Used Camshaft Grinding Machine for sale (64,794)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,780 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding wheel diameter: 660 mm, center height: 270 mm, center width: 1,700 mm, grinding diameter: 300 mm, spindle speed (max.): 1,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hodpfszarx Dsx Agmonn Workpiece Grinding diameter in rotary grinding, max.: 220 mm Grinding diameter in cylinder grinding, max.: 300 mm Rotary diameter over table, max.: 300 mm Passage in the steady rest, min. / max.: 20 / 90 mm Workpiece weight between centers, max.: 150 kg Center height above table: 270 mm Distance between centers: 1,700 mm Grinding length with fixed tailstock: 1,500 mm Grinding length with special equipment: 1,300 mm Diameter of the chuck: 180 mm Tailstock quill travel: 50 mm Grinding wheel Grinding wheel diameter, max.: 660 mm Grinding wheel width, min. / max.: 20 / 80 mm Peripheral speed, max.: 35 / 63 m/s Grinding wheel for concave cam profiles Diameter with electro spindle, min.: 100 mm Grinding wheel width, min. / max.: 20 / 50 mm Peripheral speed, max.: 35 / 50 m/s Grinding spindle head X-axis Travel: 490 mm Measuring resolution: 0.0001 mm Workpiece head C-axis Speed range of workpiece spindle: 1 - 1,000 rpm Speed range of contour grinding spindle: 1 - 400 rpm Torque on the spindle: 80 Nm Resolution: 0.0001 ° Table Z-axis Measuring resolution: 0.0001 mm MACHINE DETAILS Drive power of the motors Grinding spindle motor: 7.5 / 15 kW Workpiece motor, C-axis: 12 W Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Total weight: 9,850 kg EQUIPMENT Automatic balancing device, programmable Grinding spindle head X-axis with linear motor Optical scale on the X-axis Workpiece head C-axis with encoder Table Z-axis with linear motor Optical scale on the Z-axis Workpiece motor, direct drive type, C-axis Grinding spindle motor, direct drive type Fixed tailstock Tailstock quill Note: The machine can be powered up for inspection for an additional cost of approximately €12,000.

Condition: used, workpiece length 3250 mm swing diameter 630 mm grinding wheel diameter 900 mm Serveral Steadies Dresser Cooland System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Hnodpfx Asyqtubjgmsn Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, type of input current: three-phase, We offer this used Junker Jucam 5002/20 S camshaft grinding machine, year of manufacture 2000. Year of manufacture: 2000 Power rating: 60 kVA Hnsdjy Dv Sdopfx Agmen Rated voltage: 400 V Frequency: 50 Hz Control voltage: DC 24 V Fusing: 3×100 A Voltage before main switch (circuit F 001): 230 V Voltage before main switch (circuit F 002): 400 V Production information JUNKER GROUP Operating manual included 4. Technical Data 4.1 Electrical connection values Power supply: 400 V / 50 Hz Power: 60 kVA Fusing: 3 x 100 A Conductor cross-section: 5 x 35 mm² Cu 4.2 Mechanical Data Workpiece Workpiece diameter: approx. 100 mm Max. workpiece swing diameter: 150 mm Clamping length: max. 900 mm Z-axis traverse path: max. 1000 mm Max. workpiece swing diameter in steady rest area: 150 mm Loading system Manual, with loading and unloading device Workpiece spindle head Stationary Max. speed: 250 rpm Workpiece drive: frictional connection Workpiece spindle Dimensions: 210 x 700 mm Flange diameter: 180 mm Standard collar diameter: 127 mm Lubrication: oil lubrication Tailstock spindle Longitudinal adjustment manual via sprocket Fixed centre, special version MK 3–centre Clamping pressure adjustable via hydraulics Grinding table Z-axis feed (CNC-controlled) Grinding spindle headstock X-axis infeed (CNC-controlled) Horizontal swiveling B-axis (CNC-controlled) Grinding spindle II Dimensions: 205 x 450 mm Flange diameter: 190 mm Standard collar diameter: 127 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 30 kW Speed control with frequency converter Max. speed: 4,400 rpm Balancing: electronic Grinding wheel (Grinding spindle II) Type: Borazon (CBN), ceramic bond Diameter: Ø 400 mm Bore: Ø 127 mm Grinding wheel width: 18 mm and 16 mm Max. peripheral speed: 125 m/s Steady rest Type GR – 110 – NR Diameter range: Ø 30.1 – Ø 40 mm Wheel dressing Fine dressing (circumference and flank) with diamond dressing wheel mounted on dressing spindle: Ø 110 mm Dressing spindle Dimensions: 80 x 250 mm Flange diameter: 100 mm Standard collar diameter: 75 mm Lubrication: permanent grease lubrication Bearing seal with sealing air Set air pressure: see separate folder "Machine-specific data sheets" Drive: 1.8 kW Speed control with frequency converter Max. speed: 24,000 rpm Balancing: electronic If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Hodpfx Agsyycwfemonn Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: used, Year of construction: 2015, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 Hsdpfxeyycv Ue Agmenn grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Hodpfx Ajwynhvogmenn Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Hsdexf Ak Tepfx Agmenn Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Hedpoxx Uudefx Agmjnn Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 5,929 h, functionality: fully functional, center height: 100 mm, grinding length: 400 mm, center width: 400 mm, grinding wheel diameter: 350 mm, grinding wheel width: 30 mm, The machine was overhauled in 2026! TECHNICAL DETAILS Grinding length: 400 mm Center height: 100 mm Distance between centers: 400 mm Hnjdpfsza Ea Isx Agmon Max. workpiece weight in the tailstock between centers: 20 kg Grinding wheel diameter max.: 350 mm Grinding wheel width: 30 mm Grinding wheel bore: 127 mm Working feed rate Z-axis: 100 - 3,500 mm/min Table swivel: 0 - 30° Power of grinding spindle motor: 3 kW Speed of workpiece spindle: 30 - 1,200 rpm Power of workpiece spindle: 0.5 kW Tailstock arbor: MT2 Quill stroke: 20 mm MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,350 x 1,480 mm Weight: 1,600 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 011.257.90.043, center height: 175 mm, center width: 1,000 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Maximum center height: 175 mm Distance between centers: 1,000 mm Longitudinal slide Maximum longitudinal slide travel: 1,050 mm Hjdjzb Hxnepfx Agmjnn Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm Table tilt: max. 8.5° Cross slide Maximum cross slide travel: 275 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm MACHINE DETAILS Control system manufacturer: Fanuc

