Universal Milling Machine

SIXIS

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 410 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 120 rpm, type of input current: three-phase, table length: 670 mm, table width: 300 mm, Sixis S-103-R 3 Phase 380v motor runs fine. 9 Spindle speeds adjustable from 120 up to 2400 RPM. Power feed on the X & Z axis. Laodpfx Aowbkpfonuec Stepless adjustable feed rate. Axis travel: X: 450mm Y: 170mm Z: 410mm Table can also slide over the apron. Table size: 670x300mm Head is under degree adjustable. ISO30 Spindle intake. Coolant pump in machine base. Overall dimensions: 115x110x150cm Swiss made machine tool. Include's accessories as shown on pictures! Contact us for shipping options! €4,750.00

Condition: repair required (used), Nice wheel loader – starts, drives, and brakes well. Year of manufacture: 2004. Hours unknown. Extra function. Lighting does not work. Comes with Dutch registration. Needs some work. Quick coupler does not release properly, it's stuck (jamming?). Lsdpfx Asywfp Eonueac

Condition: good (used), UNIVERSAL MILLING MACHINE "SIXIS" S-103 spindle head ISO 30, standard fix table with 7 T-slots Manufacturing origin CH Custom position 8459.6930 TECHNICAL DATA Table travel Longitudinal by hand and automatic 450 or 300 mm 1 Handwheel turn 4 mm 1 division at nonius 2/100 mm Vertical by hand and automatic 400 mm 1 handwheel turn 2 mm 1 division at nonius 2/100 mm Automatic feeds Longitudinal = 8 possibilities 12-19-30-45-63-96-150-216 mm/min Vertical = possibilities 6-9,5-15-22,5-31,5-48-75-108 mm/min Rapid feeds Rapid travel by front pedal Horizontal 1000 mm/min Vertical 500 mm/min Headstock Travel in the axial way of arbor only by hand 175 mm 1 handweel turn 4 mm 1 division at nonius 2/100 mm Spindle speeds controlled by pulleys and gearbox a.spindle motor 1400 min-1 9 speed scales 60-90-130-175-265-390-530-800 et 1200 min-1 b.spindle motor 2800 min-1 9 speed scales 120-180-260-350-780-1060-1600 et 2400 min-1 c.2-speeds spindle motor 18 speeds – above scales a. and b. Spindle taper ISO 30 or ISO 40 errors and omissions excepted-data given without obligation Lasdped Aly Aofx Anuoc Inventory Nr.2170110, machine’s accessories list : 1 vertical milling head ISO 30 1 standard fix table with 7 T-slots 4 short mill-fittings ISO 30 1 collet holder ISO30/E32 2 reduction sleeves MT2+MT3 1 boring head ISO 30 3 mills 1 stay

Condition: new, functionality: fully functional, machine/vehicle number: 07, UNIVERSAL MILLING MACHINE "SIXIS" TYPE S1101 with simple table 300 x 120 mm (201) and vertical milling support (211) Machine is new 4 machines on stock new Manufacturing number 07 Manufacturing origin Swiss Lsdpfsb Axrmox Anujac TECHNICAL DATA Feeds : longitudinal 150 mm transverse 100 mm vertical 150 mm Drive Motor 2800 rpm 0,33 HP Spindle speeds with gearbox rpm. 125-250-500-1000-2000-4000 External diameter of quill 55 mm Takes collets W-12 BENCH TYPE : Net weight 58 kg CABINET TYPE : Net weight 110 kg errors and omissions excepted data given without obligation

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine Lasdpfx Anjirax Uouoc -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: new, Modern, precision pillar drilling machine based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and series-standard chip breakage control. The digital display shows feed rate, speed, and drilling depth. Reversible switch for right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with special equipment including a threading unit, single-cut function, and LED lamp. Normal drilling capacity in E 335: 30 mm Threading capacity: M 20 Spindle: MK 3 Feed rate steplessly adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Overhang: 260 mm Ledpfx Asf Ey Aujnueac Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Motor with pole change: 0.8/1.5 kW Spindle speeds steplessly adjustable: Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Threading unit - Single-cut function - LED lamp

Condition: used, Year of construction: 2000, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1.500 mm center height over bed 220 mm digital readout FAGOR 3 Achsen turning diameter in the gap 620 mm centre distance 1.500 mm bed width 280 mm Ljdpfx Ajykb Hfjnuoac spindle bore Ø 52 mm turning speed range 30 - 2.360 U/min 3-jaw-chuck diameter 250 mm quick change toolholder KLOPFER Typ GX2B drive capacity - spindle motor 6,3 kW taper in tailstock-quill MK 4 dia. of quill 60 mm quill stroke 200 mm voltage 380 V total power requirement 6,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition Lasdpox Tp U Refx Anuec - available immediately

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system Lsdpfx Aow Rlvqenusac - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: used, Technical details: Lasdpfx Ajwc R Udsnujc welding current: 520 A Length: 1200 mm height: 1100 mm weight of the machine approx.: 147 kg dimensions L x W x H: 1,2 x 0,75 x1,1 m Welding process TIG/E/MIG-MAG Delivery consists of: Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *