Used Boring Device for sale (17,156)

Condition: used, Year of construction: 2017, Knoll Filtration System / Vacuum Filter Type: VRF 250 Areas of Application: - Cleaning of coolants and lubricants (KSS), emulsions, and cutting oils without the use of disposable filter materials. - Installation on machine tools for single machines, machine groups, and central systems. Function: A vacuum pump, directly connected to the inner chamber of a filter drum, draws the medium into the drum's interior. Contaminant particles are retained on the filter drum’s surface by a fine mesh. The vacuum level increases due to the resistance of the accumulating filter cake. Upon reaching an adjustable vacuum threshold, drum cleaning is performed automatically. An installed scraper chain transports the sludge out. Type: VRF 250 Design: AA Pjdpfx Adoxup I Dsnjgw Filtration capacity (emulsion/oil): 250 / 150 Inlet (DN): 50 Tank volume (l): 1350 / 1450 Shipping available by arrangement for a fee or collection possible.

Condition: used, Electric chain hoist crane DEMAG type PK1N-F serial no. 5533406 year of construction 1983 Load capacity 125 kg Hook path 3.8 meters Lifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length operating cylinder approx. 1.2 meters Pgedpfx Adsik Stfsnow 1 load line = 125 kg Mains connection 380 Volt, 50 Hz Weight: 25 kg good condition

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Pjdpou Swb Uofx Adnjgw Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Good condition

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG model DKUN 1-100 K V1 F4 Serial No. 61801899 Year of manufacture: 1997 Load capacity: 100 kg Hook path: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Podpjhtr Eysfx Adnjgw Control pendant cable length: approx. 1.7 meters Mains connection: 400 Volt, 50 Hz 1 chain fall = 100 kg Net weight: 16.5 kg Good condition

Condition: used, E-Chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS-control via crane system controller make no.61456646 year of construction 2003 lifting capacity: 200 kg hook path: 4,0 meter Main hoisting speed: 14,0 / 19,2 m/min. Fine lifting speed: 0,20 m/min. chain size 4,2 x 12,2 mm 1 load strand = 200 kg - with control logic DKES2/5 500V - without crane control - Dematik BUS control via crane system control - without roller trolley Pgodpogd Ipnjfx Adnjw Mains connection: 400 Volt, 50 Hz rated power: 750 W rated current: 2,4 A good condition

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Pgjdpfxsfbt Huo Adnew Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Pjdpelhwr Rjfx Adnjgw Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Electric chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1 Fab. No. 1524132 Year of construction 1997 lifting capacity 2000 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. load strands 2 Cable length control bottle approx. 0,9 meter rated power 1,6 kW / 0,36 kW Podpekwh H Aefx Adnegw Rated current 4.3 A / 2.5 A Mains connection 400 Volt, 50 Hz - Suspension eye on the top of the crane - emergency stop weight 75 kg good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator Pjdpfxjqa Txqe Adnogw - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Electric chain hoist ELEPHANT / FBH (Japan) type F(S)2-A(B4-B6)M(P-G) Serial no.: Year of manufacture: 1997 Load capacity: 2000 kg Lifting height: 2.6 meters Main lifting speed: 3.8 m/min Fine lifting speed: 1 m/min Chain size: 7.1 x 21 / Grade 8 Pedpfovcdv Asx Adnegw Pendant control cable length: approx. 2.5 meters Power supply: 400 Volt, 50 Hz 2 fall chains = 2000 kg - Emergency stop Own weight: 70 kg in good condition

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine Pgjdpfx Adjib D H Rsnjw - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type EM 25 Pgedpfshpf Ivox Adnew Serial no.: 24468 Year of construction 1998 Load capacity: 250 kg Hook path: 3.4 meters Main lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min. 1 load line = 250 kg Cable length operating cylinder: approx. 1.7 meters Mains connection: 400 Volt, 50 Hz - Suspension eye on the top of the crane - without trolley Weight: 24 kg good condition

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Pedpfx Aju T Ty Hjdnegw Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Fine lifting speed: 1.8 m/min Podpfoxcil Ssx Adnogw 1 load chain

