Used Boring Device for sale (15,845)

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and mortise drilling machine HOFFMANN HR 150 Very good condition, as new. The machine comes from an installation company and shows virtually no signs of use—absolutely like new. It was only used for minor modification work and is now being sold because it has been idle for the last few years. With this machine, you can mill mortises and drill dowel holes on two levels without reclamping. Supplied with documentation. - 380V, 1500W - 2840 RPM - Year of manufacture: 1997 With the machine, you can mill mortises for lock cases and similar applications, create all types of frame dowel joints at right angles, butt joints, and miters. Ideally suited for dowel joint production in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar uses. Thanks to two-level drilling, indexing stops, and machine design, dowel joints can be produced in the shortest time possible, making the machine highly economical. Requires 6 bar compressed air connection (very low air consumption). - Right-hand rotation - Mills and drills precisely and cleanly - Fitted with mobile base - Two stops left and right on the machine table; an additional 45° miter stop is included - Two fold-out workpiece supports Godpfx Ahjyhzilevsip - Comes with 3 drill chucks: for drills with a 16 mm or 12 mm shank, and for drills with M10 thread - Workpiece clamping is achieved with two pneumatic cylinders operated via foot pedal, allowing you to hold the workpiece with both hands - Height adjustment between drilling levels is also pneumatic; the control switch is positioned at the adjustment lever for the indexing rail, ensuring quick changeover between indexing positions and drilling levels - Equipped with a precision 12 mm indexing rail with a center position and 13 stops left and right - Both drilling levels feature highly accurate counters, allowing for quick, easy, and precise setting of each drilling level height - Can also be used as a mortise drilling machine, with two adjustable stops left and right, providing up to 500 mm of lateral travel - The machine features a fence at the front of the table, height-adjustable as needed - Max hole height approx. 100 mm - Max drilling depth approx. 150 mm, with depth stop - Max workpiece height approx. 250 mm - All functions operate perfectly The machine can be personally delivered and demonstrated anywhere in Germany for 220.00 EUR, so you take no risk with your purchase. Delivery to Austria, Switzerland, and the rest of Europe is also possible. Machine table is 1,100 mm wide and 250 mm deep Professional-grade machine, not DIY store quality Ready for immediate use Very robust and durable construction Precision guides with play-free ball bearing bushings are in perfect working order and move smoothly Very stable and torsion-resistant design

Condition: new, Year of construction: 2020, table load: 60,000 kg, load capacity: 60,000 kg, DEMMELER DRALT 2500 tilting rotary table. New, newer used stored in heated warehouse. Giodpfxjwdiwaj Ahvjp 2,500 x 2,500 mm, 60 ton. Linear travel 2,500 mm. Tilting 10°. Continues rotating. Linear measuring system Heidenhein LC 185.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 15,000 kg, spindle diameter: 150 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 3,000 rpm, table length: 2,000 mm, table width: 1,800 mm, drill spindle length: 900 mm, HEIDENHEIN iTNC 530. Giodev U D Ntepfx Ahvep ATC 60, X= 4.000 mm. Y= 3.000 mm. W, Tower= 2.000 mm. Z, Spindle= 900 mm. Rotary Table 1.800 x 2.300 mm, 15 Ton.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Gedpfx Aheyqmvxevsip Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Lifting capacity: 1,600 kg Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Gjdpoypw Hrsfx Ahvjip Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Space required L x W x H: 1100 x 700 x 600 mm Weight: 140 kg As-new condition – unused from stock

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, powered and can be tested. Control system Siemens SINUMERIK 840D, milling head HUI 50, 3 floor plates 6000x2000 mm, AVN 80 pcs. Work spindle diameter: 150 mm X-axis: 16,000 mm Y-axis: 4,000 mm Z-axis: 1,000 mm W: 800 mm Gijdpfx Asytdtmehvep AVN: 80 pcs

Condition: excellent (used), IM Very good condition. Gedpoytc Naefx Ahvsip

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Giedpovkdkijfx Ahvsp Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Power: 3.1 kW

Condition: like new (used), Year of construction: 2022, operating hours: 2,700 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 3,000 rpm, total height: 4,600 mm, total length: 7,200 mm, total width: 6,050 mm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 800 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, workpiece weight (max.): 12,000 kg, overall weight: 35,000 kg, Equipment: cabin, WHN 13 P CNC machine, completely overhauled and modernized by Fermat. Equipped with HEIDENHAIN TNC 640 control system with handwheel. The machine features high-pressure through-spindle tool cooling. ISO 50 spindle taper. The machine is connected to power and can be tested under working conditions. It is in like-new technical condition, manufactured in 2022, with 2,700 operating hours. Gjdpoytbqiefx Ahvjip

Condition: refurbished (used), Year of construction: 2007, turning length: 5,200 mm, turning diameter over cross slide: 1,140 mm, turning diameter: 1,140 mm, spindle motor power: 90,000 W, spindle speed (max.): 1,000 rpm, spindle bore: 245 mm, travel distance X-axis: 920 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 5,370 mm, mount diameter: 100 mm, rotational speed (max.): 3,200 rpm, torque: 730 Nm, spindle nose: B20, Equipment: rotational speed infinitely variable, WFL Millturn M120/5000 CNC TURNING-DRILLING-MILLING CENTER TYPE M120 MILLTURN WITH TAILSTOCK Gjdpoul S Eysfx Ahvjip AND SINUMERIK 840 D CONTROL SYSTEM

