Used Blow Moulding for sale (2,610)

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Dsdpfx Ahjwm Iy Ee Ijkn Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. Dksdjyiz U Tepfx Ah Ijn The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Dkjdju Awalepfx Ah Ien Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate Dkjdpfev Stbmex Ah Ien - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. Dodstpf N Uopfx Ah Ijkn - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: used, Year of construction: 2012, operating hours: 56,500 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 2,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request Dkedpfx Ahsy N Ecce Isn terms of payment: 100% prior to delivery

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use Dedpfx Ahjcuwptj Ijkn the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2008, operating hours: 73,000 h, clamping force: 70 kN, displacement volume: 49 cm³, injection pressure: 2,500 bar, overall weight: 3,500 kg, screw conveyor diameter: 253,035 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Djdpey Ntmiofx Ah Iekn

Condition: used, Year of construction: 2008, operating hours: 73,000 h, clamping force: 70 kN, displacement volume: 49 cm³, injection pressure: 2,500 bar, overall weight: 3,500 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Djdpfx Ahjy Ntmcj Iskn

Condition: used, Year of construction: 2010, operating hours: 55,000 h, clamping force: 110 kN, displacement volume: 113 cm³, injection pressure: 2,543 bar, overall weight: 7,200 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz Djdpoy Ntl Sjfx Ah Iokn delivery time: on request terms of payment: 100% prior to delivery

Condition: used, machine/vehicle number: 007243, Max. machinable height: 120 mm Maximum machinable width: 230 mm Dedpoy Nkpbefx Ah Ijkn Max. forward feed speed: 12 m/min Operator shafts number: 4

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times Dedpfx Asw Hc Spjh Ijkn • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Year of construction: 2003, condition: excellent (used), Blow extrusion. Center distance: 160 mm. Extruder E-80/F. Screw diameter: 80 mm. Screw length: 22D. Screw speed: 60 rpm. Extruder motor power: 40 HP (30 kW). Heating power: 18.4 kW. Cooling zones: 3. Heating zones: 3. PE plasticizing capacity: 90 kg/h. Cooling power: 2.25 kW. Extruder motor fan power: 0.75 kW. Blow molding unit: blowing capacity: 5 L. Clamping force: 15 t. Dry cycles: 12. Maximum platen opening: 475 mm. Minimum mold thickness: 250 mm. Maximum mold width: 340 mm. Maximum mold height: 410 mm. Bottle cooling fan power: 0.33 kW. Die head L3-1RFH. Maximum die diameter: 40 mm. Minimum die diameter: 10 mm. Heating power: 4.5 kW. Hydraulic unit: oil capacity: 120 L. Maximum hydraulic pressure: 140 kg/cm². Motor power: 18 kW. Pneumatic pressure: 8–10 kg/cm². Air consumption: 800 L/min. Water consumption: 1.5 m³/h. Total installed power required: 74.23 kW. Dodpjyidzyofx Ah Iskn

Year of construction: 2003, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, mold installation height: 190-660mm, clear distance between the tie bars: 540x540mm, max. mold installation height: 378x378mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Dodpfx Asy Snckoh Ijkn

Year of construction: 1999, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Dkjdpfey Sncqsx Ah Ion

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Dkodpowm Iz Nofx Ah Ijn Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: used, Year of construction: 2004, Used PET Blower Siapi 2004 type EASP 20 – Italy This is a complete blow molding machine which was not in use for the last 3 years. Blower speed: 2.500 bph for 2 L bottles The machine has 2 cavities, for neck sizes 28-38 mm. Dkjdpfjvgutasx Ah Isn This Siapi Blower can be tested with a dry run. Weight: blower 5.000 kg, elevator 250 kg, positioner 250 kg All the necessary technical documentation for this machine is available. Required installed power: 120 kW Is available this compressor unit with additional offer: Compressor: Tempo Tehnika 350, 2004 Specs: 1100 rpm, 75 kW, 42 bar Dehumidifier: Bode du 37 type 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA rwd 150 – 2004 Machine cooler: Euri chiller gc – 2004 The compressor is included in this PET blow molding machine, or it can be bought separately. Is available this compressor unit with additional offer: Air transport cca 100m – Europool, Italy For bottles with a neck 28 and 38 mm. This blow molding machine complete with compressor and air conveyors is in excellent condition.

