Used Blacksmith Forge for sale (175)

Condition: new, Year of construction: 2026, functionality: fully functional, New HC-1500 Suspension Monorail Shot Blasting Machine Description: The HC-1500 suspension monorail shot blasting machine from ABRAZIV Kft. has been developed for the economical surface treatment of cast, forged, and welded parts as well as smaller steel structures. It is ideally suited for descaling, derusting, cleaning, and roughening a wide variety of workpieces. The machine is manufactured to order and can be individually configured according to customer requirements. The HC-1500 features a Y-shaped suspension monorail with two carriers, which enables continuous operation. While one carrier is in the shot blasting process, the second can already be loaded or unloaded. The machine is equipped with three high-performance ABR-400 shot blasting turbines, which are arranged at different angles. This ensures uniform and thorough cleaning of complex workpiece geometries. The internal surfaces of the shot blasting chamber are lined with highly wear-resistant manganese steel in the active shot blasting area. Other areas are protected by wear-resistant rubber, which also reduces noise levels. A closed shot blasting media circuit with a collection hopper, screw conveyor, bucket elevator, air separator, and dosing system ensures reliable and economical operation. A high-performance cartridge filter with a fan is included in the scope of supply for the extraction and filtration of dust generated during the shot blasting process. All functions of the machine are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical data Workpiece dimensions Klsdpfozifcgox Aftsw Maximum workpiece height: 2,000 mm Maximum workpiece diameter: 1,500 mm Shot blasting turbines Number: 3 Type: ABR-400 Turbine diameter: 400 mm Speed: 2,400 rpm Shot blasting media flow rate: 180 kg/min Motor power per turbine: 11 kW Suspension monorail Load capacity per carrier: 500 kg Power consumption Machine power: 37 kW Cartridge filter: 7.5 kW Compressed air: 6 bar Compressed air consumption: 8 m³/h Other data Shot blasting media capacity: 1,800 kg Recommended shot blasting media grain size: 0.4–1.2 mm Extraction capacity: 6,000 m³/h Supply voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optionally available: Electric hoist Extended suspension monorail Frequency inverter Automatic shot blasting media dosing Special coating Transport Installation Commissioning Operator training Spare parts supply Maintenance and service Application areas The HC-1500 is particularly suitable for: Cast and forged parts Welded structures Small steel structures Mechanical engineering Tank and apparatus construction Job-order shot blasting operations Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our suspension monorail shot blasting machines individually according to customer requirements. In addition to the HC-1500, other sizes and special designs are available. We will be happy to advise you on the design of the appropriate machine and provide you with a non-binding offer. Price on request

Condition: refurbished (used), functionality: fully functional, air demand: 6 m³/h, compressed air connection: 6 bar, warranty duration: 6 months, workpiece weight (max.): 800 kg, Fully Overhauled Rubber Belt Blasting Machine GH-4 For sale is a fully overhauled rubber belt blasting machine GH-4, professionally refurbished by the manufacturer ABRAZIV. This machine is ideally suited for deburring, descaling, cleaning, and surface roughening of castings, forgings, press parts, and other bulk goods. Its robust design and reliable blasting technology make it versatile for use in foundries, forging shops, and the metalworking industry. The machine has been professionally overhauled (refurbished) and is in perfect technical condition, like new. It is immediately available and can be inspected by appointment. Technical Data Kledpfxszicuaj Aftew Blasting Chamber Rubber belt width: 1,300 mm Belt drum diameter: 1,150 mm Maximum batch weight: 800 kg Blasting media capacity: 800 kg Blasting Turbines Number of turbines: 2 Power per turbine: 11 kW Connection Values Electrical connection power: 27.5 kW Compressed air connection: 6 bar Compressed air consumption: 6 m³/h Extraction capacity: 5,500 m³/h Condition Fully overhauled (refurbished) Technically inspected Immediately available As the manufacturer, we can also offer you the following services, if desired: Transport Installation Commissioning Operator training Spare parts supply Maintenance and service Location: Kecskemét, Hungary Inspection is possible at any time by prior appointment. Price on request.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under Klsdpfov T Trujx Aftsw full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 510 mm, cutting width (max.): 510 mm, control type: PLC-controlled, roller diameter: 80 mm, pivoting range: 90 °, actuation type: electric, rotational speed (max.): 20 rpm, rotational speed (min.): 80 rpm, total height: 3,000 mm, total length: 1,200 mm, total width: 3,200 mm, overall weight: 4,500 kg, table height: 810 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Technical Specifications Cutting capacity: 510 × 510 mm Band saw blade: 54 × 1.6 mm Main motor power: 7.5 kW Machine weight: 3,750 kg Semi-automatic operation Hydraulic cutting feed Planetary gearbox Kjdpfezhl Rbsx Aftjlw Siemens SIMATIC S7-1200 control system Key Advantages Brand-new machine – never used Last machine produced before the model was discontinued Heavy-duty double-column construction Wide 54 mm blade for maximum cutting performance and blade life Designed for cutting solid bars, forgings, stainless steel and tool steel Modern Siemens control system with full manufacturer support Available for immediate delivery

