Used Balancer for sale (851)

Condition: good (used), Complete Butter oil – AMF production line This line makes Pure Dairy Fatt from melted butter or cream by separating and evaporation. Capacity output Butteroil up to 2.000 to 4.000ltr/h Input: melted butter (72-84% fat) or concentrated cream or fat stream which already had phase inversion (45/72%). Output: Pure fat > 99.8% Fatt. A Flexible line with manual controls integrated CIP system Process and equipment description: Heater Plate heater exchanger for heating the mix to 80/90°C Complete with pumps, control valves, piping, sensors. 2 Buffer tanks Volume: approx. 8.000ltr, with agitator, stairs and frame, CIP and product valves. Feed pump make Fristam to the separators. 2 Separators: Separator 1: Concentrator Alfa-Laval model: BRPX413-XGD-14c. Concentrating up to ± 95% fat. Separator 2: Finisher Alfa-Laval model: BRPX413-XGD-14c, Concentrating up to ± 99.4% fat For each separator: The fat (light phase) is pumped out to the next stage and the water/protein (heavy phase) are separated out and ejected to a balance tank and pumped of by a separate pump. The separators have their own control panel, and a frequency converter (Danfoss VLT) on the main motor, and are mechanically complete with the inlet and counter pressure valves, water valves (for solids ejection). Evaporator Flash vacuum dryer Complete with: - Vacuum tank. - Vacuum pump. - Product pump. - Level control by float. - Vacuum controller. - Vacuum cooler - Filter on outlet. - Piping and frame. - Controls in central cabinet. - Recirculation tank with agitator placed directly next to the evaporator. - Sight glass with light to check the clearness of the final product, Concentration up to 99.8% Fatt. This is the last stage of concentrating by evaporating the last water through a flush effect where butter oil is heated under pressure and cooled and exploded in a vacuum vessel. Fgjdezki Amjpfx Ad Ijd Nitrogen injection system N2 Injection system to prevent contact with oxygen in buffer tanks. N2 injection point and its flow meter and control valve Bag filter (cloth) Sight glass with light. Serum separator Next to this there is a separator for the Sirom (heavy phase) to skim/recuperate the remaining fat in the serum and return this into the process. Buffer tank, heater/cooler and pump system are included. CIP system There is a CIP system (semi-automatic) to dose the cleaning detergent from a drum direct into the process. Including: 3 Dosing pumps, a stainless steel storage box for the Drums, injection system, pump, balance tank and controls. Ideal for concentrating a rest stream with fatt in a factory or making Butteroil from butter. Still installed in a Major Butter oil producer factory in The Netherlands.

Condition: used, Year of construction: 2011, Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  - Manufacturer: Paxona - Machine type: Tray line distributor / lane divider - Function: Distribution from 1 lane to 2 lanes - Year of manufacture: 2011 - Operating hours: < 5,000 h - Application: Tray conveying and line distribution - Condition: Used, low operating hours, store Fedoythxaspfx Ad Iegd

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1200603/R, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 3 mm, overall weight: 4,000 kg, input voltage: 380 V, total width: 3,000 mm, total height: 2,250 mm, total length: 7,600 mm, cutting height (max.): 20 mm, table height: 790 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 100 A, working length: 6,000 mm, input current: 31 A, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 200 mm, type of cooling: water, height adjustment type: mechanical, input frequency: 250 Hz, water tank capacity: 25 l, power: 3 kW (4.08 HP), Equipment: documentation/manual, HD Plasma Cutting System – Farina – 2000x6000 mm – Excellent Condition For sale: High-definition (HD) plasma cutting system by Farina, year 2003, in excellent working condition. This machine is a robust and reliable solution, ideal for heavy-duty fabrication and precision work on large formats. Technical specifications: - Brand: Farina Fgjdpfx Adezkhmds Ied - Year of manufacture: 2003 - Worktable dimensions: 2,000 x 6,000 mm - Generator: Hypertherm HD3070 (High Definition), synonymous with quality and precision in plasma cutting. - Included equipment: Dedicated dust extraction system and filters (MA-FER). - Software: Controlled via InfoLab software. - New torch: Original PAC186 torch, upgraded to HyPerformance HD3070 Key features: - Worktable dimensions ideal for handling large sheet metal. - Hypertherm HD3070 technology guarantees superior cutting quality compared to standard systems. - Complete system with dust extraction, ready for use. - Robust machine, perfect for those seeking an excellent balance between investment and productivity.