Condition: used, Electric chain hoist, electric lifting device, crane HADEF Load capacity: 125 kg Hook path: 3.8 meters Pgedpfx Aexcil Eednsw Lifting speed: 10 m/min. Fine lifting speed: 3.3 m/min. 1 load strand

Condition: used, Electric chain hoist, electric lifting unit, crane STAHL Type R 12 Serial no.: 3437532 Year of manufacture: 1979 Load capacity: 1250 kg Hook travel: 2.4 meters Lifting speed with single fall: 8 m/min. Creeping speed with single fall: 2 m/min. Lifting speed with double fall: 4 m/min. Creeping speed with double fall: 1 m/min. 2 falls = 1250 kg Motor power: 1.25 / 0.25 kW Power supply: 380 Volt, 50 Hz - without chain container - trolley for KBK 2 – double girder overhead crane Trolley without the 4 KBK travel wheels in good condition Pgodjdz Sp Ispfx Adnew

Condition: used, Electric chain hoist, electric hoist, STAHL crane type Si T 201-10/2,5 No.: 1202373 Year of construction 1989 Load capacity 250 kg Hook path = lifting height 3.5 meters Lifting speed 10 m/min. Fine lifting speed 2.5 m/min. 2 load lines = 250 kg Cable length operating cylinder approx. 1.4 meters Mains connection 400 Volt, 50 Hz. Pgjdeg Rhx Ropfx Adnow - Suspension eye on the top of the crane Weight: 22 kg Good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines good condition Podpfsgi E Evsx Adnsgw

Condition: used, Electric Chain Hoist Crane DEMAG Type PM 8 - Manulift Serial No.: 5319450 Year of manufacture: 1979 Pgjdjxcbnlopfx Adnew Load capacity: 80 kg Hook travel: 2.9 meters Distance suspension to load hook: 700 mm Main lifting speed: 12 m/min. Fine lifting speed: 2 m/min. 1 load strand = 80 kg Manulift hand control located directly at the crane hook Power supply: 380 Volt, 50 Hz Weight: 20 kg Good condition

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Podpfx Ajxf Uqfodnogw Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition

Condition: used, E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4 Factory no.: 63207040 Year of manufacture: 1993 Load capacity 1000 kg Hook path 2.6 meters Distance from suspension to load hook 450 mm Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Cable length of control box approx. 1.7 meters Mains connection 400 volts, 50 Hz. 2 load strands = 1000 kg - Emergency stop Weight 46 kg good condition Pgodpfx Adjv Daqrensw

Condition: used, Electric chain hoist crane DEMAG Type PK2N-F Lifting capacity: 500 kg Hook travel: 3.5 meters Pjdoxcbm Iopfx Adnogw Distance from suspension to load hook: 500 mm Lifting speed: 5 m/min Fine lifting speed: 1.25 m/min Pendant control cable length: approx. 1 meter Motor power: 0.5 / 0.13 kW Power supply: 380 Volt, 50 Hz 2 load chains = 500 kg Net weight: 32.5 kg Good condition

Condition: used, Electric chain hoist crane DEMAG Type PK2-F Load capacity: 500 kg Hook travel: 2 meters Pgodpfexcbmzjx Adnsw Distance from suspension to load hook: 500 mm Lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: 1.7 meters Motor power: 0.5 / 0.13 kW Power supply: 380 Volt, 50 Hz 2 load strands = 500 kg Net weight: 34 kg Good condition

Condition: used, Electric chain hoist, electric hoist, crane SWF type presumably SKA 80.12 Year of manufacture: approx. 1995 Load capacity: 125 kg Hook path: 6 meters with fine lifting 1 load strand Power connection: 380 Volt, 50Hz Pjdpsxcit Nefx Adnegw

Condition: used, Electric chain hoist, electric lifting device, crane MAN GHH type SKA 83.12 Year of manufacture: approx. 1997 Load capacity: 125 kg Pjdpfx Aexcit Asdnsgw Hook path: 8.2 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min 1 load chain Power supply: 380 Volt, 50Hz