Condition: used, Year of construction: 2008, operating hours: 12,183 h, machine/vehicle number: 1060142, turning diameter: 32 mm, spindle speed (max.): 5,000 rpm, overall weight: 4,000 kg, Frontal twin-spindle lathe for re-machining rough-turned parts produced by cold forging, turning, or sintering. Kedpfx Ajzhktzoftelw Integrated dual-gripper robot for loading and unloading.

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Kjdpfx Aow Dgi Tjftolw Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine xH: 2,4 x 1,7 x 1,44 m height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Ksdezdnlajpfx Aftslw Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: ·Turned parts ·Milled parts ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. i.D. *

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm Klodpfx Aszha Hqoftsw • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: electric, color: other, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Klsdpfx Aszhaxmjftjw

Condition: used, machine/vehicle number: 20023-1, Bolt Former Chun Zu 4 Dies Model: CBF-64S Forging load: 40 tons Max cut-off diameter: 8 mm Max cut-off lenght: 95 mm Kledpfozg Nmqox Aftew Max lenght under head (KO): 80 mm Max. Output: 240 parts/min Year: 2001

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, Tipping ram: Hyva, chrome-plated tipping ram matel - stroke 7100 mm - tipping warning signal, connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) screw connection - female! Cranked aluminum chassis, aluminum body with tunnel, steel support legs, SAF off-road axles, 1st axle lift axle, 6x 385/65 R22.5 Bridgestone RT tyres, 1 towing hitch, round LED rear lights, 2+1, quick-release tarpaulin lock. Toolbox, removable step ladder, 2 shovel holders (outside), 25L water tank, ASW in front cargo area, pneum. Vibrators at the front of the floor with control valve on the left side, grain bunker with brackets on each grain chute lBin smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient inner thickness (3 mm at half height) - Inner length 9.50 m - Inner usable height 2200 mm - Inwardly beveled top chord profiles, floor trough with tunnel - Floor thickness 5mm, Inside usable width (mm) 2410, floor reinforcement struts - Doubling of the top chord profiles - Front wall 14° sloping front wall - Thickness 4mm - Conical recess and reduced to 450mm interior space Door Universal door - Double linkage locks - Folding upper crossbar - 2 door leaves - 1 grain slider with protective cover in each leaf - Rubber seal on the leaves and on the rigid frame, Door wing type Smooth-walled door wings Continuous welds on the inside of the door, roller tarpaulin system - White transparent strips - Side tensioning straps - Round aluminum roof bows (100mm spread) - Rounded upper part, hinged, adjustable, removable, foldable on the side - Aluminum forged MULTIFUNCTION Tarpaulin stops (straight - offset - foldable), Tarpaulin pole Yes Half locking bar - Door lock Pneumatic automatic unlocking of the swing frame with 4 hooks Upper door hinge Swing flap upper aluminum Double ratchet - Removable Integrated in the side wall height Grain pusher Right & left (aluminum) Klodpert N Sfjfx Aftew

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit Ksdpfx Afezc Rv Tetolw * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: new, working width: 1,250 mm, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Seppi M. H7 125 flail mower / incl. swivel ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - mulches grass and light brush up to 7 cm in diameter - for excavators from 5 to 15 tons - Universal interface for mounting various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: Housing: with replaceable wear plates - LOW PROFILE: Low profile design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the flow rate of the carrier machine - 4D ROLLER: reinforced support roller 152 mm Ø, with double tapered roller bearing, height adjustable - COUNTER CUTTERS: two rows of replaceable forged counter blades - Rotor wall thickness: 12.5 mm - Front protection with chains - Rear protection made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flail (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW Kljdpfsy E Etyjx Aftsw - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating mounting (parallelogram guidance) OPT 555 Swivel adapter OPT 372 hydraulic 190° swivel device 3 hydraulic lines are required: feed, return and leakage oil. Optional: MS08 adapter plate incl. screws and mounting = €880.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Seppi M. products that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale are subject to change! Intended use: Agriculture Please contact Marius Herden for more information.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h Kedey Hi D Sepfx Aftjlw All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Continuous Wire Mesh Belt Dephosphating & Washing Machine Manufacturer: Aquaflot s.r.o. Year of Manufacture: 2002 Condition: Available for inspection We are offering a well-maintained continuous wire mesh belt dephosphating and washing machine, suitable for cleaning and surface treatment of steel components prior to heat treatment, coating, painting, or assembly operations. Key Features - Continuous operation with wire mesh belt conveyor Kedjzf Hmropfx Aftjlw - Designed for dephosphating and washing processes - Suitable for medium to high production volumes - Robust industrial construction - Easy integration into existing production lines - Reliable and proven technology Applications - Automotive components - Fasteners and fixing elements - Forged and machined parts - Heat treatment preparation - General metal finishing operations The machine is currently available and can be inspected by appointment. Additional technical information, dimensions, photographs, and videos can be provided upon request. Location: Germany Delivery Condition: Ex Works (EXW) Contact: Fornax Machinery GmbH Please contact us for further details and pricing.

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm Kodpfx Ajzb Ufvsftjlw • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: used, ORT 3RP10 PLC thread rolling machine inverter (RPM) scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die. Klsdpfjzbx D Nsx Aftsw Number of rollers: 3

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 25 m³, loading space length: 5,000 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, tail-lift, Welcome to carmax24! Today, you have the opportunity to purchase one of our selected, inspected vehicles. Expertly inspected and high-quality vehicles ensure high customer satisfaction, and have done so since 2008. This is our daily approach, because you, the customer, are our top priority at carmax24. Iveco 35s18HA Diesel 3.0L - Flatbed with Tarp, 10 Pallets, 8-Speed Automatic Vehicle Description Type: 35S18A8H Engine: Euro VI E, 176 hp Displacement: 3.0 l Transmission: Automatic transmission Wheelbase: 4100 mm Color Code: White Permissible Total Weight: 3500 kg Vehicle Type: Truck Additional: Rubber floor mats ----Standard Optional Equipment (Factory): * 00344 - Rear view camera * 05925 - Additional speed limiter (adjustable and switchable) * 07629 - Without acoustic signal * 06064 - Reinforced double parabolic springs in the rear (for S-models) * 08628 - Storage compartment above the windshield ----STYLE PACKAGE 3.5 S: * 79336 - Daily radiator grille with chrome strips * 01553 - Emblems in gunmetal color * 02443 - Leather steering wheel * 02308 - Daily aluminum rims * 72625 - Full LED lighting (daytime running lights, low beams, high beams) ----COMFORT PLUS PACKAGE: * 00259 - Comfort driver's seat (air-sprung) * 01611 - USB port A+C (driver and passenger side) * 75082 - 2-seater passenger bench with folding table, 3-point seat belts * 07196 - Air conditioning compressor 170 cm³ * 01605 - Infotainment system NAVI MY IVECO with 10-inch display * 14522 - Adaptive cruise control (ACC) with radar sensor * 06650 - Automatic air conditioning (heating and ventilation) * 79297 - Fully padded headrests with memory foam and Daily logo ----Superstructure - manufactured by Widar Dimensions (approx.): 4900 x 2200 x 2300 mm Tarp color: Black ----Standard description of the aluminum superstructure (MaxTrans): * Aluminum auxiliary frame profile - 108 mm * Aluminum cross member profile - 70 mm * Circumferential frame profile (anodized) - 70 mm * Floor made of non-slip plywood - 15 mm * Fixed aluminum corner posts at the front/rear (black anodized) - 133 mm * Front panel 400 mm anodized + additional plywood panel 1250 x 15 mm * Side panels (monolithic, anodized) - 400 mm with cam locks * Rear panel 400 mm with integrated step * Forged stainless steel hinges (corrosion-resistant, without wear marks) * Divisible side panels with removable center post (from 3800 mm superstructure) * Tie-down points: movable, 2 per meter of superstructure * Aluminum tarp frame * Four rows of aluminum tubes in the roof * Three rows of tarp pockets with wooden slats * Lighting according to road traffic regulations * Fenders with mud flaps * Translucent roof (skylight) * LED cargo area lighting * Tarp with customs seal (rope) ----Additional equipment: * Roof spoiler with side wind deflectors * Sliding tarp (side tarp, one-sided with steel tensioner) * Anti-bicycle protection (over 2000 mm length) * Frame extension (required for this superstructure) Kledpfx Afezdx Dyetew * Rear tarp roll system * Tool box * Sliding roof +30 cm (with gas struts) ---- Our special service for you: * Maintained according to service booklet at authorized dealers and certified workshops * Winter tires available for an extra charge * Warranty insurance up to max. 36 months possible for an extra charge * We will gladly and fairly take your used vehicle in trade! * Financing options from 6.99% with or without down payment up to max. 96 months, with bonuses

Condition: used, Year of construction: 2026, Working width: 6.40 meters Width in working position: 6.75 meters Number of rotors: 6 Number of tine arms per rotor: 6 Transport width: 2.95 meters Transport height: 3.30 meters Kjdpfx Afezdmt Njtslw Turning at the field edge: by manually adjusting the wheel angle Grass deflectors above the tine rows Fixed spreading angle adjustment Rotor drive via DIGIDRIVE finger coupling made of forged, case-hardened steel PTO speed: 540 Balloon tires 15x6.00-6 Outer rotors folded up hydraulically for transport Three-point hitch, Cat. 2 Swiveling head follow-up device Mechanical vibration damper 1 single-acting hydraulic cylinder Power requirement at the PTO: 22 kW / 30 hp Weight: approx. 850 kg New machine - image is for illustration purposes Location: 54595 Prüm

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) - segmented roller dies Kljdpowvrazofx Aftow - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance. Klodpfx Afjy Ugtajtsw

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible Kedpfx Aox Sr Dfsftslw - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: used, mileage: 4,400 km, power: 592 kW (804.90 HP), fuel type: gasoline, gearing type: automatic, first registration: 04/2025, next inspection (TÜV): 04/2027, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, soot filter, G63 AMG fully equipped: Ksdpfxjyq U Aao Aftelw Additionally featuring: - Performance upgrade to 800 HP - H&R coilover springs - Entire vehicle wrapped in transparent, self-healing XPEL film (including headlights and side skirts) - Triple ceramic coating applied to the vehicle, wheels, and brake calipers Equipment includes: B01 48V Technology; B24 Remote control for auxiliary heater; B61 AMG DYNAMIC SELECT; CK0 AMG specific exhaust system in black; C51 Illuminated door sills, four-fold, in stainless steel; FL0 Partition net; FM2 Safety vests for driver and passengers; GK2 MANUFAKTUR logo package in black; E20 MANUFAKTUR logo projector in exterior mirror; T91 MANUFAKTUR door knob in black with embossed logo; G44 AMG SPEEDSHIFT TCT 9G; L6J AMG performance steering wheel in Nappa leather; PAZ AMG Night Package II; CS1 Mercedes star front and rear in high-gloss black; 7U1 AMG emblem on bonnet in dark chrome; 7U8 High-gloss black typography; PBG MBUX Navigation Premium; PK1 Comfort package; 231 Garage door opener; 311 Temperature-controlled cup holders; 889 KEYLESS-GO; 897 Wireless charging for mobile devices in the front; PK2 Active Multicontour Seat Package Plus; PBR ENERGIZING Package Plus; HA1 Interior air ionization; PT1 Technology package; PA8 Parking package with 360° camera; 04U Transparent engine hood; 501 360° camera; P79 Assistance package; 234 Blind Spot Assist; 239 Active Distance Assist DISTRONIC; 266 Active Steering Assist; 273 Exit warning function; PT3 AMG Performance Package; A22 AMG ACTIVE RIDE CONTROL suspension; BS2 AMG brake calipers front and rear painted red; RG4 22" (55.9 cm) AMG forged wheels cross-spoke design; 250 AMG Driver's Package; 256 AMG TRACK PACE; PW1 Warmth Comfort Package; 443 Heated steering wheel; 597 Heated windscreen; P77 SUPERIOR Line Interior; JC1 Dashboard in Nappa leather; 414 Sunroof; 810 Burmester® 3D surround sound system; P82 GUARD 360° vehicle protection plus; 551 Anti-theft and break-in warning system with pre-installation for collision detection; 882 Interior protection; Q55 Trailer coupling with ESP® trailer stabilization; RS1 Spare wheel on rear door; S39 MANUFAKTUR seatbelts in red; S81 Diamond design; T81 MANUFAKTUR running boards in black; U19 MBUX augmented reality for navigation; U82 2 rear USB ports; U88 AMG steering wheel buttons; VG0 Rubber mat set; V36 MANUFAKTUR grab handles in leather; V42 AMG floor mats black; Y51 Stainless steel load edge protection; ZG6 AMG carbon trim elements; ZT7 Trim element on grab handle with "MANUFAKTUR" script; 01Q LOW RANGE; 01U Pre-installation for navigation services; 02B Operating instructions and service booklet – German; 02Q 100% differential locks; 06Q OFFROAD COCKPIT; 14U Smartphone integration; 20U Pre-installation for digital key handover; 22U MBUX Entertainment; 220 PARKTRONIC Park Assistant; 228 Auxiliary heater; 235 Active Parking Assist with PARKTRONIC; 243 Lane Keeping Assist; 299 PRE-SAFE® System; 32U Sound personalization; 34U Remote Services Premium; 351 Mercedes-Benz emergency call system; 355 Expanded MBUX functions; 362 Communication Module (LTE) for use of digital extras; 365 Hard disk navigation; 367 Pre-installation for live traffic information; 475 Tire pressure monitoring; 51B Rating set for EURO-NCAP; 513 Traffic Sign Assist; 534 MBUX multimedia system; 537 Digital radio; 6U6 AMG fuel cap; 628 Adaptive Highbeam Assist Plus; 642 MULTIBEAM LED; 773 AMG Carbon Exterior Package; B28 AMG exterior mirror housing in carbon design; CA0 AMG specific rad

Condition: used, Technical details: temperature max.: 800-900 ° Ksdpfx Afew Rkuljtslw muffle size (length): 700 muffle size (width): 300 muffle size (depth): 300 mm total power requirement: 90 kW weight of the machine ca.: 0,13 t Small chamber forging furnace. In 2017, the refractory bricks inside were renewed for €5,000. *

Condition: used, pressure capacity max. 500 kg impact capacity / mkp table length / mm Air hammer Kedpfx Afoy S Dxustolw The hammer is functional, due to age reasons, the Sealing sleeves are replaced. - More information will follow shortly -