Chelhcdjxupd Sowyed Offered is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition, having only been used for training purposes and with very few operating hours. The control system is very user-friendly. The machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple, facilitated by folding away the vertical head. The guideways are regularly lubricated via central lubrication. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control are available. The machines are immediately available.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Data: - Year of manufacture: 2010 Machine No. 347284 - Fixed angular table - Spindle speed: Infinitely variable up to 4500 rpm - Feed rate: Infinitely variable in 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min - Rapid traverse Z axis: 4000 mm/min - Travel distances X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm Chslhcdwjxupdlsyed - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1800 kg - Overall dimensions approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Equipment: - Heidenhain TNC 320 path control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operating manual, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very user-friendly. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the folding vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power on site. Seven units of the Kunzmann WF4/3 with TNC 320 Heidenhain milling machines are available. The machines are ready for immediate delivery.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm Chjlhcdwsxupc Usyed >> Vertical and horizontal quill - SK40 >> Hydraulic tool clamping system >> Weight: approx. 1,800 kg >> Space requirement: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Features: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping for vertical and horizontal axes >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition, with very few operating hours. Previously used exclusively for training purposes, it features a highly user-friendly control system. The machine offers hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal milling is extremely easy via the tilting vertical head. Guideways are continuously lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann machine under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain controls are available. The machines are immediately available.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347285 >> Fixed angle table >> Infinitely variable spindle speed up to 4500 rpm >> Infinitely variable feed on 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis: 5000 mm/min, Z axis: 4000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1800 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping, vertical and horizontal >> Automatic centralized lubrication system Coljxupczjhcdwyshd >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is straightforward thanks to the fold-away vertical head. The guides are regularly lubricated via the centralized lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to view and test the Kunzmann under power at our premises. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 control are available. The machines are available for immediate delivery.