Used Blister Machine for sale (64,714)

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Sold as seen Nsdpfx Ajv S Eurehvjkw

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. Nksdpfx Aheyuc Hzjvow All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Nksdpfxjpfcd Aj Ahvew Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)

Condition: ready for operation (used), Year of construction: 1989, operating hours: 38,907 h, functionality: fully functional, machine/vehicle number: 256, type of input current: three-phase, For sale: ILLIG HSA 50 RD blister machine, manufactured in 1989. This is a high-performance through-feed blister sealing machine with a carton feeder, film thickness: 150µm-600µm. The line is sold including a thermoforming station (currently disconnected as we have not used it). Speed: 5-18 cycles/min. For reference, lipstick blistering output is approximately 16,000 packs/8 hours. Dimensions (without forming station): 465x115 cm + 68 cm unloading station (currently dismantled). Maximum sealing area per tray: 50x30 cm. Maximum tray size: 57x35 cm. The machine is 100% fully operational and in continuous production. Inspection prior to purchase possible. POLAND. Nkodpoywhxcsfx Ahvjw

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Available from Q1 2026 Technical data Blister module (B 1770) Max. output 700 blisters/min Application area: solid products Max. format range [feed x width] 200 x 284 mm Cartoning module (C 2305/C 2504) Max. output 300 or 500 folding boxes/min. Application area: blisters Max. folding box size [A x W x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm For details, see PDF Nedpfx Ajv D Ipishvjkw

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Nsdpfx Ahjif Elgevekw

Condition: ready for operation (used), Year of construction: 2000, A Uhlmann blister machine including new Scanware for fill-good inspection Spectra CL is available. Index length: 160mm, max. forming capacity: 80cycles/min, packaging capacity: 240blisters/min, forming film materials: plastics/aluminium, lidding film materials: composite films/aluminium, max. forming depth: 25mm, max. film width: 300mm, film core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 6500kg. Including a defective HAPA 216 blister printer. Dokumentation vorhanden. An on-site inspection is possible. Nsdpexyk Uvsfx Ahvjkw

Condition: ready for operation (used), Year of construction: 2003, A Klöckner blister packaging machine and cartoner are available. 1) Blister machine Klöckner CP200, year of manufacture: 2003, output: 50/min, formats X/Y min./max.: 50mm x 22mm/156mm x 115mm, max. draw depth: 12mm, film width range: 100mm-168mm, forming film diameter: 450mm, lidding film diameter: 240mm. Documentation available. 2) Cardboard packaging machine Klöckner P1500, year of construction: 2003, packaging capacity: 200/min, formats X/Y/Z min./max.: 20mm x 15mm x 50mm/250mm x 115mm x 190mm, machine dimensions X/Y/Z: approx. 5200mm/1500mm/1900mm, weight: approx. 4000kg, control: Siemens S7 PLC. Documentation available. Some parts of the machines have been dismantled. Nkodpfx Ahjucfw Ajvjw

Condition: good (used), Production: alloyed Tip: 4 sec Turntable Njdpfx Aheuhn Dcevekw

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Nkodpfx Ajuhn Diohvjw Turntable

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! Nkedpeuk Dwfofx Ahvjw For spare parts only!!