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Dkodpfovgu D Sox Ah Ien Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2003, operating hours: 34,000 h, Used Blow Molding Machine Kosme 2003 Djdpfsvgundex Ah Iokn No. of cavities 4 Preform loader YES Preforms tipper YES Preforms unscrambler NO Compressor NO Air Recovery System NO Type KSB 4 year 2003 Linear or Rotary LINEAR Capacity: 2,0 l 3000 bph 1,5l 3500 bph 1,0 4000 bph 0,33-0,5l 4500 bph In working condition Without molds Available midle of august 2022 neck 1881 and 1810 have manuals available

Condition: used, Year of construction: 2008, Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let’s explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Rotary Blow Molding Machine 2008 is manufactured by Sipa, a reputable company known for its innovative solutions in the packaging industry. This machine, specifically the SFR8 model, was introduced in 2008 and has gained recognition for its exceptional performance. 3. Features and Specifications The Used revised Sipa Rotary Blow Molding SFR8 comes with a range of features and specifications that make it stand out in the market: Year: 2008 Manufacturer: Sipa Model: SFR8 Speed: 12000 BPH (Bottles Per Hour) Containers: PET (Polyethylene Terephthalate) Formats: 0.50 L Additional details of the machine include: No. of cavities: 8 Preform loader: Yes Preforms tipper: Yes Preforms unscrambler: Yes Compressor: Not stated Chiller: No Preform neck type: 1810 Air recovery system: Yes Type: Rotary 4. Benefits of the Used revised Sipa Rotary Blow Molding SFR8 Djdovgufiopfx Ah Ijkn Investing in the Used revised Sipa Rotary Blow Molding offers several advantages: Efficiency: With a speed of 12000 BPH, the machine ensures high productivity and optimized production cycles. Precision: The SFR8 provides precise molding capabilities, resulting in consistent and high-quality bottles. Versatility: It accommodates PET containers and supports the format of 0.50 L, making it suitable for various industries and applications. Reliability: Sipa is known for its durable and reliable machines, minimizing downtime and maintenance costs. Innovative Features: The machine incorporates advanced features such as preform loaders, tippers, unscramblers, and an air recovery system for enhanced efficiency.

Condition: used, Year of construction: 2002, Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE  produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency and Production Cycle The HDPE Blow Molding Machine TECHNE achives a nominal production rate of 1690 bottles per hour (bph). The production cycle time is approximately 16 seconds. Consequently, this machine produces 40,560 bottles daily and 13,141,440 bottles annually, based on 324 working days per year. Therefore, the Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph suits large-scale operations perfectly. Detailed Technical Specifications Djdpjvgvqgefx Ah Iokn The machine consists of a single station with extruders of diameters 70 mm/25D, 80 mm/25D, and 60 mm/25D, providing a total output capacity of approximately 320 kg/h. Moreover, DC motors drive the extruders, offering respective power ratings of 33 kW, 41 kW, and 24 kW. The total installed power of the machine is 240 kWh, with an average consumption of 80 kWh. Additionally, the mold’s clamping force is 300 KN, ensuring precise and uniform mold closure. Controls and Cutting System of the HDPE Blow Molding Machine TECHNE The control panel allows you to configure and monitor process parameters, including alarm systems. In addition, the machine uses a cold blade parison cutting system and a pneumatic system for bottle pick-and-place. Multiple cylinders control the parison thickness in a closed-loop position cycle, allowing for independent control of the parison profile for each cavity. Post-Overhaul Performance In 2013, technicians overhauled the machine, installing a new B&R PLC to enhance performance and reliability. The mold closing mechanism uses levers and hydraulic actuators, strategically positioned to ensure perfect distribution of clamping force. Similarly, upper and lower deflashing occurs through a single pneumatic actuator. Conclusion of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE efficiently produces high-quality HDPE containers. Its technical specifications and advanced technologies make it an excellent choice for companies requiring high production capacities and long-term reliability.

