Vertical baler, garbage press, mobile waste press, paper press
N328v
-Press chamber: with stainless steel container for big bags
-Press: pneumatically driven
-Corpus: completely made of stainless steel
-Press: for cardboard boxes, tin cans and other bulky and voluminous waste
-Width: the filling opening 1240 mm
-Height: the filling opening 520 mm
-Press chamber width: 1200 x 800 mm
-Container height: 1300 mm
-Container width: 980 mm
-Container length: 1130 mm
-max pressing...
Greenbank B50 vertical baler
Used machinery, after technical review in working order (we have 5 machines of this type on stock).
Dzlytu7by
Price: 3500 euros (net price)
Technical details:
Pressing power: 50 tonnes
Inlet size: 1200 x 565 mm
Bale size: 1200 x 800 x 1100 mm
Bale weight: 400-550 kg (depends on the type of waste)
Empty cycle time: 26 seconds
Motor: 5.5 kW
Power supply: 3x400V 50Hz 16A
Dimensions of the machine: 1880 x 1330 x 3110 mm
Machine weight: 1800 kg
Automatic ejection of ...
- 5,5 kW, 400V
- automatic bale ejection
- pressing force: 30to
- dimensions baler (WxDxH): approx. 162 x 125 x 292 cm
- transport height: approx. 215 cm
- weight: approx.
- Size of the feed opening (WxH): approx. 109 x 57 cm
Brf9vpr7j2
- Bale size: approx. 120 x 80 x 100 cm
- Bale weight: approx. 300-400 kg (depending on the compressed material)
Vertical baler
Pressing pressure 5 to
Press box dimensions 700 x 500 x 940 mm
Feed opening 700 x 600 mm
Brfuhz9ghq
Max. bale size bale size 700 x 500 x 450 mm
Bale weight approx. 30 - 50 kg, depending on material
Motor 1,5 kW, 380 V, 50 Hz
External dimensions W 840 x D 720 x H 2070 mm
filling height approx. 500 mm
weight approx. 320 kg
Machine is overhauled
This listing is for a 2005 HSM VL 500.2 Vertical Baler.
Machine Weight: 2300kg
Dgmjt9h
Pressing Power: 540kn
Compression Time 43s
Bale Size: 1200x1100x1100-1200mm
Bale Weight (Cardboard): 420-450kg
Motor Power: 4kw
Stock Code: BFPT044
Press force (t) 16
Power supply 3×230/400V 50Hz 25/16A
Motor (kW) 4.0
Noise level (dB) 75-79
Cycle time (sec) 30
Dimensions WxDxH (mm) 2500 x 1130 x 1380
Nxp87
Weight (kg) 1580
Filling opening WxH (mm) 1100 x 700
Filling height (mm) 1380
Stroke (mm) 650
Bale size WxDxH (mm) 1100 x 700 x 800
Bale weight cardboard approx (kg) 140-250
Producer: HSM
Typ: 45 VL
Presskraft: 5 t
Anschluss: 400 V
Td7vswij
Ballengroesse: ca. 70 x 50, h 45 cm
Masse: 75 x 85, h 210 cm
- 5,5 kW, 400V
- automatic bale ejection
- pressing force: 16to
- dimensions baler (WxDxH): approx. 158 x 95 x 195 cm
- weight: 1150kg
- size of filling opening (WxH): approx. 110 x 60 cm
- Bale size: approx. 110 x 80 x 70 cm
Brf9mrouq7
- Bale weight: approx. 100 - 220 kg (depending on the compressed material)
Vertical baler
pressing pressure 9 to
Press box dimensions W 900 x D 600 x H 1050 mm
filling opening W 900 x H 600 mm
Bale weight approx. 70-120 kg, depending on material
motor 2,2 kW, 380 V, 50 Hz
outer dimensions W 1100 x D 820 x H 2150 mm
filling height 600 mm
Caytvmpk
machine weight approx. 670 kg
stands on rollers
Machine is in overhaul and is offered with warranty.
The pictures from our archive show an identical machine.
The PDF-file with description you can find below.
Qemaausv
We have wide choice of baling machines - please take a look at our another offers!
Loading aperture (W x H): 700 x 500
Press force: 9 ton
Bale size (W x D x H): 800 x 650 x 600
Iwf7buv
Bale weight: 60-80 kg
Machine weight: 750 kg
- 7,5kW, 400V
- automatic bale ejection
- pressing force 50to
- dimensions baler (WxDxH): approx. 177 x 125 x 299 cm
- weight approx. 2100 kg
- size of filling opening (WxH): approx. 120 x 65 cm
- Bale size: approx. 120 x 80 x 120 cm
Owg82
- Bale weight: approx. 300 - 450 kg (depending on the compressed material)
height of machine - 2270 mm
weight of machine - 940 kg
Year of construction - 1994
Motor - 4 kW, 380 V
pressing pressure - 16 to
Bale weight - 110 - 200 kg
Loading opening - 1100 - 590 mm
Ftzztg2
bale binding - 4-fach - vertikal
Output per houer - 4 - 8
exterior dimensions - 1450 x 926 mm
filling space - 1100 - 700 x 1130 mm
In this offer we would like to propose you
VERTICAL BALER RWM 400
Used machine after a general refurbishment
Price: 3500 euro’s (net price)
3 months warranty
0gq8dovu
Technical description:
• Pressure : 25 tonnes
• Inlet size : 698 x 1200 x 800 mm
• Bale weight : +/- 450 kg
• Bale dimensions : 1000 x 1200 x 800 mm
• 1 cycle time : 40 sec.
