Used Blow Moulding for sale (3,914)

Condition: new, Year of construction: 2024, Blow bars, manganese, unit weight approx. 415 kg, available immediately - subject to prior sale. (Pegson Trakpactor 1412, Hazemag AP-PH 1412, MFL 130/130, Kleemann Reiner 132.....) Hjdpfxjuy N R Ds Afijnu approx. 1325 x 360 x 115 mm

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1999 Operating hours: h Machine number: 178930 Type / Model: 270C-300-100 Clamping force: 30 t Min. mold installation height: 225 mm Max. opening stroke: 325 mm Max. platen distance: 500 mm Clear tie-bar distance: 270 x 270 mm Platen size: 400 x 400 mm Screw diameter: mm Max. dosing volume: 90 cm³ Shot weight PS: 80 g Holding force: 31 kN Connection: 25 kW Accessories/equipment: 1 core puller Condition: good Weight: 1.8 t Hsdpfxoxf Dxro Afienu Dimensions: 3,700 x 1,700 x 1,800 mm

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 2000 mm • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm Hsdpfxowd Sywj Afijnu 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm • Nozzle contact force: 210 kN • Ejector stroke: 400 mm • Ejector force: 385 kN ⚙️ Drive & Power • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Condition: new, Year of construction: 2025, Set of blow bars martensitic with double layer of ceramic for Metso 1213 crusher. We can also offer high chrome with ceramic for this machine Hsdpfx Aoihfc Sefienu All casting from EU foundries, best quality on the market We can also offer blow bars for all other machines like Tesab, Pegson, Rubblemaster, Hartl and many more

Year of construction: 2013, condition: ready for operation (used), Clamping force: 3200kN, screw diameter: 45mm, max. installation height: 800mm, tie bar distance: 720mm, core pulls: 1, control: Selogica, operating hours: 72520h, cycles: approx. 28 million. Documentation available. An on-site inspection is possible. Hjdexfvhlopfx Afionu

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: M08L/8623, Offer Number: M08L/8623 Machinetype: 4 die - 3 blow transfer header Info: PKO Make: ESSEBI Type: RCF 36-R Constr. year: 1993 diameter range: 3,8 - 6,5 number of dies: 4 number of stations: 4 cutting length: 52 mm shaft length under head: 6-35 mm output - pieces/min: 250 Hnodpewi Swmjfx Afisu press power: 55 to Location: In our warehouse

Condition: new, Year of construction: 2025, New BKS 400 and BKS 401 impact bars for, for example, the SBM 10/6/4 Export or Tesab RK 623, chrome-plated cast iron, dimensions approx. 610 x 264 x 123 mm, approx. 103-110 kg. Available for immediate delivery, subject to prior sale. Hnodpfx Aoq Ecw Hjfisu

Condition: used, Year of construction: 1999, Arburg 570 C 2000-675 Year of manufacture: 1999 Clamping force: 2000 kN Distance between tie bars: 570 x 570 mm Mould mounting platens (W x H): 795 x 795 mm Screw diameter: 60 mm Machine is in operation, delivery by arrangement Location: Budapest, Hungary Price: 15,000 EUR For more details and photos, please contact us. Injection Moulds for Sale: - Planter pot 14 cm, 16 cm, 25 cm + base + hanger (7 moulds): 2,000 EUR - Chain planter pot 20 cm (4 moulds): 2,000 EUR - Flower pot with ribs (1 mould): 200 EUR - Hose connector (2 moulds) - Towel holder (3 moulds): 2,000 EUR - Toy bucket + handle + shovel + rake: 1,000 EUR - Corner shelf (2 moulds): 4,000 EUR Writing Tools Set: 1. 10 cm ruler, 4 embossing dies (1 mould) 2. 16 cm ruler, 4 embossing dies (1 mould) 3. 20 cm ruler, 2 embossing dies (1 mould) 4. 30 cm ruler, 2 embossing dies (2 moulds) 5. 40 cm ruler, 2 embossing dies (1 mould) Hsdpjxd U Tqsfx Afijnu 6. 50 cm ruler, 2 embossing dies (1 mould) 7. Protractor – Standard protractor (1 mould) 8. Mini protractor, 45° & 60°, 10 cm (1 mould) 9. Protractor, 45° (2 moulds) 10. Protractor, 60° (2 moulds) 11. Angle gauge, 180°, 2 embossing dies (1 mould) 12. Angle gauge, 360° (1 mould) 13. Stamping machine for 300-size stamps (1 mould) 14. Stamp illuminator, new, for 300-size 15. Stamp pads (for rulers) Total: 15 moulds + stamping equipment: 5,000 EUR

