Used Balancer for sale (834)

Condition: good (used), functionality: fully functional, 2 Pcs. “Steinert NES 200 220 E 5009” for Sale Manufacturer: Steinert Lodsxb Tbzopfx Ahvori Type: NES 200 220 E 5009 Belt widthness: 2.000 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: good (used), functionality: fully functional, “Steinert NES 125 220 E 5009” for Sale Lrjdpfx Aexb S Exjhvei Manufacturer: Steinert Type: NES 125 220 E 5009 Belt widthness: 1.250 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened Lsdpfx Aheywcl Rovjri by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm Ljdpfx Ahoyv Iqvevsri 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Lrodpfxsvlnvrs Ahvei

Condition: used, Year of construction: 2000, machine/vehicle number: LC590, Pieralisi Used Complete Line Jumbo 3 2000 for oil production - 3 tons per hourTechnical Specifications & Performance DataThis second hand complete oil production line is engineered for continuous olive oil extraction with industrial reliability and efficiency. Designed and manufactured by Pieralisi, the JUMBO 3 configuration delivers consistent throughput for food-grade processing and can be integrated downstream with bottling equipment for industrial packaging operations.Manufacturer: PieralisiModel: JUMBO 3Production capacity: 3 tons per hourApplication: Edible oil extraction and clarificationLine composition: Leaf remover, washer, crusher, malaxers (7 units total), decanter, separator, conveyorsYear of manufacture: 2000Configuration: Complete process line, suitable for integration with a used bottling line for final packagingAdvanced Automation & Control SystemsThe Pieralisi JUMBO 3 platform is known for robust process control across extraction stages. The line supports synchronized operation from fruit preparation through separation, ensuring stable throughput and repeatable quality. Quick adjustments on the malaxers and decanter support optimization for different olive batches and temperatures.Process-stage synchronization for steady 3 t/h throughputAdjustable malaxing parameters for yield and quality optimizationConsistent separation and clarification via decanter and final separatorOperator-friendly controls supporting safe and reliable operationProduction Line Integration CapabilitiesEngineered as a complete process solution, this second hand line interfaces easily with upstream fruit intake and downstream industrial packaging or bottling equipment. Conveyors enable smooth material handling between stages, while modular elements facilitate format and process adjustments.Inline integration with depitting, storage, and bottling/packaging linesConveyor-based transfers between preparation, malaxing, and separationFlexible setup for edible oil production workflowsMachine Condition & Maintenance HistoryThe complete line has been dismantled and stored. Components are complete as listed, ready for inspection and recommissioning at the new site.Operational status: dismantled and in storageComplete core components included as listedOperational Performance & VersatilityWith a 3 tons per hour capacity, the line delivers stable performance across critical stages of oil extraction. The seven malaxers provide thermal and residence-time flexibility to balance yield and flavor profile. The decanter and final separator ensure efficient solids-liquid separation and product clarity suitable for edible oil standards.High-throughput crusher feeding multiple malaxersSeven malaxers: 2 double and 3 single units (7 malaxing sections total)Decanter centrifuge for primary separationFinal separator for polishing and clarityInstallation Requirements & S... Lredpfx Ahjyhb Aujvsi

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, PalletizerSterilization: Autoclave by SBMOperation status: In productionAdvanced Automation & Control SystemsThe line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities.Production Line Integration CapabilitiesAs a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps.Machine Condition & Maintenance HistoryThe line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation.Operational Performance & VersatilityDesigned for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, ... Lodjydpa Topfx Ahveri