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Fedpfx Adev Dg A Ue Iegd Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Year of construction: 2022, condition: used, For inquiries regarding the plate compactor, please contact Mr. Herden at [phone number]. Weber CR 6 Hatz-Diesel CCD plate compactor incl. rubber protective mat / electric start / year of manufacture: 2022 / only 2.8 operating hours / DEMO unit / in stock and immediately available / in excellent condition Fsdpfx Aezkduqjd Ijgd Selling price: €7,990.00 net / €9,508.10 gross Technical data Engine: Hatz-Diesel Maximum engine power: 7.5 (10.3) kW/HP Weight: 414 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Incl. rubber protective mat COMPATROL® 2.0 compaction control: - COMPATROL® 2.0 enables uniform and comprehensive compaction - Weak spots in the soil can be detected and corrected in a timely manner - Easy-to-understand and self-explanatory display via LED scale - Up to 25% time/cost savings due to fewer compaction passes. The reversible soil compactors of the CR series excel with their high compaction performance and maximum efficiency. For compaction work ranging from classic road and civil engineering to paving, they are therefore the first choice. Well-balanced running characteristics, high smoothness and low hand-arm vibrations ensure a high level of operator comfort. CR 6 - Economical machine with high compaction performance: - Stepless forward and reverse operation. Hydraulic switchover - Throttle cable and hydraulic switchover protected, routed in the guide rod - Low hand-arm vibrations - Fatigue-free working with the height-adjustable handlebar - Protection of machine and engine through engine protection frame and engine cover - Reduced maintenance effort thanks to the self-tensioning centrifugal clutch - Easy service, as all maintenance elements are easily accessible - Safe and quick loading due to large, foldable crane eye - Secure lashing for transport thanks to additional eyelets in the engine console - Higher operator comfort thanks to electric start - Application areas: road and civil engineering, paving and, thanks to the low overall height and working width, the CR 6 is also ideally suited for trench shoring. In our warehouse, we have a very large selection of different plate compactors that are immediately available! Please contact us for this at [phone number] / [email address]. If desired, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Weber MT range! Errors and prior sale are reserved! Internal No.: 074507 Unladen weight: 414 kg Please contact Marius Herden for...

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm Fedpfx Ajdibw Aed Isgd min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: new, TC 205 x 1000 Center height: 205 mm Swing over bed: 410 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, Size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Continuously variable Mechanical pre-selection stages: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feed Z: 0.05 - 1.7 mm/rev Cross feed X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock diameter: 52 mm Tailstock quill: MK 4 Tailstock travel: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Tool machine accuracy according to DIN 8605 - Continuously variable speed control (2 pre-selection stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base Fodpfx Aoir If Djd Iogd - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed gear with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication - Removable bridge Scope of supply: - 3-axis digital display (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool holder with four cassettes - High splash guard and integrated LED work light - Chip tray that can be extended forward - Slip clutch - Fixed steady rest with ball bearing inserts - Traveling steady rest - Micrometer bed stop - Machine feet (1 set of 6 pieces) - Two emergency stop push buttons - Foot pedal with double braking system (mechanical and electrical) - End-switch protected chuck guard, tool holder guard and cover for the lead screw and ball screw in accordance with European safety standards CE - Coolant system - 2 fixed centering points - Reduction sleeve for main spindle - Operating tool - Operating tool in a tool box - Operating manual with parts list

