Used Milling Cnc Machine for sale (64,792)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC Hjdpfx Agsyahv So Uon CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Hsdpfxsy Ni Ivs Ag Usn Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS Hodpfx Agjy R Dn Hs Ujn X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Hsdpfxozauvfs Ag Uen Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1999, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 800 mm, spindle speed (max.): 14,000 rpm, total height: 3,720 mm, total width: 4,520 mm, total length: 7,200 mm, For sale is a powerful CNC machining center (milling center) with a moving ram. It is in fully functional condition. Please note the integrated high-speed vertical spindle with up to 14,000 rpm, as well as the powerful SIEMENS 840D CNC control with integrated rotary table for complex multi-axis interpolations. Technical data: Year of manufacture: 1999 Control: Haidenhain TNC 430 X-axis: 1,200 mm Y-axis: 700 mm Z-axis: 800 mm Rapid traverse: 30,000 mm/min Working feed rate: stepless, max. 30,000 mm/min Spindle speed: steplessly adjustable, 100 – 14,000 rpm Max. drive power: 25 kW Max. torque: 250 Nm Speed: 14,000 rpm Tool holder: HSK A 63 Integrated rotary table dimensions: 800 x 700 mm Max. workpiece size: Ø 900 mm Machine dimensions: 7,200 x 4,520 x 3,720 mm Weight: 17,500 kg Equipment & accessories included in the offer: Automatic central lubrication Chip conveyor Hodpfxszadi Is Ag Uen Coolant tank / coolant supply Accessories not included: Clamping devices, zero-point clamping systems, chip collection trays, tool holders Transport and loading can be arranged upon request, for an additional fee, throughout Europe. Prices do not include VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact details, please visit our website.

Condition: used, Year of construction: 2018, machine/vehicle number: Q4A181101, SIEMENS SINUMERIK 828d control system, travel ranges X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-position tool changer SK30, rigid tool clamping plate, chip conveyor KABELSCHLEPP, coolant system. Hjdpfjy U R Rcsx Ag Ujn

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Hjdpfxszaqbqo Ag Uon Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2000, Immediately available from location: Hjdpfxjzaqbke Ag Usn CNC bed-type milling machine MTE Model Kompakt Plus Year of manufacture 2000 Heidenhain TNC 410 Table 2200 x 750 mm Travel X/Y/Z 2000/800/800 mm Table load capacity 4 t Spindle taper SK 50 Hydraulic tool clamping Spindle speeds 40 – 2500 rpm Spindle power 15 kW Total power requirement 30 kW Coolant system Weight 12 t At a price of EUR 11,000—plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Hjdpfx Agszaqaas Ujn Price: EUR 2,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Hsdpfjzap Uisx Ag Usn

Condition: good (used), Year of construction: 2001, CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Hjdpfx Agjd Erane Ujn Machine with full enclosure. Machine card see more data. Machine in good condition.

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. With counter bearing for horizontal milling. Hodpfeich Ehjx Ag Usn Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration.

Condition: good (used), Year of construction: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Hedpoiihxhofx Ag Ujn Good general condition.

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Only spare parts Please ask what you need. Hjdodtdahjpfx Ag Uon

Condition: good (used), Year of construction: 1988, CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Hodpfxjbu Em Ao Ag Ujn Installed. Good general condition. Machine can be run under current.

Condition: good (used), Year of construction: 1990, CNC milling machine Fab.TOS type: FGS40CNC Control Haidenhein TNC 355 BJ. 1990 Procedures: X1000mm Y500mm Z500mm Hsdpfxodtfhqo Ag Uon Spindle retainer: ISO 50.

Condition: used, Year of construction: 1995, functionality: fully functional, travel distance X-axis: 6,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 10 rpm, table width: 1,000 mm, table length: 8,000 mm, CNC Bed Milling Machine Zayer MF3 8000 CNC For sale: bed milling machine from the well-known manufacturer Zayer, model MF3 8000 CNC, production year 1995. The machine is designed for machining large and long workpieces, ensuring high precision and rigidity. Technical specifications: Travels X/Y/Z: 6300 x 1100 x 1500 mm Table size: 8000 x 1000 mm Hodpfxeyw N Raj Ag Uon Spindle speed: 10 – 1800 rpm Spindle power: 18.5 kW Spindle taper: ISO 50 CNC control: Heidenhain TNC 320 Universal milling head: 360° swivelling Machine in very good technical condition, ready for operation.