Condition: used, machine/vehicle number: LC595, Used complete isobaric glass line for wine - 2000BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling and combines proven European packaging machinery for efficient beverage production. It integrates a filling machine, wirehooder, pasteurizer, case sealer, and auxiliary equipment to support end-to-end industrial packaging operations. Ideal for second hand acquisition, the line offers reliable performance with CE-marked components and a balanced mix of capacities for medium-scale beverage production.Containers: Designed for Glass bottle handlingKey equipment and models: cobert SUPREMA filling machine; ROBINO & GALANDRINO VITTORIA 83 wirehooder; RIVI Engineering mesh pasteurizer 1P; SIAT SM11-S case sealer; OMAC lobe pump; FACCIO G. cork orienterComponent years: 1986 (wirehooder), 1993 (pasteurizer), 2007 (case sealer), 2008 (cork orienter)Pasteurizer capacity indicator: Mesh area 6.5 m²Electrical data (case sealer): 380/415V, 50Hz, 3PH, 1.08A, 260WCompliance: CE markings on componentsAdvanced Automation & Control SystemsThe line is equipped with independent control panels per machine for flexible operation and maintenance. The SIAT SM11-S case sealer features three-phase power and fixed speed controls suited for consistent end-of-line sealing. Emergency stop controls and illuminated indicators are present on operator stations, supporting safe and efficient operation. Quick adjustments on the case sealer and dedicated orienting controls on the cork orienter streamline format setup.Power architecture: Three-phase systems on end-of-line case sealerHMI/controls: Dedicated operator panels on each machineSafety: Emergency stop devices and CE-compliant guardsProduction Line Integration CapabilitiesConfigured for inline operation, the equipment set provides a coherent flow from filling and closure application through thermal treatment and carton sealing. The wirehooder interfaces downstream of bottle closure for sparkling applications, while the pasteurizer integrates within the thermal treatment step. End-of-line case sealing allows seamless integration with upstream conveyors and pack handling.Inline integration between filling, closure application, pasteurization, and case handlingAuxiliary lobe pump supports product transfer and utility circulationCork orienter enhances closure logistics and line ergonomicsMachine Condition & Maintenance HistoryThe line comprises robust, industry-standard machinery known for long service life and maintainability. Components display CE compliance and typical operator safety features. Offered as a second hand configuration, it is presented as ready for operation subject to standard installation, commissioning, and routine checks according to manufacturer guidelines.Operational Performance & VersatilityDesigned for glass bottle beverage production, the equipment supports core processes including filling, wirehood application, thermal pasteurization, and secondary pack... Lrjdpfx Ahjyhb Ahjvsi

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Used aseptic line for tretra pack fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Fino Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments.Production Line Integration CapabilitiesThis used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations.Machine Condition & Maintenance HistoryThe equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment.Operational Performance & VersatilityOptimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics.Installation Requirements & Site PreparationThe system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environme... Lsdpsyh E Apofx Ahvori

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V Ledpfx Aev Dg A Uehveri

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm Lsdpfxsdibw Aj Ahvsri min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm Lodpfx Ajyvlxdshvjri RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator extends on-shelf convenience, while the TCP70 case packer con... Lrsdpfxeyvilzs Ahvei

Condition: used, This listing is for the Sartorius YDP20-OCE Printerr Lredpfx Ahoywywdovsi The unit is in full working condition and is ready for immediate use The Sartorius YDP20-OCE printer provides reliable documentation for your weighing data. Direct-from-lab surplus in original condition, it ensures seamless integration with Sartorius balances for GLP-compliant reporting. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech • Condition: Direct-from-Bench - Original • Power-On Test: Verified • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..: This Sartorius YDP20-OCE printer provides reliable documentation for your weighing data. Direct-from-lab surplus in original condition, it ensures seamless integration with Sartorius balances for GLP-compliant reporting

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Lrsdpfjywuqrsx Ahvoi Total air requirement: 224.0 m³/min

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS band saw Type BSB 600 Stand in modern steel construction, table top thick-walled, high ribbed cast iron massive grey cast iron band saw frames technology: - upper and lower PANHANS band saw blade guide APA II - finely planed cast iron table - swivelling table top up to 20 - dynamically balanced band saw blades with vulcanized rubber bandages - fence ruler can be used to the left of the saw blade - Fence profile can be folded down - blade tension indicator - mechanical height adjustment by hand wheel with locking pinion Ljdpfxsbzmb Hj Ahveri - automatic motor brake with main switch and motor protection switch technical data: - max. cutting height 380 mm - max. cutting width 570 mm - table size (BT) 590 x 810 mm - table height 905 mm - wheel-Ø 600 mm - engine power 2,2 kW - wheel speed 820 rpm - max. saw band length 4710 mm - suction nozzle-Ø 2 x 100 mm - machine weight 272 kg - machine size (LBH) 1120 x 750 x 2125 mm Location: ex stock Bitburg Top exhibition price Freely loaded

