Used Can Baler for sale (292)

Condition: excellent (used), Machine: Used Lindemann Sobod 8 Metal Baler Bale size: 400mm x 400mm Specifications: see table Dcedpfjxrz S Ajx Ab Tsr Status: ready to use Condition: in very good maintenance condition Year of manufacture: unknown Power: electric Availability: March/April 2025

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Dedpfeh Nyfyjx Ab Tecr Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. If you have any questions, please contact us at 539 660 495.

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Dedpfxox D U N Se Ab Tscr Model: HL 4010 Year of manufacture: 2012

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Dedpfsx Dnb Uox Ab Tocr Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Baler Avermann, Model AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Specifications: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (L x W x H) Machine weight: approx. 18,000 kg Remarks: Dcjdpfjx Dkkxsx Ab Tor The press is still in operation and can be inspected upon request. It is expected to be available from February 2026. A suitable WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional images available upon request. Please feel free to contact us. Please note: All technical data are based on manufacturer’s information. We do not accept liability for any errors or omissions in the provided specifications. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, prepaid, without guarantee or warranty.

Year of construction: 2020, operating hours: 2,630 h, condition: used, Serial number: 5298xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21972 Specifications: Manufactured in 2020 Dcedpfjx Dg Uyex Ab Ter Operating hours: approx. 2,630 Bale counter: approx. 12,710 45 kW 400 V Channel dimensions: 1,100 x 750 mm Conveyor belt in good condition Press force: 65 tons Description:Well-maintained Mac 106/2 baler.It is well suited for plastic, cardboard and paper, but also works for waste.The conveyor belt is in good condition.The Mac 106/2 comes in two bale sizes; this machine has the smaller format at 1,100 x 750 mm.Ready for delivery. Hours: 2630 Own weight: 111 Model: 106/2 Ballepresse

Condition: used, Year of construction: 1991, power: 3 kW (4.08 HP), For sale or rent! We are offering an HSM 155VL vertical baler. Manufacturer: HSM Model: 155VL Year of manufacture: 1991 Motor power: 3.5 kW Dsdpfex Dldgox Ab Tjcr

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Driving Power 50 KW Djdpfx Abjltinws Tscr Arrangement Surface 7,5 x 7,2 m x m Machine weight 29 to Press box aperture1,9 x 0,95 mxm Place: Germany Available immediately

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Model: VK 20/1200 Motor: 11 kW Final bale size: 700 x 800 mm Dcodpexnzf Ijfx Ab Tor Bale weight: 200–350 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Dcsdpfx Aex A U Ncob Tor Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Vertical baler HSM VL 600, year of manufacture 2002 Technical data: Manufacturer: HSM Model: HSM VL 600 Year of manufacture: 2002 Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Dodox A Ur Depfx Ab Tocr Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Machine weight: 3575 kg Materials: Paper, cardboard, film Note: The operating manual is available. Please note: All technical data is based on manufacturer specifications. We do not accept liability for the accuracy of the information provided or for any possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), pressing force: 25 t, Equipment: documentation/manual, Tested, cleaned, full service performed. Fully equipped, ready to use! Dcjdpex Alctofx Ab Tor

Condition: used, Year of construction: 1992, pressing force: 30 t, power: 15 kW (20.39 HP), AFFORDABLE BALER FOR SALE WITH DEFECT! Technical Specifications: Manufacturer: Homa Model: BP3000P Year of Manufacture: 1992 Filling Opening: 1050 x 820 mm (L x W) Drive Power: 15 kW Pressing Force: 30 t Settings: Horizontal, fully automatic Bale Size: 800 x 900 mm Dcsdpfx Ajx Dlc Ajb Tjr Bale Weight: ~300 kg Machine Weight: approx. 5,650 kg Defect – Oil has leaked from the system; water may have entered the system! PRICE: EUR 5,500 (EXW Lithuania, Vilnius)

