Used Blow Molding Machine for sale (65,246)

Condition: excellent (used), Year of construction: 2024, ENGEL DUO 36060/2700 TECH INJECTION MOLDING MACHINE Year of manufacture: 2024 Clamping force: 27,000 kN (2700 tons) Robot: ENGEL VIPER 90 CLAMPING UNIT Clamping force: 27,000 kN Mold opening stroke: 3300 mm Maximum mold opening distance: 4100 mm Minimum mold height: 800 mm Maximum mold height: 2200 mm Column spacing (H × V): 2180 × 1750 mm Platen dimensions (H × V): 2970 × 2640 mm Opening force: 770 kN Opening force with hydraulic cushion: 1600 kN Dry cycle time (EUROMAP 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Injection volume: 24,100 cm³ Theoretical injection weight (PS): approx. 21.9 kg Injection rate: 2620 cm³/s Injection pressure (regenerative mode): 1300 bar Maximum injection pressure: 1600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Torque at maximum speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s INJECTION NOZZLE Nozzle stroke: 1300 mm Nozzle closing force: 210 kN EJECTION SYSTEM Ejector stroke: 400 mm Ejector forward force: 420 kN Ejector return force: 420 kN HEATING SYSTEM Number of heating zones (including nozzle): 12 Installed heating power: 160.9 kW DRIVE AND HYDRAULIC SYSTEM Installed motor power: 355 kW Motor power for charging pump: 3 kW Hydraulic oil tank capacity: 3500 l COOLING SYSTEM Required cooling capacity: 66.9 kW Water consumption (supply temperature 32°C): 5.88 m³/h ADDITIONAL EQUIPMENT Linear robot: ENGEL VIPER 90 Movable / pull-out guide column Hot runner control: 160 zones Gedpfxjz N Et Ds Angeuh Hydraulic core control: 3 + 3 Cascade control: 72 channels

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 530 mm, displacement volume: 159 cm³, injection pressure: 2,000 bar, injection weight: 146 g, mold height (min.): 175 mm, ejector force: 40 N, ejector stroke: 125 mm, plate width: 775 mm, plate height: 775 mm, total length: 5,450 mm, total width: 1,550 mm, total height: 1,950 mm, overall weight: 5,850 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF160 IU320 D=35 Fully electric SGM – ejector, nozzle system, core pulls are servo-hydraulic Clamping force 160T Tie bar spacing 530x530 Tool installation height 175 to 620 Gujdpfx Aszz Sp Rengjh Robot interfaces Euromap 18 and Euromap 67 Warranty can optionally be extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: CE standard Hybrid machine Maximum tool height increased by 100 mm Bimetal screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 2 additional hydraulic core pulls with end switch monitoring 2 air blow-off units, permanently mounted on the fixed platen Dosing signal interface with HAN-3A connector, plus 1 additional 220 V / 10 A Schuko socket 20 mA interface for mold temperature controller 1 set of 4 × 2 water manifolds on the back of each platen with 3/8" connection 2 sets of water manifolds, each with 4 lines Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable inputs/outputs Centering rings on both platens according to Euromap 18/67

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Gsdpfsywx Hqox Angjuh Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine Guedpfoz Dquzex Angjh 80 tons Year 2002

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Guedpfx Anez Nkavjgoh Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Gujdpfxjz Ipm Rj Angeh Price: Upon request

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Godpszcx Tmefx Angjuh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm Gsdpfxjuiq Dhj Angsuh This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Godpfx Ajzqglrengouh Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: like new (used), Year of construction: 2010, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here we offer the following well-maintained used injection molding machine as part of our injection molding machine sales. We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesale supplier of used injection molding machines for over 25 years. Due to current circumstances - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year of manufacture: 2008 / Delivered by KraussMaffei in 2010, as the original customer cancelled. Machine No.: 61011790 Operating hours: 24,600 h Injection unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Gsdpoz A Iarofx Angouh Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen spacing: 950 mm Minimum mold height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Machine shoes -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control optionally stroke/time or time/time. Quantity adjustable manually via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector bay protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the fixed platen (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in series -Chrome-plated tie bars in the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control, 1-fold, on the operator side. -Water manifold, 8-fold -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller of accuracy class 0.5. -Ejection of the cooled nozzle insert -Fan, control cabinet -Mains voltage supply: TN-C or TN-C-S or TN-S system (three-phase networks with separately routed neutral conductor or neutral conductor routed together with earth) -1 service socket, single-phase 10 A, in the control cabinet, connected before the main switch in country-specific design. -Signal interface according to EUROMAP 67 with reject signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of delivery. Free loading ex our warehouse in Hanover - worldwide delivery possible upon request. Inspection under power possible by appointment.

Condition: used, Year of construction: 2005, operating hours: 61,407 h, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from Arburg, model 470 C 1600-800. The pump and one circuit board have been removed from the machine; therefore, the machine is being sold as defective. Otherwise, it is in very good condition. Technical specifications: Pump operating hours: 61,400 Clamping force: 1600 kN Distance between tie bars: 470 x 470 Ejection stroke: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335 x 1635 x 1950 mm Weight: 6950 kg The machine is offered without any peripherals. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES, AND MORE. Guodpfx Aoz Etu Hengoh Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Gjdpfxjx Uqb Is Angsuh Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Godozhudkopfx Angouh

Condition: excellent (used), Year of construction: 1999, operating hours: 48,400 h, 1 unit of used blow molding machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of manufacture: 1999 Clamping force: 120 tons Guedpfxoynutme Angeh Extruder type: 120/24 WT Accumulator head: BFKS25, equivalent to approx. 17.75 kg The machine can produce containers up to a size of 200 liters. A tool for a 120-liter container with a press-ring closure is available for the machine. Video available!

Condition: used, Year of construction: 2012, machine number type model year clamping force distance between opening stroke screw shot volume tie bars diameter ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive Godpfxezykzie Angeuh 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 2494 E-screwdrive 14 5500-5600 SXN 2000 550 830x830 850 98 3394 Hydraulic motor 15 5500-5650R 2K S+ 2009 550 830x830 850 84 1247 E-screwdrive 16 5500-5650R 2K S+ 2011 550 830x830 850 84 1247 E-screwdrive 17 6600-8650R S+ 2008 660 900x900 940 98 1886 E-screwdrive 18 6600EP-8650 S+ 2009 660 1000x1000 1200 115 5349 E-screwdrive 19 6600-8650R S+ 2010 660 900x900 940 98 1886 E-screwdrive 20 12000-19000 SXN 2003 1200 1200x1200 1500 150 12193 Hydraulic motor

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. Gjdpfxexqhuue Angouh - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off Godezzn Hlepfx Angouh · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Gedjzd U Dijpfx Angsuh

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. In excellent condition! Guedpfxjzrvhlo Angjh Price for both machines: only €14,000.

Condition: used, Year of construction: 2010, Injection moulding machine Arburg 370H 600-290, year 2010, incl. Wittmann picker Gujdpjy R Tg Eofx Angeh Injection moulding machine Arburg 470C 1500-400, year 2006, incl. Wittmann handling

Condition: used, Year of construction: 2005, operating hours: 130,948 h, functionality: fully functional, machine/vehicle number: 155136, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production cycle. Gjdpfxsz Enu Ij Angouh Regularly serviced and maintained. This machine is ideally suited for the production of plastic components. It is a robust design from a reputable manufacturer, ensuring reliable and precise operation. The machine can be inspected by prior arrangement. Technical documentation is available. Assistance with organizing loading is provided.

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Guedpfx Asz H Rc Dongeh

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface 6x cascade 1x valve connector Godpfxszz Smcj Angjuh 2x 16A sockets 1x 25A socket

Condition: good (used), Year of construction: 1996, operating hours: 32,750 h, functionality: fully functional, machine/vehicle number: 266568, clamping force: 750 kN, screw diameter: 3,025 mm, displacement volume: 8,549 cm³, full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) Godpfx Anecud Nhsgeuh injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 3,300 kg, We are offering this used Engel ES 200/45 HL-V injection molding machine, manufactured in 1999, for sale. Gedpfxsz I Uugj Angsuh Serial number: 38717 Year of manufacture: 1999 Weight: 3300 kg Type: ES 200/45 HL-V If you have any questions or require further information, please feel free to send us a message or call us.