Used Blacksmith Forge for sale (174)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Klodjzldwuopfx Ap Asw Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, hydraulic forging hammer (H5) Manufacturer: BECHE Type: KGH 31.5 Year of manufacture: 1976 Energy: 31.5 kJ Machine foundation with spring damping elements Forging furnace Gas-heated Kodpsziw N Eefx Ap Ajlw Power: 400 kW New Siemens S7 control system, refurbished

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Type: HO - U 400 SO Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Kledpoziw Nxjfx Ap Asw Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Kodpfjziw Nlsx Ap Ajlw Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Klsdpfxjy Ud N So Ap Aow Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Kodpfx Asvbcxtsp Aolw Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Klodpfox Ahbfex Ap Aow

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; -mode of operation – pneumatic; -table size (front to back) - 700mm; Klsdpfxofbnhwj Ap Ajw -stroke - 800mm; -number of blows per minute – 110; -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; -height of machine above floor - 3750mm; -total machine's height - 4380mm; -total weight - 35t;

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Manufacturer: LASCO Type: HOU 250 SO Kedpfxjzidv Se Ap Aolw Year of manufacture: 2005 Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 64,000 kg, workpiece weight (max.): 18 kg, 1. Forging hammer HUTA ZIGMUNT type MPM 2000A Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 62.5 ton Anvil weight: 45 ton 2. Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1 250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 2600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg 3. Inductive heatinfg device AEG ELOTHERM 400 kW A numbers of different inductors are available in the set. Klsdelnllbjpfx Ap Aow

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Work impact: 4,000 mkg Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Klodpfx Apezh Ncho Ajw Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min.

Condition: excellent (used), Year of construction: 1978, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 24, overall weight: 140,000 kg, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Ksdpfelnlq Dex Ap Ajlw Total weight 140 t

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Kodpfx Aowbginjp Aslw Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: good (used), blacksmith's vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise -Jaw width: 135 mm -Wingspan: 150 mm -Number: 8x vises available -Price: per piece Kodpfx Apsdl E Irs Aslw -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS Kedpfxezcdluo Ap Aelw ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Kedpfszfwt Asx Ap Aelw apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Kljdpfx Asq U R T Nsp Aow Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Kodoq U R Ruspfx Ap Ajlw Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg Kedpfsq U Sa Sjx Ap Ajlw

Year of construction: 2000, condition: used, 400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE MANUFACTURER - HYDROMEC YEAR - 2000 SERIAL NUMBER - 660 Kljdpfxszad Nho Ap Aow MODEL - HF4000 C/D MATERIAL - NON-FERROUS TONNAGE - 400 TON (4000 KN) STROKE - 380MM STROKE PER MINUTE (CONTINUOUS) - 22-35 STROKE PER MINUTE (SINGLE STROKE) - 22-45 RAM ADJUSTMENT RANGE - 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) - 865MM SIZE OF TOOL MOUNTING PLATE - 1000MM X 1000MM MAIN PRESS MOTOR - 59 KW MAIN MOTOR RAM ADJUSTMENT - 2.2 KW CUSHION FORCE - 70 TON (700 KN) CUSHION STROKE - 40 - 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressing force: 800 t, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t Kodpedxvfpefx Ap Aolw dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: used, overall weight: 495,000 kg, Year of construction: 1991, Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Kledpfxov D Ddvj Ap Aow Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Workpìece weight: 2500 kg Min length: 1500 mm Max length: 3000 mm Engine forge: 2 x 500 kW, 5500 V, 50 Hz Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Condition: ready for operation (used), Perforated plate Ksdpfx Aefpgp Ejp Aslw Manufacturer unknown Dimensions: 1500x1500 mm Working height: 940 mm – height adjustable Feet are screwed on Plate thickness: 110 mm Hole diameter: 45 mm Weight: approx. 2.0 tons

Condition: good (used), Year of construction: 1985, Manufacturer: RADAELLI Model: 1000/S2 Year: 1985 Condition: Used Stock number: 0388 Press force: 1000 tons Press points: 2 Kjdpsyrigpofx Ap Ajlw Ram dimensions: 2,820 x 2,200 mm Table size: 3,150 x 2,200 mm Ram stroke: 500 mm Die height at BDC: 1,000 mm Ram adjustment: 190 mm Strokes per minute: 15 spm Pneumatic cushion present

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M04L/8718, Offer Number: M04L/8718 Machinetype: pointing and pincing machine Info: vibratory feeder Make: NATIONAL HARTFORD Type: FORGE-MATIC 2 F.M. Constr. year: 1980 diameter range: 12 mm Kjdjwi St Uopfx Ap Aolw shaft length under head: 120 mm output - pieces/min: 300 Location: In our warehouse