Used Balancer for sale (769)

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. The housing is designed to be robust and chemical-resistant for tough lab environments. Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Bwsdpfoxrt N Hjx Acyow Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm Bwedpfxeh St Azo Acysw MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Bwjdoxpyinepfx Acyjw Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bwsdpfx Acevvkipoysw

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic built-in balancing head, SN:O14LW1379, unused, 100% functional, scope of delivery as per photos Bwodpfxsi D Upvj Acyjw

Condition: good (used), functionality: fully functional, power: 128 kW (174.03 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 9.5 l/h, fuel tank capacity: 190 l, color: yellow, overall weight: 12,760 kg, maximum load weight: 4,645 kg, lifting power: 4,645 kg/m, lifting height: 3,950 mm, tire size: 20.5 R25, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro4, shovel volume: 3 m³, Year of construction: 2017, operating hours: 2,200 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, gripper hydraulics, head guard, hydraulics, low noise, onboard computer, standard shovel, === KEY SPECIFICATIONS === Year: 2017 Operating hours: 2,200 h Operating weight: 12,760 kg Max tipping load: 4,645 kg (80 % of tipping moment) Bucket capacity: 1.9 m³ Transmission: Hydrostatic / Automatic Drive: 4x4 Differential lock: Automatic Quick coupler: Yes (CAT Fusion Quick Coupler) Cab: Enclosed with A/C and heating Heated cabin: Yes Air conditioning: Yes Tyres: 20.5 R25 radial / industrial Engine: Caterpillar C7.1 ACERT Stage IV Power: 114 kW (155 HP) Emission class: Stage IV (EU) / Tier 4 Final (US) Hydraulic flow: 150 l/min (main implement pump) CE certification: Yes === HIGHLIGHTS === Powerful and fuel-efficient wheel loader with high productivity Comfortable and quiet cab with excellent visibility and full climate control Fusion quick coupler for versatile attachments and fast loading CE-certified and ready for immediate use === CONDITION === Very good condition – fully checked and tested by certified technicians. 2,200 operating hours, recently serviced, ready for work. Inspection available upon request. === LOCATION & DELIVERY === 📍 Located in Sittard, the Netherlands 🚚 Worldwide delivery available 💰 Price on request (EXW / excluding VAT) Bwsdpfx Aoxctx Ajcyjw The CAT 926M wheel loader delivers a perfect balance of power, precision and efficiency. Equipped with a C7.1 ACERT engine (114 kW / 155 HP) and advanced hydraulics, it is ideal for construction, recycling and industrial applications. Fully CE-certified, inspected and available from Collé Rental & Sales stock for immediate delivery. === DELIVERY === Crane loading available on request. All transport handled professionally by the Collé Rental & Sales logistics team.

Condition: used, This listing is for 1 of 3 Sartorius Practum513-1S Laboratory Balances The unit is in full working condition and is ready for immediate release. The Practum series is described by Sartorius as offering “best value for your money, without compromises in precision and reliability.” The model 513‑1S is one of the higher‑capacity versions of the Practum range: a capacity of 510 g, with a readability (resolution) of 0.001 g (i.e., ±1 mg) for that capacity. It uses the typical features of the Practum line: rugged housing (aluminium die‑cast base and ABS housing) and technology built for standard applications. Connectivity: has a Mini‑USB interface for outputting data to a PC or compatible printer. Weigh‑below hook capability (for e.g., hanging weights beneath the balance) is supported. A front level bubble and adjustable feet support easy leveling, which improves accuracy and repeatability. Bwodpfxoxrt Nto Acyjw Mechanical overload protection is built in to help ensure durability. The Practum 513‑1S is well‑suited for standard analytical/precision weighing tasks in laboratories where you need to weigh up to ~ 510 g with 1 mg resolution. Typical use‑cases: formulation work, general sample weighing, quality control, density determination, routine laboratory tasks. The documentation mentions modes like counting, percent weighing, averaging and “unstable conditions” for the broader series. Because of its resolution and capacity, it's a good fit when you don’t need ultra‑fine microgram resolution but need relatively high capacity with milligram resolution.

Condition: used, Year of construction: 2002, MAIN APPLICATIONS - Spot welding - Press tending - Material handling - Machine tending - Palletizing - Assembly High performance industrial robot The 6-axis IRB 6400 manipulator and S4Cplus robot controller provide short and precise cycle times, rapid change-overs and consistently high process precision. IRB 6400 accounts for one third of the 90,000 ABB robot installations. The family of 6400 robots consists of different arm variants and payload categories which are controlled by the advanced dynamic model based control function, QuickMove™, always ensuring the highest acceleration, path accuracy and speed over the entire working envelope. Adaptability IRB 6400 is designed to be compact with a small interference radius to ensure flexible installations in areas with high density of production equipment. The process media, which is integrated through the robot base is easily exchanged and changing from a 2.5 to 3 meter overarm takes less than 30 minutes. The robot can be calibrated one axis at a time to ensure a quick return to full production. Reliability and safety IRB 6400 features robust all-steel construction with high material strength. The arms are mechanically balanced and equipped with double bearings. Advanced motion control and collision detection option greatly reduce the risk of tool and workpiece damage, making this a highly reliable and safe robot. Type: IRB6400RM2000 Robotversion: IRB6400R/3.0-100 Serial number: 64-24036 Date of manufacturing: 2002 Net weight: 350 kg Power: 8,3 KVA Bsdpfxexrcvpe Acyjww Voltage: 3x400 V Frequency: 50-60 Hz Handling capacity: 100 kg