Condition: new, Year of construction: 2025, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design Ljdpfx Aer Igzcohvjri torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Lrjdpfox Twdyox Ahvsi

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Lredpfxsx Twcve Ahvoi

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · Travel distance X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm The basic frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, making it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the secret to permanent precision and stability. The layout of the machine allows the operator an optimal workflow while requiring minimal floor space. The resulting frame provides a balanced and secure base for the machining unit with outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on prismatically ground guides via recirculating ball carriages. The machining unit, in turn, is mounted to the mobile carrier using prismatic, ground rails and recirculating ball carriages. Description of aggregates and accessories (basic configuration) Lrsdpfxjx Twcce Ahvoi Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting Grooving saw unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Includes: 4 tool holders (right), without collets R8L Tool changer Automatic tool changing system for 8 tools. Moves along with the rear aggregate carrier for quick tool access. · Number of tool slots: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Adapter for 1 angle gearbox · Travels in X direction Horizontal milling unit (position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collet 3–20 mm (ER 32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / 50 mm bore) · Motor power: 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Worktable The worktable is designed to provide the operator with maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of the workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · The retractable reference stops are CNC-controlled · Pendulum operation standard (2 working fields) --- other clamping systems optional --- Axis movement The drive system for X, Y, and Z axes uses ground recirculating ball screws of the highest precision class. The recirculating ball drive...

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Lastek Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Ledpoywgptefx Ahvsri Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC Ljdeywgpaopfx Ahvsri 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO18 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Lsdpfxoywgnvo Ahveri We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2001, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed speed 5-24 m/min. Weinig Profimat 26 S Four-Sided Planer ..... Summary: - 5 spindles (bottom, right, left, top, bottom) - Common control of the right spindle (axial), top spindle (axial), and glass bead discharge. - Working width (with a 125 mm tool circle) 20 - 230 mm - Working height (with a 125 mm tool circle) 8 - 120 mm Detailed description: 1. SPINDLE ..... - First lower horizontal spindle - Motor with brake 5.5 kW - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 125 - 145 mm - Axial travel 5 mm - Rebating device - Hardened table insert in front of the 1st lower spindle 2. SPINDLE ..... - First right vertical spindle - Motor with brake 7.5 kW Shared motor with left vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 15 mm below table level 100 - 200 mm - Tool circle 40 mm below table level 100 - 180 mm - Max. tool diameter behind stop level 180 mm - Max. groove depth 35 mm - Axial travel 40 mm - Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment 125 mm 3. SPINDLE ..... - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool swing circle 15 mm below table level 100 - 200 mm - Tool swing circle 40 mm below table level 100 - 180 mm - Max. Tool diameter behind stop plane 180 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Insert segment 125 mm 4. SPINDLE ..... -First upper horizontal spindle -Motor with brake 7.5 kW -Diameter 40 mm -Speed ??6,000 rpm -Tool swing circle 112 - 200 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Upper horizontal spindle pneumatically controlled axially (40 mm) via selector switch, Max. saw diameter 200 mm -Split pressure shoe in front of upper spindle, adjustable to the tool swing circle and pivoting away from the tool, spring-loaded. - Pneumatically adjustable up/down glazing bead discharge to the upper spindle Ljdpfx Ahsyuzczsveri 5. SPINDLE ..... - Second lower horizontal spindle - Motor with brake 4.0 kW - Diameter 40 mm - Speed ??6,000 rpm - Tooling circle 112 - 200 mm - Maximum groove depth 15 mm All groove spindles dynamically balanced for high concentricity Common control of the right spindle (axial), upper spindle (axial) and glazing bead discharge FEED SYSTEM ..... - Mechanical feed, infinitely variable 5 - 24 m/min. With brake – 2.2 kW -Feed roller in front of the first lower tool, pneumatically controlled "up-down" -Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning -Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm MACHINE ELECTRICAL TECHNOLOGY ..... -Operating voltage 400 volts (voltage range 380–420 volts), 50 Hz -Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1 Other electrical regulations are not c...

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Ledpfx Ahjyuw Srjveri Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.