Prepress cheese vat and moulding station

Tetra Pak Tebel Prepress VAT 12000l

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm Gbodpfx Agsrtd Uwsbjg - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Gbjdpjnpbhvofx Agbeg

Condition: reconditioned (used), Year of construction: 2003, up to 50.000 liter per hour Already reconditioned Milk / whey skimmer, self cleaning. Designed for warm milk or whey skimming, with soft stream inlet. Including bowl, motor, motor cover, base frame, pressure transmitter and pneumatic counter pressure valve on skim side, Flowtransmitter and automatic flow regulation valve for cream, manouvering water valves. Motor 55,0 KW - 92,0 A - 1.791 rpm - 60 Hz. Belt drive. Set of tools with ring key and pressing tool. New controls can be offered as option Godpfx Aswrqfnsgbjbg

Condition: used, Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Gjdpfx Agohwtptsbjbg Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Gbsdsur Hfzepfx Agbog Fanuc 310is controller

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with Gjdjul Efmjpfx Agbebg tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: as good as new (ex-display), Centrifugal pump Alfa-Laval FM-1A Material: stainless steel, medium: fruit Godpfx Agohryyhobjbg concentrate/fruit juice, flow rate 20.000 l/h, delivery head approx. 25m, power approx. 3 kW, speed approx. 2.900 1/min, inlet/outlet DN50 1 VA-tank, vertical, cylindrical, closed 1 VA-subframe for pump and tank

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Gbodpfx Agjh Eulgsbsg

Condition: good (used), Item: A-2819-Landteknik Cheese vat 12T Cheese vat Landteknik Complete Stainless Steel, Agitator inside, Whey filter. Capacity 12.000L. Gbedpfxeh D H Urj Agbog We can offer two pieces/identical

Condition: used, Year of construction: 2019, Used flash pasteurizer FH4000 2000L-h The Used flash pasteurizer FH4000 2000L-h, produced in 2019 by UDMACHINES, represents an advanced heat treatment system used mainly in the bottling industry. Main features: The Used flash pasteurizer FH4000, with an operating capacity of 2000L per hour, has been designed to guarantee optimal performance and reliability over time. The ability to reach temperatures of 95°C in a four-stage system is particularly impressive, especially considering the -1 L/h water consumption reduction feature. The overall weight of 2000 kg is a testament to the robustness and durability of the machine, while the integrated safety features ensure safe and regulatory-compliant use. Technical details: 1) Pasteurizer 1800-2000 lt/h, equipped with control panel, automatic cleaning, alarm detection for unpasteurized product, electronic data system, suitable for egg production. The temperatures of the pasteurizer can be managed from the control panel, depending on the temperature you would like to put. So, the temperatures that you have already sent me as below: egg white, 55 celsius-57 Celsius, 1-3 minutes egg yolk,58 Celsius -63 Celsius, 2.5-4 minutes whole egg liquid 58 Celsius- 64.4 Celsius , 2,5-5 minutes Can be controlled as it is convenient for you. 2) Separator connected with the pasteurizer. You have the possibility to use them together or separately. It has control panel and all the spare parts. 3) Homogenizer connected with the pasteurizer. You have the possibility to use them together or separately. It has control panel and all the spare parts. 4) Degaser connected with the pasteurizer. It is for cleaning the product from the smells. It has control panel and all the spare parts Gsdjvgucnspfx Agbjbg 5) Chiller connected to the pasteurizer You have the possibility to use them together or separately. It has control panel. Transport and Positioning: The transport and positioning of the Used flash pasteurizer FH4000 2000L-h is crucial. Although nylon packaging is the standard solution, the possibility of requesting packaging in a wooden crate offers further protection during the shipping and handling phases. The delicate nature of some components requires care when lifting and positioning. Particular care should be given to the adjustment feet, electrical connections, and piping, to avoid potential damage. The optimal placement of the pasteurizer in a workspace also involves consideration of the brightness of the area, guaranteeing safe and efficient working conditions for operators. Leveling and Alignment: Correct installation of the Used flash pasteurizer FH4000 2000L-h requires careful leveling. This not only ensures optimal performance of the device but also prevents irregular wear or potential mechanical problems. By using a spirit level, you can ensure that the machine is perfectly horizontal.