• Noise level : 75 dB
• Machine weight : 1300 kg
• Power supply (kW-V-Hz) : 11 kW – 400 V – 50 Hz
• Machine dimensions : 3000 x 1707 x 1187 mm
Please ...
Press force 24 t
3 phase 3 x 400V, 50 Hz
Bale size (W x D x H) 1500 x 800 x 1100 mm
Cardboard up to 500 kg
Loading aperture 1500 x 650 mm
Dimensions: (W x D x H) 2105 x 1190 x 3185 mm
Bh8qbot9sb
Dimensions:
Gwjhsc
Width x Depth x Height: 1198 x 823 x 1986 mm
Weight: 540 kg
Loading aperture width x height: 800 x 495 mm
Bale length x Bale width x Bale height: 800 x 600 x 600 mm
Bale weight (up to): 100 Kg
Driving power: 3 kW
Voltage / Frequency: 400 V / 50 Hz
Pressing Force: 24 T
Bale Dimensions: 1200 x 800 x 1000 mm
Bale Weight: up to 450 Kg
Machine Dimensions: 1590 x 1103 x 2994 mm
Feeding Opening: 800 x 500 mm
Motor power: 4.0 kW
Gjp2lz7d
Baler weight: 1440 kg
Dimensions: (W x D x H) 1900 x 1050 x 2481 mm
Loading aperture: 1200 x 600 mm
Press force: 50 t
02ye7og2
Bale size: (W x D x H) 1200 x 800 x 1140 mm
Bale weight: cardboard up to 450 kg
Machine weight: 1520 kg
Operating power: 3 phase, 3 x 400V, 50 Hz
Width x Depth x Height: 1797 x 1070 x 2985 mm
Weight: 1886 kg
Vux2w2e
Loading aperture width x height: 1195 x 650 mm
Bale length x Bale width x Bale height: 1200 x 780 x 1200 mm
Bale weight (up to): 480 kg
Driving power: 4 kW
Voltage / Frequency: 400 V / 50 Hz
DMG Vertical Machine Center
Bexr77si
DMC 835V
Year 2008
Travel X835 Y510 Z 510mm
Spindle 10,000rpm
ATC 20 magazine
Heidenhain iTNC-530 3D DMG ERGOLine – Control
Bt40 Spindle Taper
Coolant – Air Blast Changeover by M-Code
Spray Gun for swarf Removal
Electronic Hand-wheel
Active Chiller for Spindle
Mortising machines Maka Db-6 v Second hand 1977
Make:
Maka
Model:
Db-6 v
Description:
VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL
Nvchn
Year:
1977
3 axis
Condition: not used, 580 hrs
Table dimensions with clamp "T" grooves 1000 x 450 mm
Bsjjdls8xt
Spindle speed 8000 rpm.
X-axis travel 800 mm
Y-axis travel 450 mm
Z axis travel 510 mm
Distance of spindle face - machine level 150-660 mm
Sold without accessories
Serial No. 6959 - 4
Table Size 36" 914mm
Swing 24" 609mm
Height under cross slide 23, 1/2" 596mm
Turret rise & fall 22" 558mm
3gbfopfx
Turret traverse 26" 660mm
Speeds 10.5 - 234 rpm
Feed rate .005 - .234
Input 415/3/50hz 22kW motor
Digital Readout Newall C80
Fitted with 5 way turret, Table jaws, Coolant pump
Length 2500mm
Width 2100mm
Height 2800mm
Nett weight actual. 7,030 Kgs. / 7 Tons.
Closed vertical tank , Make Maschinenbau K Ley und Co KG, No. 5307, Year of construction 1997, Working pressure 0.1 Bar, Capacity 24000 Ltr, Vessel sizes dia.2400mm x6500mm, Dished top , Conical bottom , Manhole dia.500mm, Top connections 420x330mm, dia.150mm, (2x)dia.50mm, Outlet 400x400mm, Max. temperature 60 degr.C., Floorspace 2,8x2,8 M, Total height 7,0 M, Weight 1500 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They a...
• Cutting force: 630 t
• Hold down force: 120 t
• Box closing force: 240 t
• Pusher ram force: 150 t
• Cutting width: 800 mm
• Box length: 6000 mm
• Box width open: 2550 mm
• Box width close: 800x600 mm
• Electrical power: 2 x 90 kW
• Maximum Working Pressure : 315 bar
• Baling Capacity: 15 - 20 t/h (Iron / Steel)
• Shearing Capacity : 12 - 16 t/h (Iron/Steel)
• Weight: 70.000 kg
Bqdc2v33
Table size 1300 x 550 mm.