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Dedpfxslhqd Rj Ab Tocr Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm x 80 cm deep x 55 cm high Condition: Very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a quote with no obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on delivering efficient solutions in the areas of internal transportation, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for deployment in various sectors. See our advertisements for: waste balers for efficient waste management, electric pallet trucks/stackers for fast and safe internal transport, scrubbers for thorough and professional floor cleaning, forklifts in various designs suitable for different working environments. Dedpfx Abox Af Nte Tjcr With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly have the right machine at your disposal. Visit our location You are very welcome to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne, Netherlands. Visits are possible by appointment, so we can take the time to inform you thoroughly and show you the right machines. Contact Do you have questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you further. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baling Press Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2014 Drive: 30 kW Pressing force: 50 t Operating hours: 7,145 Filling opening: 1,600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 20 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles The press is in good condition and has been inspected and tested. A video can be found on our YouTube channel or our website. Note: The press has been overhauled. The knives, counter-knives, and all sliding plastics have been replaced. Please note: All technical data are based on the manufacturer's information. We assume no liability for the information provided or for possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Dodjxzz U Aopfx Ab Tjcr Inspections are possible by appointment. Sale is ex-works, prepayment only, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 5 t, Equipment: documentation/manual, Fully equipped, ready to use! Works perfectly. Dcjdpfx Absx Alb No Ter

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE OR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Specifications: Manufacturer: HSM Model: HSM 500 VL Pressing Force: 54–540 kN Bale Size: 1200 x 800 x 1200 mm Bale Weight: approx. 500 kg Dcodpfxsx Dlb Eo Ab Tor Max. Bale Size: approx. 1200 x 800 x 1200 mm (W x D x H) Press Chamber Dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of Manufacture: 2005 PRICE ON REQUEST!

Condition: used, Year of construction: 2003, functionality: fully functional, Baling Press Presto CC 13 V, Year of Manufacture 2003 Technical Specifications: Manufacturer: Presto Model: CC 13 V Year of Manufacture: 2003 Pressing Force: 13 t Cycle Time: 24 s Drive Power: 4 kW Feed Opening: 780 x 750 mm Feed Volume: 0.39 m³ Dsdpfxow Tyxlj Ab Tecr Binding: triple, automatic Throughput at bulk density of 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale Dimensions: 700 x 750 mm Bale Weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine Weight: approx. 1,900 kg Materials: paper, cardboard, film The press is in good condition and has been function tested. Please note: All technical data is based on manufacturer specifications. We do not assume any liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Viewing by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: used, Year of construction: 2002, pressing force: 115 t, power: 150 kW (203.94 HP), For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Model: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Djdpex Dlanofx Ab Tscr Pressing force: 115 t Settings: horizontal, fully automatic Bale weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST!

Condition: good (used), Year of construction: 2013, functionality: fully functional, Bale Press Dixi 60 SLS, Year of Manufacture 2013 Dcsdpjxyga Iofx Ab Tjr Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370-450 kg Tying: triple manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The operating manual and EC Declaration of Conformity are available in German. Please note: All technical data is based on manufacturer information. We do not assume liability for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex works, against prepayment, without warranty or guarantee.

Condition: used, Year of construction: 1995, pressing force: 85 t, power: 170 kW (231.14 HP), BALER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Model: Konti 425C Year of manufacture: 1995 Feed opening: 102 x 175 cm Drive power: 170 kW Compression force: 85 t Settings: Horizontal, fully automatic Dcedpsx Dk Ttefx Ab Tjr Bale weight: 500-650 kg Press weight: 25 t PRICE ON REQUEST!

Condition: good (used), Year of construction: 2016, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture 2016 Dcsdexygauspfx Ab Ter Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2016 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The operating manual and EC Declaration of Conformity are available in German. Please note: All technical specifications are based on manufacturer information. We do not accept any liability for the details provided or for potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by prior appointment. Sale is ex-works against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 2008, power: 3 kW (4.08 HP), The HSM V-Press 610 is a powerful baler designed for medium to large volumes of waste, making it ideal for commercial and industrial use. This model combines high capacity, efficiency, and reliability, allowing for the effective compaction of a wide range of waste materials. Pressing force: 120 kN Drive power: 3 kW Filling height: 655 mm Dedpfx Abox Dk Tgj Tocr Filling opening (width x height): 800 x 495 mm Bale length x bale width x bale height: 800 x 600 x 600 mm Bale weight: 100 kg Dimensions (W x D x H): 1198 x 823 x 1986 mm Weight: 540 kg Related product line: V-Press Consumables: Strapping Compression materials: Plastic film, mixed paper, cardboard, punching waste! PRICE ON REQUEST!

Condition: used, Year of construction: 1994, pressing force: 40 t, power: 22 kW (29.91 HP), Horizontal Baler for SALE/RENT BAUER 300 The baler is in good working condition (previously used in a print shop)! Technical specifications: Dcsdpfex Dk S Asx Ab Ter Installation of secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Pressing force: 40-50 t Dimensions of the baler: 10,300 x 2,000 x 3,000 mm Tipping weight: approx. 400 kg PRICE ON REQUEST!