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Model: CVS-1240 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,200 x 4,000 mm Production Capacity: 70 – 95 t/h Motor Power: 7.5 / 11 kW Weight: 7,400 – 8,000 kg Model: CVS-1640 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,600 x 4,000 mm Production Capacity: 100 – 130 t/h Motor Power: 11 / 15 kW Weight: 13,500 – 14,750 kg Model: CVS-1650 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,600 x 5,000 mm Production Capacity: 130 – 160 t/h Motor Power: 11 / 15 / 18.5 kW Weight: 14,000 – 15,500 kg Bedjxpvq Uspfx Acyeww Model: CVS-1850 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,800 x 5,000 mm Production Capacity: 140 – 180 t/h Motor Power: 11 / 15 / 18.5 kW Weight: 16,000 – 17,500 kg Model: CVS-2050 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 5,000 mm Production Capacity: 170 – 220 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 16,500 – 18,200 kg Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Model: CVS-2470 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,400 x 7,000 mm Production Capacity: 268.8 – 336 t/h Motor Power: 2x15 / 2x18.5 / 2x22 kW Weight: 20,500 – 24,000 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Bwjdjvvi Nzopfx Acyow

Condition: new, Balance Systems 9NDRAEA0046000 SN:B512867 ,unused in opened original box, 100% functional, scope of delivery according to photos Bwodpei D T A Rofx Acysw

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 189830 € 3587.79 € 2000 mm 730 mm 2000 x 600 mm 2x 1000 x 600 mm 2100 mm 5 - 30 m/min 0 - 2250 mm/min mm 685 mm 0 - 675 mm/min 0.001 - 0.04 mm 560 mm 500 - 2200 1/min 11 kW 5.5 kW 6225 mm 07 mm 2305 mm 6530 × 00 ×3350 (brutto mm 10200 kg Bwjdpfx Acsxpizmoyew 1600 kg 1150 kg 1600 kg Dm. 405 x 75 x 127 mm je 3,1 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed 30 m/min Integrated machine body temperature control Turbide-coated double V-guides Hydraulic table drive with cooling Linear guides with recirculating ball screws and AC motors for precise positioning in the X and Z axes Automatic lubrication with a pressure switch for automatic stop in case of pressure drop Electro-magnetic chuck 2x 1000 x 600 mm Coolant system with automatic paper filter and magnetic separator (500 l) Automatic dressing device mounted on the table, without diamond, with automatic compensation Grinding wheel flange with 1 grinding wheel Grinding wheel balancing stand LED machine light Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH OPTIONS: Complete enclosure of the work area Oil mist extraction

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Spindle length 120,320,125 mm weight 2500 kg loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Bodpfx Acoxpi Eljyjww Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: as good as new (ex-display), Year of construction: 2021, 7-axis Romer arm with 1,200,000 points per second laser RS6 head, 2.5m measuring range. Complete with tripod, remote control, pcdmis software. It is a fantastic machine with automatic weight balancing. High productivity and accuracy with excellent ability to scan on any surface. Bwjdpfx Aceipq Ivsyjw Software available upon request: included PCDMIS CAD++ with MESH option.

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bsdpfxexpvkhj Acysww Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bedjvvi N Iepfx Acysww

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic built-in balancing head, SN:O14LW1381, unused in opened original packaging, 100% functional, scope of delivery as per photos Bedpfxoi D Upye Acyoww

Year of construction: 2024, condition: ready for operation (used), This MIRECS EasyLift was manufactured in 2024. It features a stable base plate for secure anchoring, a Demag Chain Hoist DCBS with a balancer for precise load handling, and a load capacity of 150 KG. The vertical stroke reaches up to 1,500 mm with a total height of 3,000 mm. Ideal for stationary applications requiring robust and precise lifting solutions. Contact us for more information about this machine. Bodpsxn Uw Rsfx Acyjww Application Types Other Automation Equipment

Condition: used, Year of construction: 1992, The Heidelberg MOZ-S is a sheet-fed offset printing press produced in 1992, known for its reliability and high-quality output. Designed to handle sheets up to 480 x 650 mm, this press has accumulated approximately 42 million impressions over its lifetime, demonstrating both durability and consistent performance. Currently located in a printshop in Germany, the machine is in excellent condition and free from any damage, reflecting careful maintenance throughout its use. It is equipped with an Alcolor Dampening system for precise ink-water balance, a CP Tronic control system for advanced automation and ease of operation, and a Stream feeder for efficient paper handling. The press comes complete with all original tools and manuals, making it ready for immediate use in a professional printing environment. Format: 480 x 650 mm Equipment: Alcolor Dampening CP Tronic Stream feeder Bjdpfx Acow Saw Esyeww Machine is in good condition without damages All tools and manuals Two colours Straight machine machine

Condition: like new (used), Year of construction: 2022, operating hours: 140 h, functionality: fully functional, The Mark-8 press is a single-cylinder C-frame press with independent individual tables. Features: Single-column press, C-frame type. 12 metal tables, 1 ridge table, 2 base tables, 4 crossbow tables, 4 dovetail tenon tables, 1 dovetail tenon table. Individual tables with electromagnetic adjustment. Bjdsxqryzspfx Acyjww Balancing system with integrated hydraulic unit, moving along an IPN beam. Advantages: Simplicity and cost-effectiveness Ergonomics in operation Capability of manufacturing large farmhouse elements. Optional integration of ejectors possible.

Condition: new, functionality: fully functional, Year of construction: 2025, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Bodpfxoxpvh Ts Acyoww Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Bodpovvi Rfsfx Acyjww

Condition: new, Balance Systems 9SGJ025A050200 Digitally operated balancing head, SN:B512879, unused in opened original packaging, 100% functional, scope of delivery as per photos Bwjdpfji D T Dnjx Acyow

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Bjdpfsvvi Scex Acysww

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Bedsw Aifzopfx Acyeww