Condition: new, Maximum turning height: 250 mm Turning diameter over slide: 350 mm Turning diameter in the curve: 695 mm Distance between centers: 1500 mm Spindle nose: DIN 55029, cam lock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Fgedegt E Iljpfx Ad Isd Diametral threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions L x W x H, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker's precision - Stepless speed control (3 pre-selected stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed drive with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication system - Removable bridge - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - Frequency inverter - Machine stand with a high splash guard and integrated lighting - Chip tray that can be pulled out to the front - 3-jaw chuck - Fixed steady rest - Traveling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop push buttons and a foot pedal with an electrical braking system - End-switch protected chuck guard, tool holder guard, and cover for the lead and feed screw according to European safety standards CE - Coolant system - Fixed center - Reduction sleeve for the main spindle - Operating tools in a toolbox

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides Fedjvnrm Hspfx Ad Ijgd - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. table load: 300 kg Fodpfxod Sfd Eo Ad Iegd Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast iron parts, such as machine frame, table, etc., made of MEEHANITE® quality cast iron - Automatic transverse and longitudinal feed - Permanent lubrication - Automatic transverse feed device - Rear splash guard - Grinding wheel - Grinding wheel flange - Dressing device - Balancing arbour - Balancing scale - Dressing diamond - Machine lamp - Leveling elements - Operating tool - Operating manual - CE Special equipment for our stock machine: - Electric magnetic chuck 300 x 600 mm (fine-pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical feed AD 5 (NC-controlled) for model AH - Function: Automatic rapid traverse vertically and automatic fine feed vertically - Automatic demagnetization control for magnetic chuck - Coolant system with magnetic separator - Manual dressing device - Part enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for transverse feed - Grinding wheel and flange for normal steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations available on request.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. Fgodpop Dt Ttefx Ad Ijd - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication Fjdpfx Ajp Dt T Njd Isgd - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 400 x 800 mm Installation height (max. distance spindle/table): 550 mm Max. Table load: 400 kg Motor power main spindle: 3,7 kW Connection: 400 V Dimensions (LxWxH), approx.: 3450 x 2050 x 1900 mm Weight, approx.: 3250 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel Fsdpfop Dt Uisx Ad Iegd - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 3060 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: used, Year of construction: 1998, Technical Data: Grinding Area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding Height: 400 mm Longitudinal Stroke: 740 mm Cross Stroke: 270 mm Clamping Surface of the Table: 1000 x 250 mm Distance Table to Spindle Center: 650 mm Max. Table Load: 400 kg Infinitely Variable Spindle Drive: 6 kW Max. Grinding Wheel Dimensions: ø300 x 60 x 127 mm Coolant System: 170 l Weight – Total Equipment: 4600 kg Features: - Fully electronic multi-axis control system, Brand NE (Manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of CNC axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as digital increment display integrated into handwheel Fodpfjxvy Hgsx Ad Iogd - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil collection pans - CE marking Accessories: - 6x grinding wheel flanges incl. grinding wheels - 3x grinding wheel flanges - 1 extracting device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction unit - Extended vertical column for extraction unit

Condition: used, Year of construction: 1990, functionality: fully functional, Meber SR700 band saw Year of manufacture: 1990 Heavy, precise industrial band saw designed for professional woodworking applications. It belongs to the SR series from Meber, which is characterized by high stability, precise cutting guidance, and a robust construction. Technical data Feature Description Flywheel diameter 700 mm Max. cutting height approx. 450 mm Max. cutting width approx. 680 mm Blade length approx. 5,150 mm (depending on blade width) Blade width 10 – 50 mm Table size approx. 750 x 1,050 mm, tiltable (-10° to +45°) Motor power 4.0 kW Table height from floor approx. 900 mm Total height approx. 2,300 mm Weight approx. 700 kg Robust cast iron construction: Guarantees vibration-free and precise cutting guidance even for heavy workpieces. Large flywheels: Dynamically balanced and with rubber coating for smooth blade operation. Precise guide units: Height adjustable, often with roller or carbide guide systems. Safety devices: Emergency stop, foot brake Tilting work table: Enables angled cuts with high accuracy. Fgjdpfowri I Iox Ad Ied Incl. 3 new saw blades

