Used Balancing Arbor for sale (1,268)

Condition: used, color: other, Empty weight: 3 kg Hjdpfx Aspz I Dusfiofn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 3 kg Hjdpsphniuofx Afiofn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 2 kg Hfodpenvfivjfx Afijn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: good (used), Hand screw press, mandrel press, spindle press, hand spindle press, mandrel press, rack and pinion press, workshop press -Arbor press. Rack and pinion press, solid design Hedpfsxni Hyex Afijfn -Projection: 210 mm -Height: min 35 mm / max 350 mm -Dimensions: 435/230/H550 mm -Weight: 51 kg

Condition: used, Year of construction: 2004, Technical details: balancing body max.: 2000 kg balancing body diameter w/o machining unit: 1500 mm bed length: 3000 mm swing diameter: 2400 über Maschinenbett mm rotor-shaft: Ø 1500 über Bandantreb voltage: 400 / 50 V/Hz drive power: 22 kw connected load: 25 kVA / 20 kW compressed air: 6 bar Hfodpfx Aeu Iczrjfijn Weight approx.: ca. 5,5 t dimension machine xH: 3,3 x 1,5 x 2,0 m dimensions electric cabinet: 650 x 610 x 2150 mm Horizontal balancing machine, functional see video, dismantled, ready for loading ex Leipzig. The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Drive block/balancing speed: 5-speed and reverse gear (manual gearbox) max. 80 rpm; 160 rpm; 290 rpm; 470 rpm; 630 rpm. incl. PCX measuring electronics Measuring method force-measuring Measuring range of the electronics Speed 60 to 30,000 rpm. Bearing journal Ø 40 - 178mm / 140 - 445mm 2 base bodies (cast steel body), storage length between the bearing pedestals up to approx. 3000mm, adjustment with hand ratchet via toothed rack, with extension 1500mm 2 bearing pedestals/swing bearing blocks: Center height 1200mm measured in bed; 2x rollers Ø 195 x 56mm; 2x rollers; center distance 205mm; adjustment travel 350mm vertical *

Condition: good (used), Year of construction: 2015, Lot consists of: (1) CNC Crankshaft Control Balancing Machine Position consists of: (1) CNC crankshaft control balancing machine Technical Details/Technical Details: English: max crankshaft length 800mm, max dia 300/200mm, max weight 50kg, bearing dia 30 - 80mm, balancing speed 200-650 rpm, 230V 50Hz, LxWxH,:1.3x1x1.5m Parts Gantry System and/or Cranes are not included in the scope. Hfsdpfx Afowg A Sieisn German: Maximum crankshaft length 800mm, maximum diameter 300/200mm, maximum weight 50kg, bearing diameter 30-80mm, balancing speed 200-650 rpm, 230V 50Hz, LxWxH: 1.3x1x1.5m Parts gantry system and/or cranes are not included in delivery.

Year of construction: 2018, condition: used, Cemb ZB 300 TC/GV Horizontal Balancing Machine, Capacity Weight 3kg to 300kg, Max Rotor Diameter 1000mm, Distance between Support Bearings 180 - 1050mm. S/No. 307554 (2018) - CE Mark Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Hfjdpoxnl Tisfx Afisn Please Note: Dismantling and Loading will be carried out by our own supplier. More information to follow...

Condition: used, grinding wheel weight max. 20 kg grinding wheel diameter 320 mm grinding wheel width max. 140 mm range L-W-H 0,41 x 0,27 x 0,36 mm weight 4,9 / 9,7 kg Hfedpow T Tvwsfx Afijn balancing scales Hofmann NG-1, Test pin length 178 mm, spigot 15 mm diameter. Machine dealer with own stock of 1600 m² and certification of the database "Machineseeker".

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Hfedpoxllcljfx Afisn

Condition: excellent (used), Year of construction: 2021, ★ TOP maintained machine from the liquidation of a renowned toolmaker – be sure to check our other listings as well ★ ❗Balancing system for tool holders SK 40 & HSK-A63, grinding wheels, and rotors HAIMER TD 1002❗ Year of manufacture: 2021 Machine number: 13214203 Condition: Used Delivery terms: Free loaded on truck – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – Items must be collected by the buyer during week 49 / 2025 without exception. The exact date will be specified by us. Earlier collection may be possible by arrangement. Payment terms: Advance payment – bank transfer Internal number: JO15 Technical data (without guarantee): - Adapter for SK 40 & HSK-A63 tool holders - Spindle speed: 600 – 1100 rpm Hjdpfexl Tw Dsx Afisfn - Measuring accuracy: < 1.0 gmm - Power supply: 230 / 50–60 V / Hz - Power: 0.4 kW - Compressed air: 6 bar - Max. tool length: 360 mm - Max. tool diameter: Ø 340 mm - Max. tool weight: 15 kg - Further technical data – see images Scope of delivery: - Available manuals - Adapter for SK 40 & HSK-A63 tool holders Dimensions & weights: - Installation dimensions (L x W x H): approx. 1000 x 1000 x 1500 mm - Weight: approx. 220 kg If you have any questions or wish to arrange a viewing, please do not hesitate to contact us. ⚠️Be sure to check our other listings as well⚠️ Additional notes: - We explicitly recommend collection by direct transport (freight forwarding) - The goods are sold excluding any warranty - Technical data provided without guarantee - Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 1998, Technical details: Hedpfx Afsw Uir Deisfn balancing body max.: 3000 kg balancing body diameter w/o machining unit: 1600 mm balancing body diameter with machining unit: - mnm Bearing journal Ø: 15 - 120 / 120 - 240 mm distance of bearings: 2750 mm balancing body diameter: 160 - 350 mm roll diameter: 20 - 120 mm Balancing revolution per minute: ca. 100-1000 U/min bed length: 3000 mm voltage: 400/50 V/Hz drive power: 15 kw accuracy +/-: 0,01 g/mm dimensions electric cabinet: 1200 x 1900 x 500 mm temperature range: 5-35 °C Protection class: IP 54 electrics - voltage/frequency: 400 / 50 V/Hz rated current: 36 A control voltage: 24 V dimension machine xH: 4,10 x 1,20 x 1,40 m Weight approx.: - t The hard-mounted horizontal machine TIRA K3000G is universally applicable and is suitable for balancing roller-shaped rotors with their own shaft journals and disc-shaped rotors with auxiliary shafts. The machine is designed for high-precision measurements and for a wide range of rotors. *

Condition: new, Cardan shaft balancing machine BVI-03-74 Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Hfsdpfxjpbv Tfj Afien Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Year of construction: 2015, condition: as good as new (ex-display), Slip-on mandrel Make Goblet unused in wooden box Hfjdpsfgwlzefx Afisn for shell end mills No. 1115 driving rings : size 27 / 32 / 40 mm Weight 10 kg Age estimated

Condition: good (used), Technical data of the shim: Manufacturer: Bito (M) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 150 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 120 mm Hfodpfx Afsi Hkngsijn Weight: approx. 0.46 kg | pcs.

Condition: new, Technical data: Pressing pressure max.: 5000 kg Projection: 315 mm Installation height: 800 mm Stroke: 530 mm Height: 1650 mm Punch thickness: 56 mm Hfjdpfjuxpwnjx Afisn Table surface: 250 x 360 mm Recess in the table: 85 x 125 mm Turntable with 4 slots: ø 237 mm Weight, approx.: 145 kg

Year of construction: 2024, condition: as good as new (ex-display), Rim Balancing Machine: - Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck - Automatic brake and wheel positioning - Fast balancing cycle time - Made of well-known brands heavy duty components - Fast tool changeover time Hsdpfot Tuqbox Afijfn - Servomotor as a spindle drive motor

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Hodpeic Rn Uofx Afiofn Type 200-20 machine no. 117/6 stroke 200 mm pressure force 20 t spindle diameter 60 mm

Condition: new, PAK-1 Unbalance Measuring Unit is designed to modernize your balancing machine. A balancing machine has a long mechanical life, but prolonged use leads to gradual failure of electronics and measuring instruments, causing problems with spare parts and lack of technical support. Minimize downtime and ensure the reliability of your balancing machine by upgrading it with a new advanced measuring unit. The PAK-1 unbalance measuring unit works in all balancing machines of most existing designs and manufacturers. Confidence in results and ease of use: Easy to set up and work with, our devices do not require any special theoretical knowledge. Wide range of functions for your balancing machine: The use of modern microprocessor technology and many years of experience of our developers allows us to implement functions that were previously unavailable to other manufacturers. Your machine complies with ISO 21940: Balancing machines equipped with the PAK-1 unbalance measuring unit fully meet the precision requirements of modern standards. HIGHLIGHTS • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. INCLUDES: 1) vibration sensor signal processing unit, 2) fanless industrial computer with touch screen, 3) new vibration and speed sensors, 4) metal protected cable set. SEQUENCE OF WORKS for modernization of the measuring unit - Replacement of the existing measuring system with the balancing complex PAK-1 based on an industrial computer; - Installation of new vibration sensors and rotor speed sensor - Replacement of all connecting cables; - Adjustment of the measuring unit on the balancing machine; - Training of personnel with skills to operate the machine. VTM GROUP offers to upgrade your balancing machine. We repair and modernise various old balancing machines of all types from all manufacturers. It's cost effective. An alternative to buying a new balancing machine in 95% of cases. Urgent. Work can be done at customer site within 1-2 days. New components for modernization of your machine: • Installation of new measuring system and vibration and speed sensors. • Installation of new electrical equipment • Manufacturing or repair of the rotation drive • Manufacturing of new rollers Hjdpfx Afsq Ttn Dsiefn Every business is different. Let's discuss your task. We can offer a solution for any balancing machine. Please contact us to get the best offer! 👇

Condition: good (used), Technical data of the shim: Manufacturer: Polypal Included in delivery: 01x shim, used Total width: approx. 130 mm total depth: approx. 85 mm material thickness: approx. 1,50 mm Drill hole Ø: approx. 15 mm Hsdsi Hkm Uopfx Afiofn number of drill holes: 2 pcs. Weight: approx. 0.12 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | pcs. Hfodpji Hknyefx Afien

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 110 mm Hfedpfxei Hknvo Afijn Weight: approx. 0.41 kg | pcs.

Condition: good (used), Included in delivery: Hsdpsi Hkncjfx Afijfn 01x shim, used Total width: approx. 135 mm total depth: approx. 130 mm material thickness: approx. 1,50 mm Hole spacing (center - center hole): 45 mm Weight: approx. 0,19 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm Hfedpfji Hkn Djx Afion material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized Hsdpfx Afji Hkn Ieiefn total width: approx. 120 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 95 mm Weight: approx. 0.14 kg | pcs.

Condition: good (used), Technical data of the shim: Manufacturer: Bito (M) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 150 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 120 mm Hfjdpji Hknkofx Afijn Weight: approx. 0.18 kg | pcs.