Condition: good (used), functionality: fully functional, machine/vehicle number: 090258095, MONO VS2 BREAD PLANT WITH DIVIDER AND COMBINATION MOULDER. It can divide dough pieces from 250 grams up to a maximum of 1000–1200 grams, and the divided pieces pass through the moulding machine, giving the option for pan-shaped loaves or baguette-style bread. The plant is fully operational. The divider measures 280 cm in length (including the conveyor console) x 103 cm width x 182 cm height. The moulding machine measures 160 cm length x 130 cm width x 180 cm height. MACHINE – Ex Bakery Mono VS2 Plant Moulder Section ELECTRICAL SPEC – 3PH 415V, 0.55kW 0.7amp APPROX MEASUREMENTS – 1800mm H x 2015mm W x 1600mm L APPROX WEIGHT – 250kg MACHINE – Ex Bakery Mono VS2 Plant Divider Section ELECTRICAL SPEC – 3PH 415V, 0.78kW 1amp Hjdpfx Aowxlq Ssfienu APPROX MEASUREMENTS – 1800mm H x 1030mm W x 3000mm L APPROX WEIGHT – 500kg

Year of construction: 2020, condition: ready for operation (used), General Data Hsdpfx Afjxb E I Toijnu Machine weight 28400 kg Additional Equipment The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2015, Ref. no.: 18589 Hersteller: NETSTAL Type: Elion 1750-510 M Electric machines Year of construction: 2015 Clamping unit Clamping force: 175 ton Opening stroke: 450 mm Distance between tie bars: 560 x 560 mm Hjdpexdxpcofx Afienu Mould height min.: 500 mm Mould height max.: 800 mm Platen size (h x v): 830 x 845 mm Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight: 193 g Injection pressure: 2400 bar Measurements and weight Dimensions: 7,1x2,2x2,0 m Machine weight: 12750 kg

Condition: used, Year of construction: 2005, Overview  This blow moulder was manufactured in 2005 by German company Krones. The machine has been regularly serviced, overhauled in 2022, equipped with a new control system in 2024, and had its oven chain replaced in 2025. It is currently set to run at approx. 13,000 bph, limited by the filler, but its capacity can be increased up to 19,000 bph. The machine is available with preform feeding system, cooling unit, and spare parts. Technical data  Capacity: up to 19,000 bph (currently running at ~13,000 bph) Formats: 0.2L, 0.5L, 1.0L, 1.5L PET bottles Neck finish: 1881 Scope of Delivery  Blow Moulder | Krones | Contiform S12 | 2005 Preform feeding system (silo, elevator, sorter, chute by Tanner) Cooling unit Set of spare parts Hjdpfx Afoxbubpeienu

Condition: new, Year of construction: 2024, We offer subject to prior sales: Hnedpfsllvyrsx Afiou -4- pieces blow bars , model HAZ 790, high chrome, each approx. 107 kg, directly available, subject to prior sales.

Condition: used, Year of construction: 1992, Used Blow Molding Machine Sidel 1992 Manufacturer: SIDEL Model: SBO2 Year: 1992 Hnjdpfovgunwex Afieu Speed (b / h): 3000 Processed formats: 0.25ml – 2 liter Accident prevention protections: Yes Manuals available: Yes Revisions available: Yes Operating status: In production Number of cavities: 2 Preform neck type: Preform 1881 weight: 9000kg Quick format change: Yes Preform loader: Yes Preform orientator: Yes Compressor: No Chiller: No Air recovery system: No PLC type: Mitsubishi Spare parts available: Yes Hours worked: 2000 Consumption: Volt:360 Kw:40 Hz:100 Notes: Machine working stabile suitable to be connect with filler machine. The machine has been completely updated, hmi electronics and new plc.

Condition: good (used), Year of construction: 2009, Ref. no.: 18585 Hersteller: ARBURG Type: 370 A 500-170 Electric machines Year of construction: 2009 Clamping unit Hnedpfx Afjxdxn Sjieu Clamping force: 50 ton Opening stroke: 300 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 510 x510 mm Injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,9 x 2,0 x 1,5 m Machine weight: 3470 kg

Condition: used, Year of construction: 2001, Used Blow Molding Machine Sipa 8/4 3500 BPH This blow molding machine was manufactured in 2001 by SIPA and is the 8/4 linear type with 4 cavities. It reaches a speed of 3500 BPH and has two neck types including corvaglia and 29/21 neck. The machine has all its user manuals and its safeguards. It is in operation for one shift for only 6 months per year. It is currently in production, and was regularly maintained. Its bottles sizes are 1.5 L and 1 L for oil. Has pressure oil neck equipment. Has a total of 5 molds. Neither the compressor nor the chiller is included. Hjdpfxevguqfe Afienu This linear blow molding machine is kept in working condition and is ready for sale.

Condition: good (used), Year of construction: 2007, Ref. no.: 18579 Hersteller: ARBURG Type: 270 C 400 - 70 GOLDEN EDITION Year of construction: 2007 Clamping unit Clamping force: 40 ton Opening stroke: 200 mm Distance between tie bars: 270 x 270 mm Opening width: 550 mm Platen size (h x v): 446 x 446 mm Injection unit Screw diameter: 22 mm Injection volume: 34 cm³ Shot weight: 31 g Injection pressure: 2000 bar Hnsdpfx Afsxdxn Ejiou Measurements and weight Dimensions: 3,2 X 1,5 X 1,9 m Machine weight: 2150 kg Robot Producer: Wittmann Type: W711

Condition: used, Year of construction: 2002, Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE Hnodpfsvgvqgox Afiju The HDPE Blow Molding Machine TECHNE  produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency and Production Cycle The HDPE Blow Molding Machine TECHNE achives a nominal production rate of 1690 bottles per hour (bph). The production cycle time is approximately 16 seconds. Consequently, this machine produces 40,560 bottles daily and 13,141,440 bottles annually, based on 324 working days per year. Therefore, the Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph suits large-scale operations perfectly. Detailed Technical Specifications The machine consists of a single station with extruders of diameters 70 mm/25D, 80 mm/25D, and 60 mm/25D, providing a total output capacity of approximately 320 kg/h. Moreover, DC motors drive the extruders, offering respective power ratings of 33 kW, 41 kW, and 24 kW. The total installed power of the machine is 240 kWh, with an average consumption of 80 kWh. Additionally, the mold’s clamping force is 300 KN, ensuring precise and uniform mold closure. Controls and Cutting System of the HDPE Blow Molding Machine TECHNE The control panel allows you to configure and monitor process parameters, including alarm systems. In addition, the machine uses a cold blade parison cutting system and a pneumatic system for bottle pick-and-place. Multiple cylinders control the parison thickness in a closed-loop position cycle, allowing for independent control of the parison profile for each cavity. Post-Overhaul Performance In 2013, technicians overhauled the machine, installing a new B&R PLC to enhance performance and reliability. The mold closing mechanism uses levers and hydraulic actuators, strategically positioned to ensure perfect distribution of clamping force. Similarly, upper and lower deflashing occurs through a single pneumatic actuator. Conclusion of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE efficiently produces high-quality HDPE containers. Its technical specifications and advanced technologies make it an excellent choice for companies requiring high production capacities and long-term reliability.

Condition: good (used), Year of construction: 2013, Ref. no.: 18577 Hersteller: ARBURG Type: 520 A 1300 - 400 ALL DRIVE Electric machines Year of construction: 2013 Clamping unit Clamping force: 130 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 115 g Injection pressure: 2500 bar Measurements and weight Dimensions: 5,8 x 1,7 x 2,3 m Machine weight: 7100 kg Hedpfx Aexdxnxofionu

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Hodpfevv E Hisx Afisnu Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation The blow molding machine includes technical manuals and safety protections.

Condition: good (used), Year of construction: 2010, Ref. no.: 18574 Hersteller: ARBURG Type: 520 H 1500-800 Year of construction: 2010 Clamping unit Clamping force: 150 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Hedpexdxnrofx Afisnu Injection volume: 315 cm³ Shot weight: 291 g Injection pressure: 2470 bar Measurements and weight Dimensions: 5,1 x 1,7 x 2,3 m Machine weight: 7900 kg Additional information & extras Accumulator: 1 pcs Robot Producer: Arburg Type: Multilift

Condition: used, Year of construction: 2003, operating hours: 19,500 h, Used Blow Molding Machine Sidel SBO 2003 We have a Used Blow Molding Machine available for purchase, the Sidel SBO 2003, with the reference. The machine was manufactured by Sidel in 2003 and has a model of SBO 12. It has a speed of 17000 BPH and is suitable for creating PET containers. This particular machine has 12 cavities and comes equipped with a preform loader, preform tipper, and preform unscrambler. It also has an air recovery system and is a rotary type. The preform neck types it supports are 1881 and 2925 neck. The machine is currently in a ready state for operation and has safety features installed. It also comes with manuals and has been in operation for 19500 machine hours. Hodpfxevr S Tns Afienu If you’re interested in purchasing this machine, please let us know.

Condition: good (used), Year of construction: 2001, Ref. no.: 18404 Hersteller: ARBURG Type: 420C-1300-350 Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Hnjdpfx Afswm I A Tsieu Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Machine weight: 4080 kg Additional information & extras Core pull: 1 pcs

Condition: used, Year of construction: 2008, Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let’s explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Rotary Blow Molding Machine 2008 is manufactured by Sipa, a reputable company known for its innovative solutions in the packaging industry. This machine, specifically the SFR8 model, was introduced in 2008 and has gained recognition for its exceptional performance. 3. Features and Specifications The Used revised Sipa Rotary Blow Molding SFR8 comes with a range of features and specifications that make it stand out in the market: Year: 2008 Manufacturer: Sipa Model: SFR8 Speed: 12000 BPH (Bottles Per Hour) Containers: PET (Polyethylene Terephthalate) Formats: 0.50 L Additional details of the machine include: No. of cavities: 8 Preform loader: Yes Preforms tipper: Yes Preforms unscrambler: Yes Compressor: Not stated Chiller: No Preform neck type: 1810 Air recovery system: Yes Type: Rotary 4. Benefits of the Used revised Sipa Rotary Blow Molding SFR8 Investing in the Used revised Sipa Rotary Blow Molding offers several advantages: Hsdpfx Aevgufisfijnu Efficiency: With a speed of 12000 BPH, the machine ensures high productivity and optimized production cycles. Precision: The SFR8 provides precise molding capabilities, resulting in consistent and high-quality bottles. Versatility: It accommodates PET containers and supports the format of 0.50 L, making it suitable for various industries and applications. Reliability: Sipa is known for its durable and reliable machines, minimizing downtime and maintenance costs. Innovative Features: The machine incorporates advanced features such as preform loaders, tippers, unscramblers, and an air recovery system for enhanced efficiency.

Condition: used, Year of construction: 2004, Used PET Blower Siapi 2004 type EASP 20 – Italy This is a complete blow molding machine which was not in use for the last 3 years. Blower speed: 2.500 bph for 2 L bottles The machine has 2 cavities, for neck sizes 28-38 mm. This Siapi Blower can be tested with a dry run. Weight: blower 5.000 kg, elevator 250 kg, positioner 250 kg All the necessary technical documentation for this machine is available. Required installed power: 120 kW Is available this compressor unit with additional offer: Compressor: Tempo Tehnika 350, 2004 Specs: 1100 rpm, 75 kW, 42 bar Hodpfxevgutaj Afionu Dehumidifier: Bode du 37 type 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA rwd 150 – 2004 Machine cooler: Euri chiller gc – 2004 The compressor is included in this PET blow molding machine, or it can be bought separately. Is available this compressor unit with additional offer: Air transport cca 100m – Europool, Italy For bottles with a neck 28 and 38 mm. This blow molding machine complete with compressor and air conveyors is in excellent condition.