Condition: new, Year of construction: 2026, overall weight: 2,800 kg, rotor diameter: 350 mm, number of blades: 42, total length: 1,460 mm, total height: 1,800 mm, total width: 1,950 mm, rotor length: 620 mm, rotor width: 350 mm, power: 35 kW (47.59 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens Fgodpfxeyyun As Ad Ijd • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, Year of construction: 2016, machine/vehicle number: 985-7, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, FOR SALE — STETON P90C Hydraulic Hot Press Manufacturer: STETON s.r.l., Italy Model: P90C Year: 2016 Condition: Used, good working order Technical Specifications: Platen (pressing) area: 3000 × 1300 mm Press type: Hydraulic hot press Number of cylinders: 6 × Ø 70 mm Vwm Total pressing capacity: approx. 90–100 tons Vwm Cylinder stroke: 450 mm Frame: electro-welded steel profiles; balanced platen movement via racks, toothed wheels and guides DirectIndustry Heated platens with pipe coils for fluid circulation, mounted on machined surfaces with insulating panels to prevent heat loss; platens coated with aluminium sheet DirectIndustry Max. opening between platens: 450 mm DirectIndustry CE certified Typical applications: Veneering of chipboard and MDF panels, plywood laminating, hollow-core door production, furniture panel surfacing. Fjdpfjy Uibtjx Ad Isgd Location: Estonia, EU. Export possible. Loading and transport by arrangement.

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation Fgsdpfew E E Evox Ad Ijd * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Condition: new, Year of construction: 2026, functionality: fully functional, Details Condition : New Control Unit : OSAI Linear Motion System : PMI Automatic Centering : PYNOMATIC SYSTEM SMC Spindle Motor : ELTE Spindle Motor 7,5 kW MAX. Part Width :1200 X 1000 mm | MAX Part Height 600 mm Engine Power : 24kW Z Axis Weight Balancing Systm: Ø50 Pneumatic Cylinder B Axis : Infinite Movement C Axis : Axis Rotation Range ± 400 X Axis : Speed 40.000 mm/min Y-V Axis : Speed 40.000 mm/min Z Axis : Speed 40.000 mm/min Z Axis : OSAI 1.8 kW Servo Motor With Absolute Encoder and Brake X Axis : OSAI 1.3 kW Servo Motor With Absolute Encoder Y Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder Fgodpfx Aezi Smrjd Ied V Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder A Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder C Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Fgodeiiywzopfx Ad Ied Connection cable with CEE plug with base frame, integrated suction and brake Also other models available from stock! Inquire about the current stock.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, pressing force: 44 t, Equipment: CE marking, documentation/manual, safety light barrier, For Sale: Cone TC15 CNC Press Brake (1600mm / 44T) High-Precision, Compact, and User-Friendly Bending Solution Upgrade your sheet metal production with the reliable and efficient Cone TC15 CNC Press Brake. Equipped with an advanced 15" touchscreen controller and full multi-axis automation, this machine is engineered to deliver exceptional precision, fast setup times, and maximum workshop productivity. Whether you are processing simple brackets or complex high-precision profiles, the Cone TC15 offers the perfect balance of power, a compact footprint, and modern technology. Key Features & Capabilities: Fjdpfx Aozi N N Rsd Iegd Intuitive TC15 15" Touchscreen Interface: Large, crystal-clear user interface that makes programming seamless, quick, and efficient. Easy for New Operators: Designed with simplicity in mind—perfectly suited for experienced fabricators while allowing new users to become productive with minimal training. 2D Bending Simulation & Collision Visualization: Visualize the bending sequence in 2D before execution to ensure accuracy. Advanced safety features visually warn about potential collisions between the workpiece, tools, or machine frame. Advanced Multi-Axis Control: Full automatic control over X, R, Z1, and Z2 axes for complex bending geometries and maximum flexibility. Direct Angle Programming: Program directly in degrees for quick, uncomplicated adjustments on the fly. Smart Calculations & Tool Library: Built-in material and bending force calculation optimizes the required tonnage based on material thickness and type, extending tool life. Includes a comprehensive tool library for fast setups. Seamless Connectivity: Equipped with a USB port for easy program backup/loading and an Ethernet network interface for effortless factory integration. Integrated Production Counter: Built-in part counter keeps track of your batch volumes accurately. Technical Specifications: Control System: Cone TC15 (15" Touchscreen) Bending Length: 1600 mm Pressing Force: 44 Tons Backgauge Stroke: 600 mm Machine Dimensions (L x W x H): 2230 x 1550 x 2150 mm Machine Weight: 3000 kg Why Choose the Cone TC15? Thanks to its rigid design and advanced 4-axis backgauge (X, R, Z1, Z2), this machine ensures unmatched repeatability. Its compact dimensions make it an ideal fit for workshops looking to maximize their floor space without compromising on bending capacity or modern CNC features. Contact us today for more information, pricing, or to schedule a demonstration!

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Fgjdpfx Aou T Hhkod Iod Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Fodpfx Aexnm Rcod Ijgd Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: ready for operation (used), Year of construction: 2024, operating hours: 235 h, controller manufacturer: FANUC, This PALMARY PCB-4520-3 centerless grinding machine was manufactured in 2024. It features a workpiece diameter capacity of Ø8–60 mm and a maximum workpiece length of 150 mm. The machine includes an automatic unloading attachment and adjustable speed for enhanced efficiency. If you are looking to get high-quality grinding capabilities, consider the PALMARY PCB-4520-3 machine we have for sale. Contact us for further details. Standard Features • Maximum Grinding Diameter: Ø60 mm • Regulating Wheel Speed: 30 rpm • Grinding Wheel Speed: 1,200 rpm (max. 45 m/s) • Grinding Processes: Infeed Grinding and Throughfeed Grinding • Integrated Dressers: 2 • FANUC CNC Control System • Adjustment Cart and Flange • Grinding Wheel and Flange • Standard Stopping Type Grinding Table Fgjdpfx Aszhmunod Ijd • Stopping Type Blade • Diamond Dresser (2 pcs/set) • Main Axis Lubricating Device • Pilot Lamp Optional Equipment • Paper Filter (80 L/min with 260 L Tank) • Magnetic Coolant Separator (80 L/min) • Grinding Wheel Inverter (15 HP) • Fully Enclosed Splash Guard • Jib Crane for Grinding Wheel Change (PCB-45) • Vibration Meter for Manual Grinding Wheel Balancing (KINIK KGB-2010) • Throughfeed Table for Small Diameters (Ø8–38 mm) • Throughfeed Table for Large Diameters (Ø35–60 mm) • Automatic Unloading Attachment (Throughfeed Grinding) • Adjustable Speed • Workpiece Diameter Capacity: Ø8–60 mm • Maximum Workpiece Length: 150 mm • Additional Infeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Additional Throughfeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Spare Flange for Adjustment Cart and Adjustment Wheel Additional Information • Machine has no CE Certificate

Condition: excellent (used), Asecos Extraction system Weighing workstation with fresh air curtain Airflow testing according to DIN EN 14175-3 (5.4.4) Compliance with the prescribed workplace exposure limits Construction made of fine steel sheet with chemically resistant, plastic coating Vibration-free mounting option for an analytical balance on the granite block, which is separated from the hazardous substance workstation No scattering of the weighing material due to the fresh air curtain in the front area External dimensions (W x H x D): 1200 x 1300 x 850 mm Internal dimensions (W x H x D): 1180 x 1260 x 500 mm Fsdpezhmrmefx Ad Ijgd Condition: used Scope of delivery: (Asecos extraction system) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.