Condition: good (used), Year of construction: 1992, Table clamping surface 1850 x 710 mm Permissible table load 3000 kg Travels: Longitudinal, automatic (X) 1600 mm Transverse, automatic (Y) 710 mm Vertical, automatic (Z) 850 mm Spindle holder SK 50 Speed range 20 - 3000 rpm Main motor power, AC 15 kW Transport dimensions L x W x H 3650 x 2300 x 2700 mm Weight 9400 kg Accessories / Special features: - CNC contouring control make HEIDENHAIN model TNC 360 with 3 scales - Programming language "plain text dialog" and DIN-ISO - Electronic handwheel HEIDENHAIN HR 330 with magnetic holder Hedpfxsttamko Ag Uon - 3-D touch probe HEIDENHAIN TS 120 - Main spindle compact unit RAC 3 - Control prepared for 4th axis - Universal milling head system "HURON with 2 levels, oil lubricated - Hydr. tool clamping - Coolant device - Central lubrication with interval - German electrics, INDRAMAT drives - Suspended control panel Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible. Hjdezadkrjpfx Ag Usn

Year of construction: 1987, condition: ready for operation (used), Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible. Hedpfx Agezadk Ss Usn

Year of construction: 2016, operating hours: 17,607 h, condition: used, machine/vehicle number: 7975, Control system: HEIDENHAIN TNC640, travel range X/Y/Z: 10,000 x 1,300 x 2,200 mm, swiveling head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: AXA FSB 300/TLG.63, serial number: 173492-2, year of manufacture: 2016, filter system: JUMA+GAIN, serial number: 8276, capacity: 100 l/min, year of manufacture: 2016, including 2 90° stands. Hjdpfsy T Nyaex Ag Usn

Condition: used, Year of construction: 2014, operating hours: 33,100 h, machine/vehicle number: 2941, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 3,500 x 1,200 x 1,250 mm, swivel head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: URRETXU 11-20132, serial number: 4855492004U5E2, filter system: JUMA+GAIN, serial number: 7136, capacity: 60 l/min, year of manufacture: 2013. Hsdpjy T Nx Nsfx Ag Ujn

Condition: used, Year of construction: 2021, operating hours: 13,640 h, machine/vehicle number: 21121341, Catalog No.: 1.2, 3 shielded machining centers with plexiglass windows, each 250x300 cm, HEIDENHAIN TNC-640 control system, 6 controlled axes, tool holder SK50, table surface: 9,000x2,000 mm, max. table load: 30 tons, travel distances X/Y/Z: 8,000/1,300/2,500 mm, special equipment: universal milling head that automatically pivots continuously in 2 planes, internal coolant system, 60-position tool changer, rotary table (10 tons, 1,500x1,500 mm), clamping surface, continuously positionable, measuring probe RENISHAW, 4 clamping angles, external programming option via Mastercam, subject to prior sale. Hjdpfx Asy T Nx Asg Ujn

Condition: new, Year of construction: 2018, I sell the throughfeed CNC drilling machine MAGGI Boring Evolution 1000 Router, Year 2018. New machine from showroom ! Configuration: Milling head motor 3,3kW / 24.000 rpm 11 + 4 + 2 pcs. drilling units Hedsy U Er Uepfx Ag Usn Grooving saw 1 pc. Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Max. Working width 1200mm Max. Element thickness 40mm Total area covered: 2200 x 1400mm / Only 3m2 Total weight: 1350 kg. With full documentation and CE. Tools included and programmed. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2018, I sell the throughfeed CNC drilling machine HIRZT Imaco MAGGI Unica F12, Year 2018. New machine from showroom ! Configuration: Milling head motor 2,2kW / 18.000 rpm 14 + 6 + 2 pcs. drilling units Grooving saw 1 pc. Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Max. Working width 1200mm Max. Element thickness 40mm Total area covered: 2600 x 1300mm Total weight: 1650 kg. Hedpfx Asy U Elusg Uon With full documentation and CE. Tools included and programmed. Very good condition. Available immediately.