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized Nsdpfx Ahjtndpzevokw transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. Nkodpfx Ahevubapjvsw The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Njdpfxsv Nkvce Ahvekw Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Nkedpsywg Rdofx Ahvjw Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: used, Year of construction: 2014, Technical details: Nkjdpoyv Erdefx Ahvew max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 66 mm spindle bore diameter: 76 mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/0 BMT 55 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 490 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: used, Year of construction: 2015, Technical details: max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 52 (66) mm spindle bore diameter: 61 (76) mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/12 BMT 55 Power rotary tools: 3,7 /2,2 kW RPM of rotary tools: 6000 1/min torque rotary tools: 26,2 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 400 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Nkjdpoyv En Sjfx Ahvow Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, We are selling our Knuth Werkzeugmaschinen GmbH lathe. High-quality centre lathe with leadscrew and feedshaft, equipped with a 3-axis position display. We are relocating and no longer require the machine, so it is available for sale. It is currently still in operation and can be inspected on-site. Proven classic with gear transmission: - Cost-effective and retains its value - Clearly arranged control panel with ergonomically positioned selector levers - Camlock spindle mount D1-6 - Wide, ground and hardened bed with a solid one-piece cast base - Tailstock can be offset laterally for taper turning - Large selection of thread pitches - Removable gap bridge for machining large diameters - Stop spindle with four adjustable length stops - Optional: quick-change toolpost system, among others 3-axis position display: Nedpfx Ahoyxfuqjvekw - Higher machining accuracy - Reduced error rate - Greater production reliability - Significant time savings - Increased productivity - Optimal legibility of the display - User-friendly functions - Clearly arranged keypad - Resolution 0.01 / 0.005 mm - Pre-setting of coordinate values - Retains axis position when display is switched off - Bolt hole circle calculation - Integrated calculator function - Memory for 10 tools - Switch between radius/diameter display - mm/inch conversion - Easy mounting, maintenance-free operation - Display of cross slide (Z0) and carriage (Z1) both individually or as a differential/sum value on lathes Technical data – Turnado 230/1500 – Centre lathe with leadscrew and feedshaft Working area - Centre distance: 1500 mm - Max. swing over bed: 460 mm - Max. swing over cross slide: 270 mm - Max. swing over gap bridge: 690 mm - X-axis travel: 285 mm - Z1-axis travel: 128 mm - Gap bridge length: 165 mm - Bed width: 300 mm - Top slide swivel range: ±52° Main spindle - Spindle speed (12 steps): 25–2000 rpm - Spindle bore: 58 mm - Spindle mount: Camlock D1-6 - Spindle taper: MT 6 Feed - X-axis feed: 0.014–0.784 mm/rev - Z-axis feed: 0.031–1.7 mm/rev Thread cutting - Metric threads (41): 0.1–14 mm - Diametral pitch threads (50): 4–112 DP - Module threads (34): 0.1–7 mm - Whitworth threads (60): 2–112 TPI Tailstock - Tailstock quill diameter: 60 mm - Tailstock taper: MT 4 - Tailstock quill travel: 120 mm - Tailstock lateral adjustment: ±13 mm / ±0.5" Drive capacities - Main drive motor power: 5.5 kW - Supply voltage: 400 V Dimensions and weight - Dimensions: 2750 x 1080 x 1340 mm - Weight: 1970 kg

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. Nksdsq N Ud Iopfx Ahvjw 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: 12097, CNC Milling Machine XYZ SMX3500 The machine is in very well-maintained condition. ● Condition: Not inspected ● Delivery terms: Free on truck (FOT) ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – Collection date for the item is set for 06.05.2026. Unfortunately, collection outside of this timeframe cannot be accommodated. ● Payment terms: Advance payment by bank transfer ● Internal ID: DÄ10 ● Power-on demonstration possible: Yes Technical specifications: ● Control: PROTO TRAK SMX ● Table dimensions: 1200 x 300 mm ● Spindle speed: 5,000 rpm ● Main drive power: 3.75 kW ● 400 V Nkedpfx Aeyvi Enshvew ● 50 Hz Scope of delivery: ● Available manuals (completeness not guaranteed) ● Hoffmann vice, jaw width: 125 mm ● Machine lamp Dimensions & weights: ● Installation dimensions (L x W x H approx.): 2000 x 2000 x 2500 mm ● Weight approx.: 2,500 kg If you have any questions or would like to arrange an inspection, please feel free to contact us! Additional notes: ► On request, we can offer transport to the destination ► The quoted price is net, plus VAT ► The goods are sold under exclusion of any warranty ► Technical data provided without guarantee ► Subject to prior sale ❗Sale of the item is exclusively to businesses❗

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Unchecked ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The pickup period for the equipment is set for 06/05/2026 and 07/05/2026. Unfortunately, collection outside this timeframe cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal reference number: DÄ5 ● Inspection under power: Yes Technical specifications: ● Control system: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● Three-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: ● Available manuals ● Set of quick-change tool holders with turning tools ● Four-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories as shown in the images Dimensions & weight: ● Footprint (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg Nsdpfoyvi A Tjx Ahvokw If you have any questions or wish to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The equipment is sold with exclusion of any warranty ►Technical data provided without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Nsdpfjxd Dgyox Ahvskw Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: used, Year of construction: 1995, functionality: limited functionality, bar diameter (max.): 75 mm, cnc old machine spindle hole 75 mm Nkedsyv Upljpfx Ahvow

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. Nodpfx Ahjyur Nlsvskw The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm Nsdpfxexdmgvo Ahvskw CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm