Used Blacksmith Forge for sale (231)

Condition: excellent (used), Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Isdpjw Tulgofx Affetr Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Ijdpfx Afet Ag Udsfstr

Year of construction: 2008, condition: used, Equipment for fitting assembly 1 FAA S3 for folding, opening and opening and folding fittings for wooden and PVC casements in automatic design, working procedure from left to right - automatic clamping and positioning sash - automatically travelling screwdriver with automatic screw feed, servo-driven, working in X and Y axis - preparatory assembly table fitted with slide rails, dimensions 1,300 x 3,000 mm, including ten automatically recessed wing stops, servo-driven travelling stop for hardware cutting with PC control - Grid rack for fittings - 33 compartments, including PC compartment - PC control, floppy drive, Windows NT Wing transport device 1 for automatic wing feed for the second screwdriving cycle Device 1 for automatic height adjustment of the travelling screwdriver via PC. Device for manipulation of scissor fittings 1 for closing and hooking open scissors Hand-held reading device 1 Automatic handing device/ 1 transfer of the forged wing to the next station ETHERNET network card 1 Number Machine name Pcs Item Automatically folding and feeding 1 table for removing the galvanised wing in horizontal position for subsequent Itjdpfx Afew Tcu Nefer transport and storage in vertical position into the appropriate shelving rack, for sash dimensions with a width of 350 - 1.650 mm and a height of 350 - 2,500 mm, including cabinet switchboard and SPS control Servomotor landing gear 1 and servo controller for travel of the tilting table, sorting trolley, including drive unit, max. speed 65 m /min Rail tracks 7m made of thick-walled U-profiles for roller bogies with toothed shaft for running a tiltable table and sorting trolley Compartment rack (15 compartments) 3 with automatic wing insertion, compartment width 110 mm, compartment height drawer height 2.600 mm, depth of the shelf 1.100 mm, overall width of the rack 2.130 mm Display indicator 1 to display the relevant compartment shelf, including software equipment for sorting the leaves into appropriate compartments Protective fence 1 Entrance door for protective fence 1 with limit switch

Condition: excellent (used), Year of construction: 2014, load capacity: 400 kg, arm reach: 2,550 mm, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2014 Isdpfx Aeq Ap Dweffjtr Payload: 400 kg Reach: 2550 mm Type: Foundry Plus Working hours: 38982 Condition: Used & Tested Cabinet: M2004 Teach Pendant: Included Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. Please note that the price does not include shipping costs. (Source: ABB's Website)

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, Tipping ram: Hyva, chrome-plated tipping ram matel - stroke 7100 mm - tipping warning signal, connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) screw connection - female! Cranked aluminum chassis, aluminum body with tunnel, steel support legs, SAF off-road axles, 1st axle lift axle, 6x 385/65 R22.5 Bridgestone RT tyres, 1 towing hitch, round LED rear lights, 2+1, quick-release tarpaulin lock. Toolbox, removable step ladder, 2 shovel holders (outside), 25L water tank, ASW in front cargo area, pneum. Vibrators at the front of the floor with control valve on the left side, grain bunker with brackets on each grain chute lBin smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient inner thickness (3 mm at half height) - Inner length 9.50 m - Inner usable height 2200 mm - Inwardly beveled top chord profiles, floor trough with tunnel - Floor thickness 5mm, Inside usable width (mm) 2410, floor reinforcement struts - Doubling of the top chord profiles - Front wall 14° sloping front wall - Thickness 4mm - Conical recess and reduced to 450mm interior space Door Universal door - Double linkage locks - Folding upper crossbar - 2 door leaves - 1 grain slider with protective cover in each leaf - Rubber seal on the leaves and on the rigid frame, Door wing type Smooth-walled door wings Continuous welds on the inside of the door, roller tarpaulin system - White transparent strips - Side tensioning straps - Round aluminum roof bows (100mm spread) - Rounded upper part, hinged, adjustable, removable, foldable on the side - Aluminum forged MULTIFUNCTION Tarpaulin stops (straight - offset - foldable), Tarpaulin pole Yes Half locking bar - Door lock Pneumatic automatic unlocking of the swing frame with 4 hooks Upper door hinge Swing flap upper aluminum Double ratchet - Removable Integrated in the side wall height Grain pusher Right & left (aluminum) Iodpfx Afjrt N Sfofetr

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. * Protected against overload. * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. Isdpfx Aow Smfcsffjtr OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Condition: ready for operation (used), Forging hammer CM 2500, Romania. The hammer is similar to Huta Zygmunt MPM 6300B. Isdpjw Sdxajfx Affjtr - Maximum impact energy at maximum stroke – 7000 kgm - Ram weight – 2500 kg - Mode of operation – pneumatic - Ram stroke – 850 mm - Number of blows per minute – 100 - Working pressure – 5 - 7 bar - Anvil weight – 48 t - Total weight – 65 t

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Itodpsmza S Ejfx Affjr Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Itodpfx Afewm Nm Tjfer