Condition: excellent (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servo motor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive Gijdpfx Aev Hxw Ajhvep -Manufacturer: EMG Eldro Electro-hydraulic lifting device unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Number: 4x lifting drive available -Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/piece

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; Gisdpop Stgnefx Ahvep - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. Godpjh Aw Rnofx Ahvsip It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 45,000 kg, empty load weight: 3,800 kg, total length: 8,000 mm, construction width: 2,500 mm, Special equipment Condition: Ready for use and fully operational Technical condition: Very good Giedpeyn St Dofx Ahvsp Multi-purpose spreader for reachstacker with 27 lifting eyes and 2 support stands

Condition: excellent (used), Manufacturer: Dörries Scharman Machine: Used CNC horizontal boring mill Type: Floor type Model: Heavycut 4.1 Year of manufacture: 1989 Condition: Used Total machine weight: 219 tons TECHNICAL DETAILS Gisdpfx Ahjyr S Icevop Travel distance X-axis: 14,000 mm Travel distance Y-axis: 6,000 mm Travel distance Z-axis: 2,500 mm Travel distance V-axis: 1,300 mm Feed length W-axis: 1,300 mm Maximum spindle speed: 630 rpm Spindle diameter: 250 mm Table load: 80 tons Table length: 3,000 mm Table width: 2,500 mm Control system: Number of axes: X, Y, Z, V, W (3+2)

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Motor output 5,5 kW Gsdpfx Ahoxzuxnevsip Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Condition: good (used), functionality: fully functional, The machine is in good technical condition; inspection is possible by appointment. Heidenhain i530, 1100 RPM, year of manufacture 1990, overhauled in 2005. Giedpfxjyr Sbco Ahvep

Condition: ready for operation (used), Haimer Powerclamp Premium Shrinking Device Tool Shrinking Machine Haimer Powerclamp Premium Shrinking Device: Suitable for tools: Carbide (HM), Ø3 - 32mm, h6; HSS + extensions, 3 - 32mm, h6 Power consumption: 13 kVA Clamping/unclamping time: approx. 5 seconds Dimensions: approx. 1100mm x 860mm x 1300mm Weight: approx. 100 kg Year of manufacture: 2014 High-Performance Cooling Unit Speed COOLER: Power consumption: 1 kVA Giedpfx Ahjyr Ntvovep Cooling time: 20 to 150 seconds Dimensions: 565mm x 440mm x 335mm Weight: approx. 45 kg Year of manufacture: 2014 Total dimensions with trolley: 860mm x 1100mm x 1900mm Weight with trolley: approx. 155 kg You are welcome to view the machine on site. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Prior sale reserved. Visit our shop for more offers and additional products. All company names and trademarks mentioned are the property of their respective owners and serve only for identification and description of the products. Deviations in technical data and errors in the item description may occur and are subject to change.

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, overall weight: 100 kg, total length: 700 mm, total width: 450 mm, total height: 1,350 mm, machine/vehicle number: 101, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gedpjyn Eprsfx Ahvsip Operating pressure: 6 to 7 bar MACHINE DETAILS Serial number: 101 Length: 700 mm Width: 450 mm Height: 1,350 mm Weight: 100 kg EQUIPMENT Base frame

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 105, total height: 1,200 mm, total length: 900 mm, total width: 400 mm, overall weight: 70 kg, No reserve price – guaranteed sale to the highest bidder! Submitting a bid requires timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Pressure: 6/7 bar MACHINE DETAILS Gijdpjyn Epfofx Ahvjp Dimensions & Weight Dimensions (L x W x H): 900 x 400 x 1,200 mm Weight: 70 kg EQUIPMENT Base frame External reference: Groven – Lot 15

Condition: used, Morbidelli line boring machine, price Ex Works. Gjdpfx Ajxp Hxcjhvjip

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 08649020, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 100 mm Weight: 10 kg External reference: Lot 18 / L.Schaible Giodpoyn Eb Uefx Ahvop

Condition: not inspected (used), functionality: unexamined, overall weight: 5 kg, tool type: SK 40, No reserve price – guaranteed sale to the highest bidder! Gjdpfx Ajyn Dycohvsip Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tool holder: SK40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 300 x 70 mm Weight: 5 kg EQUIPMENT 4 items in various designs (as-new condition) External reference: Large

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm CE compliant Work table dimensions: 287 x 550 mm Longitudinal travel: 200 mm Gijdpfsycg U Ejx Ahvep Vertical travel: 160 mm Cross travel: 125 mm Three-phase motor power: 1.8 kW, 400 V, 50 Hz

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, machine/vehicle number: 0500230, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Tank diameter: 540 mm Giedpoyn Aabefx Ahvop MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 1,500 mm Weight: 200 kg External reference: Pieper - Lot 86