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! Hjdpezcwfuofx Agmonn TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Hedpfxozcwfns Agmsnn Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: used, type S2-900 / 190 DKGM In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Hedpfxox Ik Tks Agmjnn subject to prior sale!

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hjdpfsxzuyrjx Agmenn Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Tailstock Hnedpexzuylefx Agmsn - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders Hnodpfx Agsxuv Udjmon The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Hnsdpfxswwl N Sj Agmon Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1995, rotary table diameter 600 mm boring diameter 600 mm Hnjdpfsy Nfdaex Agmon grinding height 450 mm control Siemens Sinumerik 840 C total power requirement 30 kW weight of the machine ca. 14,5 t

Condition: used, Year of construction: 1986, workpiece diameter 5 - 250 mm grinding depth 100 mm clamping length 1200 mm spindle speed: 13600 / 27200 grinding range 10 - 50 mm Hnjdpfezd Hgvjx Agmen weight of the machine ca. 1,2 t dimensions of the machine ca. 1,2 x 1,0 x 2,0 m Very nice condition, including exhausting unit.

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 weight of the machine ca. 5,1 t Hnjdpozd Hgijfx Agmsn dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: excellent (used), Year of construction: 2001, Description to follow! Hnedpszd E Tzjfx Agmsn

Condition: used, functionality: fully functional, For sale is a high-precision universal and tool grinding machine, Strausak AG, Type 57U. Thanks to its versatile design with a cross table, it is ideal for tool, mold, and gauge manufacturing. It handles demanding grinding tasks on highly hardened workpieces (even in the range of 60–65 HRC) with absolute reliability. The spindle speed can be flexibly adjusted, and the maximum longitudinal travel of the X-axis is 600 mm with a center distance of 780 mm. The machine is in good condition. Machine Type 57U Manufacturing No. (Serial Number) 10686 Order No. 44137 Voltage (Volts) 380 V Frequency (Hz) 50 Hz Technical Feature Specification Max. Table Stroke / Longitudinal Travel (X-axis) 600 mm Center Distance (Workpiece Length max.) 780 mm Center Height 125 mm – 175 mm (depending on height blocks) Max. Grinding Diameter approx. 348 mm Table Dimensions 1,030 mm x 214 mm Table Swivel Range ± 9° Machine Weight (Net) approx. 2,500 kg (Shipping Weight approx. 2,700–2,800 kg) Net Machine Dimensions (L x W x H) approx. 2.30 m x 1.50 m x 1.50 m Recommended Space Requirement (Installation) at least 3.50 m x 2.50 m Spindle Speeds Continuously variable / Belt stages from 2,250 to 6,000 rpm Table Feed Continuously adjustable from 0 to 16 mm/min Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Hnedpfx Aov E Ivfjgmen For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2024, operating hours: 12,675 h, functionality: fully functional, A total of four identical KAPP gear grinding machines are for sale. KAPP NILES KX 260 TWIN Machine type: CNC gear grinding center / hobbing and profile grinding machine Manufacturer: KAPP NILES GmbH & Co. KG Number of machines for sale: 4 Address according to nameplate: Callenberger Straße 52, 96450 Coburg, Germany Model: KX 260 TWIN OEM machine number: XXX Hnjdpfx Agjzdv Shomen Year of manufacture: 2024 Inventory No. PPS: XXX Control: Siemens SINUMERIK Machine concept: TWIN / dual-spindle concept with rotary table Machining process: continuous hobbing grinding, optional profile grinding Automation concept: automatic loading, robot cell / FANUC loader visible Robot: FANUC Robot M-710iC/45M visible Condition: machine is powered on / screen is active / very modern, clean overall impression Manufacturer's specifications KX 260 TWIN Max. face diameter: 260 mm Max. workpiece length: 770 mm Module range: 0.5 – 6 mm Max. gear width: 320 mm, with corresponding design up to 520 mm Max. helix angle: ±45° These values correspond to the KAPP-NILES-KX-TWIN series; KAPP NILES describes the KX 260 TWIN as a machine for continuous hobbing grinding with dressable and undressable tools and specifies exactly these limit values for the KX 260 TWIN. Technical machine concept According to KAPP NILES, the KX TWIN series is designed for high production volumes in the medium and large series production of gears and shafts. The concept includes two identical workpiece spindles, which are arranged opposite each other on a rotary table. While one workpiece is being machined, the second workpiece spindle can be loaded and unloaded in parallel and aligned. Equipment / visible features Siemens SINUMERIK CNC control KAPP NILES operating interface TWIN spindle concept / two workpiece spindles Rotary table / indexing table Automatic loading cell FANUC M-710iC/45M robot Robot gripper / handling gripper visible Protective housing / safety cell Grinding wheel mounting / grinding spindle area visible Profile / hobbing grinding area visible Coolant / grinding oil area Work area lighting Full protection cabin Manual control unit / electronic handwheel on the control panel Signal light / traffic light CE marking visible on the machine housing Documentation holder / machine documents visible on the machine Electrical data according to nameplate Normal supply: 400 V AC Frequency: 50 Hz Normal power supply voltage: 400 V AC Control voltage: 24 V DC Lighting: 22 W / 230 V Installed power: 110 kVA Rated current: 79 A cos φ: 0.64 Fuse: 100 A gL Control cabinet weight: 1,000 kg Operating hours according to the counter in the photo T1 Total operating time: approx. 12,675 h T2 Net operating time: approx. 5,538 h Additional photos and videos available upon request.

Condition: used, Year of construction: 2012, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control FANUC 0i-TD max. workpiece weight between centers 120 kg x-axis 285 mm z-axis 1150 mm grinding wheel size 500 x 100 x 203 mm turning speed range - workpiece spindle 1- 1500 U/min B- axe (turning) 240 (-15 to +225) ° turning speed range - power take off spindle 3200 U/min speeds of internal spindle 24000- 42000 U/min total power requirement 20 kVA weight of the machine ca. 5 t dimensions of the machine ca. 3,5 x 3 x 2 m Machine has Fanuc CNC control 0i-TD. Hedszdu Riepfx Agmjnn Machine comes with accessories (30 wheels and flanges), filtering arrangement and oil mist extractor. Machine has internal grinding unit and tail stock.

Condition: good (used), Year of construction: 1997, FOR SALE: CNC Vertical Gear Grinding Machine – GLEASON TAG 400 📊 Machine Capabilities (Gleason TAG 400 Specifications) Feature Technical Specification Workpiece Orientation Vertical (Clamped on a rotary table with an upper center) Maximum Workpiece Diameter 400 mm Maximum Tooth Width (Z-axis) 200 mm Hnedpfjzdt Igjx Agmen Admissible Module Range 0.5 to 8.0 mm Programmable Number of Teeth 6 to 600 teeth Maximum Helix Angle ± 45° (for helical gears) Pressure Angle 14.5° to 30° Center Distance (Maximum workpiece length) 200 to 800 mm Maximum Workpiece Weight Approx. 70 to 90 kg Total Machine Weight Approx. 9,000 kg BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT MACHINE TOOLS, ALL TYPES