Condition: good (used), Year of construction: 2004, operating hours: 92,947 h, load capacity: 400 kg, arm reach: 2,550 mm, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Please note that the price does not include shipping costs. Year: 2004 (Multiple options and bulk buying discounts available) Type: Foundry Cabinet: NOT Included (Works with M2000) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: NOT Included but we can try to find them for you Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. Itsdpfx Afsq Ap Ddsfsr (Source: ABB's Website)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 Isdpsw Nxnwefx Affetr diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system Iodpfjw Smdfex Affotr * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; - Ram weight – 3,150 kg; - Mode of operation – pneumatic; - Ram stroke – 900 mm; - Number of blows per minute – 90; Iedjw Sdwvopfx Affotr - Working pressure – 5 – 7 bar; - Anvil weight – 63 t - Total weight – 100 t.

Condition: used, empty load weight: 2,300 kg, maximum load weight: 20,000 kg, overall weight: 22,300 kg, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,000 mm, tire size: 450x300, color: orange, Year of construction: 2025, operation weight: 20,000 kg, Heavy duty transport trailer with dimension 4000 x 2000 x 610 mm Payload 20 tons at 6 Km/h Steering All-wheel steered steering knuckle with adjustable tie rods Itsdpfx Afjn D D S Sefer tires bandages 450 x 300 on steel rims with conical bearings on both sides, drawbar with forged drawbar eye 40 mm drawbar with drop safety device, transport floor 40 mm spruce countersunk Bolted. Each long side welded to the frame stop eyes for load securing. Double-acting wheel chock mounted on the frame

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Iedpfx Afowm Nm Hofstr

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, roller length: 4,100 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * Lower and side rolls are connected to the body by hydraulic pistons and perform vertical linear movement * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * Roll positions are easily read via three digital indicators * Hydraulic opening head and automatic upper shaft lift allow easy removal of rolled parts * Easy operation using a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened forged or rolled steel shafts Isdpfxjw Smc Ij Affjtr * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports to assist with large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-bending : 10/12 mm Bending : 12/16 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2250 mm Height : 2350 mm Weight : 22000 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Iodpfew Smb Rsx Affjtr Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Itjdew Sl T Sepfx Affjr Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, roller length: 4,100 mm, sheet thickness (max.): 25 mm, power: 38.5 kW (52.35 HP), STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Thanks to the hydraulically opening head and automatically lifting shaft, the bent workpiece can be easily removed * Very easy operation with a movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control automation * Overhead crane (elevator) for support during large diameter bending Iedsw Sl I Njpfx Affstr * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending Thickness: 16/20 mm Bending Thickness: 20/25 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet, aluminum, or stainless materials - Highly suitable for bending round materials and materials of various diameters - Bottom and side rolls are hydraulically driven up and down with direct linear movement - Protected against overloading - The top roll is driven by an electric motor and planetary gearbox. The bottom roll is driven by a cardan coupling system. Two rolls are driven - Position of the rolls can be easily read with three digital indicators Iedpjw Slxzsfx Affjtr - The hydraulically opening head allows easy removal of the bent workpiece - Very easy operation with a movable control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Complies with EU safety standards and has CE marking - User manual OPTIONAL EQUIPMENT - Remote support with NC control - Top crane (lift) for supporting large diameter bending - Hydraulic side supports for supporting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Stepless speed adjustment - Hydro-motor driven rotation - Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Particularly suitable for bending light and medium gauge sheet, aluminium or stainless steel materials - Ideal for round and various diameter material bending applications - Lower and side rolls move vertically through direct hydraulic linear motion - Protected against overloading - Top roll is driven by an electric motor and planetary gearbox. Bottom roll is driven by a cardan coupling system. Two rolls are drive-powered - Roll positions are easily read via three digital displays - The hydraulically opening head allows easy removal of the bent workpiece - Very easy operation via a mobile control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Cone bending system - Hydraulic balancing system for parallel movement of the rolls - Compliant with EU safety norms and carries the CE mark - User manual OPTIONAL EQUIPMENT - Remote service via NC control - Top crane (hoist) for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Dual Speed Adjustment System - Infinitely variable speed adjustment - Hydromotor-driven rotation - Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Iedpow Sllhefx Affjtr Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 6100 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending materials into round and various diameters Lower and side rolls move up and down hydraulically via direct linear motion Protected against overload Upper roll driven by electric motor and planetary gearbox. Lower roll driven by cardan coupling system. Both rolls are driven Positions of the rolls easily readable via three digital displays Bent workpiece can be easily removed thanks to the hydraulic opening head Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of the rolls Conforms to EU safety standards and bears the CE mark User manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (elevator) support for large-diameter bending Hydraulic side supports for large-diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Isdpfx Ajw Slkkeffstr Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Itodpjw Slctofx Affjr Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Itjdpfxsw Slcgs Affor Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Iodpfx Afow Slbvefotr Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg