Used Forging Manipulators for sale (516)

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm Lsdsq U Sa Sopfx Ahksrr square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Ledpfxeq U R T Ns Ahkjrr Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Ljdey Ud N Sspfx Ahksrr Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Lrodezfwt Aepfx Ahker Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2011, total height: 1,000 mm, total length: 1,900 mm, total width: 1,200 mm, Colour: Blue Lrsdpfx Ahszwcdwoksr Empty weight: 500 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 51681+51684 - Model: Dual welding rotator - Max. workpiece diameter [mm]: 3500 - Max. workpiece weight [kg]: 6000 - Options: Continuously adjustable - Transport dimensions: 1900mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Lredpfxozv E Dwe Ahker Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See images Shipping by freight forwarder or collection only after prior arrangement.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2693/4533, Technical data: IHF Jungenthal manipulator, handling device, lifting aid, lifting arm Model Vector 130 (130 kg payload) Manipulator available in quantities of 2!!! Payload at full extension: 30 kg (dependent on equipment/configuration) Height: approx. 4.2 m Upper arm: approx. 3.2 m Reach: approx. 1.6 + 1.9 m = 3.5 m to the articulated arm (height 2.1 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 600 kg Mounting plate 75 x 75 cm Mounting/attachment equipment for tire handling (see pictures) Lsdpozv Et Eofx Ahksrr Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by prior appointment.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Ljdpjzv Hw Eefx Ahkorr Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages Ledpfx Ahozu Akrskerr MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: used, Year of construction: 1985, functionality: limited functionality, pressing force: 400 t, stroke length: 130 mm, table width: 500 mm, table length: 500 mm, overall weight: 8,500 kg, For sale knuckle-joint press type KB8336 made Stanko, effort 400 ton, year of manufacture 1985, table dimensions 500mm*500mm, stroke 130mm, total weight 8500kg. Price is 17500 Euro CIF. Ledpfozugawox Ahkorr

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1741, Technical specifications: IHF - Quick Lift QLA 75-S-GM manipulator, handling device, lifting aid Load capacity at full reach: 75 kg, at the gripper: 25 kg Overall height: approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight: approx. 400 kg Swivel range: 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is dismantled and immediately available. Lrodpfszv Hxpjx Ahker The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities of 80-5000 kg; please inquire. See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, hydraulic forging hammer (H5) Manufacturer: BECHE Type: KGH 31.5 Year of manufacture: 1976 Energy: 31.5 kJ Lrsdpfxjziw N Ej Ahksr Machine foundation with spring damping elements Forging furnace Gas-heated Power: 400 kW New Siemens S7 control system, refurbished

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Lrsdpfoziw Nlox Ahkor Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 1750851, load capacity: 100 kg, Dalmec manipulator with vacuum generator and column. Removed from an unused production line, in perfect condition. Tested, fully functional, practically new. Working range: 2,530 mm Vertical lift: approx. 1,700 mm Lsdpfjxxbczsx Ahksrr Load capacity: max. 100 kg Manipulator weight: 450 kg + column Our company can arrange professional transport and commissioning if required. Please feel free to call us for more details. (English is preferred). The indicated price is for 1 unit. Only 1 unit remaining!

Condition: excellent (used), Year of construction: 1978, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 24, overall weight: 140,000 kg, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Lrjdpfslnlq Dsx Ahkor Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Work impact: 4,000 mkg Lodpfxjzh Ncho Ahkerr Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min.

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only Lsdpfx Ahezrpulskerr with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: F16/56XTA1/A/01, overall weight: 1,120 kg, load capacity: 100 kg, input voltage: 400 V, type of input current: three-phase, Stäubli TX200 industrial robot including CS8CHP controller and Stäubli teach pendant – manufactured in 2016. We are offering a used Stäubli TX200 industrial robot for sale, including the original Stäubli CS8CHP controller. Technical specifications: Manufacturer: Stäubli Model: TX200 Controller: CS8CHP Year of manufacture: 2016 Payload: 100 kg Condition: Used Scope of delivery: Ledpfx Ahszli Huokorr Stäubli TX200 robot Original Stäubli CS8CHP controller Stäubli teach pendant Connection cable Operating manuals Scope of delivery as shown in the photos The robot comes from an industrial research and development environment and has been carefully maintained. The system was in operation until it was dismantled. Inspection is possible by appointment. We will gladly send you further photos or technical information upon request.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Type: HO - U 400 SO Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform Lrjdpfxoziw Nxo Ahkor

Year of construction: 2009, operating hours: 89,479 h, condition: good (used), functionality: fully functional, Grinding robot for machining forged or cast water fittings, operating air pressure 5.5-6 bar, operating voltage 400 V-50 Hz, rated current 13 A, rated power 8 kW, Ledpfx Aozvn Tzshkorr ongoing maintenance until 2026, extensive range of accessories.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings - Drive shaft Lrsdpfx Aszt Dmfohksr - Drive shaft bronze bearings - 3 locking pins - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer.

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Mounting: Ceiling Ceiling guide length: approx. 15 meters Availability: 2 units Load capacity: Manipulator 1 – 30 kg Manipulator 2 – 35 kg Number of axes: 4 Gripper: Pneumatic parts gripper (per manipulator) For suspension on the rail Lredpfxswvi Upj Ahkor

Condition: used, Year of construction: 2018, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 59768, Equipment: documentation/manual, Rethink Robotics Sawyer Robot (Year 2018) – Collaborative 7-axis industrial robot - 7-DOF cobot with safe force sensing / force control - Controller included, pedestal (approx. 930 mm height) for standing workstations - Integrated Cognex image processing + Cognex vision system - Cognex Vision + ClickSmart & EOAT adapter plates (included) - Robot platform with Intera 5 software Collaborative use without safety fencing, intuitive drag-and-drop programming Robust, flexible manipulator for research, automation, assembly, and pick-and-place applications Payload: 4 kg, Reach: 1,260 mm, Repeatability: ±0.1 mm Accessories: - Basic adapter plate for basic grippers End Of Arm Tool (EOAT) detachable mounting plate for attaching the gripper (electric or vacuum) to the Sawyer robot - ClickSmart adapter plate – robot side Ledpfjx Ac U Tjx Ahkjrr End Of Arm Tool (EOAT) detachable mounting plate for attaching ClickSmart grippers (vacuum & pneumatic) to the Sawyer robot - 16-fold gripper Gripper with 16 custom holders for cups (60 g) specified by the customer, dimensions approx. 600x400 mm

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; Lredpfxefbnhwo Ahksr -mode of operation – pneumatic; -table size (front to back) - 700mm; -stroke - 800mm; -number of blows per minute – 110; -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; -height of machine above floor - 3750mm; -total machine's height - 4380mm; -total weight - 35t;

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 332113-01-01, overall weight: 172 kg, maximum load weight: 70 kg, Equipment: CE marking, Manipulator for furniture racks. Device facilitating the lifting of finished cabinet furniture components. Lrjdpfx Aoxz Dw Tohkjr