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph This HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). This machine handles bottle formats up to 2 liters and produces up to 2700 bottles per hour (bph). Moreover, the system uses a 4+4 configuration, meaning four upper and four lower cavities, which optimize production with a symmetrical and highly efficient design. You can access this machine starting mid-October. Main Technical Features of the HDPE Blow Molding Machine TECHNE SYSTEM To ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. Mold Configuration and Flexibility Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specific production needs. Upon request, you can also add accessories or make necessary modifications, which we offer at separate quotations. Additionally, our technicians, who manage the disassembly, can reassemble the machine, thereby ensuring continuity and reliability in operations. Manuals and Technical Documentation This blow molding machine comes with complete technical manuals and detailed schematics, which will assist you during installation, maintenance, and daily operations. More specifically, the documentation provides detailed specifications regarding container tolerances and operational schematics of system components. As a result, the design optimizes critical values like bottle spacing and the distance between extruders and the container body. Production and Performance Dedpfx Ahjvgvkas Iokn This Used Blow Molding Machine supports production capacities ranging from 2400 to 2700 bottles per hour, depending on operating conditions and container types. Therefore, it allows you to maintain a steady output rate. In terms of precision, the mold-carriage stroke extends to 660 mm, allowing well-calibrated movements that ensure production uniformity. Consequently, the machine can produce bottles up to 290 mm wide and 690 mm tall. Conclusions of the HDPE Blow Molding Machine TECHNE SYSTEM The Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph, available from mid-October, provides a versatile and highly efficient solution for companies that require a high production capacity. Additionally, you can customize the system by adding accessories upon request. As a result, the flexibility in mold configuration allows you to adapt the machine to a wide range of production demands. Lastly, the machine ensures operational efficiency due to its reliability, and the availability of technical support for both assembly and disassembly further enhances its performance.

Condition: used, Year of construction: 2007, Used Blow Molding Machine Sipa SFR 16 Dkodpfx Ajvgvtush Ijn Assessment of Heating System and Preform Feeding Firstly, a comprehensive evaluation of the entire oven system is imperative, encompassing turning-over ramps and tension wheel guides, to ensure an efficient and seamless bottle forming process. Evaluation of Transfer Arms and Cams of the Sipa blower An indispensable aspect pertains to the scrutiny of transfer arms and cams. These components play a pivotal role in maintaining a continuous and uninterrupted production flow. Furthermore, meticulous inspection of their functionality is essential to uphold the quality and precision of the blow molding process. Condition of Molds and Stretching Mechanism Equal emphasis is placed on assessing the condition of molds and the stretching mechanism. The accuracy and integrity of the molds are pivotal in producing flawless, high-quality bottles. Consequently, conducting a thorough assessment of these components is essential to ensure optimal machinery operation. Examination of Water and Air Circuits in the Sipa blower Subsequently, the integrity of water and air circuits, integral components for preform cooling and pressure control during the blow molding process, is scrutinized. Ensuring proper circulation of water and air is crucial for maintaining stable working conditions and guaranteeing the quality of the final product. Technical Specifications and Additional Details In terms of technical specifications, pertinent details are provided regarding available SKUs and the weight of PET preforms per SKU. Specifically, for 0.5 L, the weight is 14 g, for 1.0 L, it is 26 g, for 1.5 L, it remains at 26 g, and for 2.0 L, it ranges from 29-31 g. It is important to note that the existing molds of the Sipa blower will not be supplied with the machine; replacement is at the discretion of the buyer. Additionally, the preform neck is specified as Corvaglia 28. Further technical details include the identification of the electrical cabinet and Command panel PLC of the Sipa blower as Siemens S7, along with the total number of cavities, which amounts to 16. Main observations on blowing machine Oven and the Preform in-feed Condition of the Following:  Oven, Turning-over ramps _ guiding and tension wheel  Heating modules, Oven ventilation and Cooling shields  Transfer arms and Cams  Moulds and Stretching mechanism  Water and Air Circuits All these are in great conditions  Number of SKUs and PET preform weight per SKU 0,5 L: 14 g 1,0 L: 26 g 1,5 L: 26 g 2,0 L: 29-31 g The existing molds will be supplied along with the machine. Current bottle drawings can be supplied as well. You will replace them if you want something different. Preform Neck Alaska 3-start Electrical cabinet and Command panel PLC: Siemens S7, great overall condition

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 40 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, power: 18.5 kW (25.15 HP), Equipment: documentation/manual, In perfect shape. Dkedpewlhb Tofx Ah Ion

Condition: used, functionality: fully functional, We are offering for sale a complete set for the production and handling of volumetric concrete precast units. The set includes: Djdpfx Asy R Uuweh Ijkn 1) Used functional steel mould Mould dimensions: length 4,500 mm; width 3,000 mm; height 3,000 mm. The mould allows for the production of precast units with wall thickness up to 100 mm. 2) Nearly new steel tilting frame for subsequent handling and assembly of the finished product Load capacity: 7 t. The set is suitable for the manufacture of: - Utility buildings - Small residential units - Wall panels and similar precast elements. Asking price: 18,000 EUR (net, negotiable) If interested, please do not hesitate to contact us.