Movement x-Axis 1050 mm.
y-Axis 510 mm.
z-Axis 510 mm.
Number of tools in magazine 30 pieces.
Maximum spindle speed 40-12000 1/min.
Opdpf
Tool taper DIN 69871A-40.
CNC control Mazatrol Fusion 640 M NEXUS
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
It has the control system of PEN.SCHNEIDER
Pneumatic system is SMC.
It has the ability to process glass in dimensions of 2500X6000mm.
Ytieec
I has the ability to process coated glass (Low-e)
The height over Conveyor belt = 2225 MM
Washing Unit is 304 rustroofed
Water tanks are heated and made up of 304 rustroofed/stainless
Short processing time with double head system
Special design to prevent scratches by the vistue of adjustable rolls
Serial No. 120L729/723739.
Control Heidenhain iTNC 530
Bjhii7z08k
Table size 280mm
Table load 200kg
A Axis +/- 110 degrees
B Axis 360 degrees
X Axis Traverse 700mm
Y Axis Traverse 590mm
Z Axis lTraverse 480mm
Speeds 15000 rpm
Feed rate Rapid 32m/min
Automatic tool changer Yes, Big plus spindle system
Number of tools 32
Tool length 280mm
Tool diameter 88mm or 125mm with adjoining pocket empy
Tool weight 7 kg
Input 400/3/50hz 33kW
Equipment Swarf conveyor, coolant, Hand wheel, Oil cooler
Featu...
Vertical conveyor screw (1x), Make AZO GmbH + Co. Osterburken, Type Trogschnecke TFS-250 Zone 22, No. 2800121, Year of construction 2010, Material Stainless steel, Trough-model , Diameter 250mm, Length 2850mm, Shaft diameter 85mm, Pitch 195mm, Inlet 665x270mm, Outlet dia. 250mm, Motor 4,0 KW, 230/400 Volt (Ex), Screw speed ± 112 Rpm, With covers , Floorspace 3,8x0,5 M, Weight 330 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new....
Very good condition
The machine has worked 10397 hours in automatic mode
Closing force 500 kN
Injection unit according to EUROMAP: 290
Mold height min. 200-300 mm
Opening max. 450-550 mm
Opening stroke max. 250 mm
Hydraulic core tractor 1x
Air valve 2x
Regulation of hot inlets 12x
Screw diameter 35 mm
Max. dose volume, injection 144 cm3
Max. injection capacity 132 g / PS
Max. injection pressure 2000 bar
Machine weight 3400 kg
The injection molding machine does not have a closable nozzle
2r7cqe
I...
With half century of experience, Pi Makina has installed the
B0t7oiug
worlds leading and Turkey’s largest crushing-screening plants and
continues to produce machines that converts the stone to civilization.
Addition to concrete batching plants and concrete pumps, Pi Makina
also provides complete professional solutios such as feeders as
crushers, screens, screws and belt conveyors for the processing of
stones may be used in the end-user facilities.
-----
Pi Makina has been using 4 types of cru...
*** AVAILABLE STRAIGHT AWAY ***
Waste baler
BTS-MF300LH
The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector.
- Bale weight output of up to 340 kg
- Compact and low design with only 1986 mm height
- Suitable for ...
SV 1000 is double headed. It achieves fast and high quality deburring and grinding with its compact, powerful design and user friendly control panel.
Due to its strong and corro- sion resistant construction, the maintenance and spare parts costs are extremely low.
This model also can be presented as a line with our washing machine.
Gixpapz
Deburring & Grinding: This model can perform both deburring and grinding processes.
Low labor cost & energy consumption: Due to servo driven the energy c...
Serial No. 3600482
Control Fanuc 18i - MB
Table size Twin pallet, 1050mm x 550mm each
Longitudinal traverse X Axis 1000mm
Cross traverse Y Axis 600mm
Vertical traverse Z Axis 600mm
Speeds 15,000 rpm variable
Feed rate Variable
Spindle taper ISO 40
Automatic tool changer Yes
Number of tools 48
Tool length 300mm
Tool diameter 88mm or 125mm with adjoining pocket empty
Tool weight 7 kgs
Input 400/3/50hz Spindle motor 22 kW
Fitted with Coolant, swarf conveyor
Bokoqdnebg
Features Fully interlock ...
Vertical conveyor screw (1x), Make Van Beek Screwconveyor Systems Drunen, Type KR-150, No. 250184, Year of construction 1995, Material Stainless steel, Tube-model , Diameter 150mm, Length 4300mm, Shaft diameter 70mm, Pitch 50-130mm, With hopper , Inlet 1220x400mm, Outlet ± dia. 260x120mm (oval), Motor ± 1,5 KW (motor tag is missing), Floorspace 4,7x1,0 M, Weight 390 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are read...
Description will follow shortly.
Bo3cndxljl
If you have any questions please do not hesitate to contact us. We are very pleased about your enquiry.
Manufacturer: Kovosvit MAS a.s. Czech Republic
Table 1500x670 mm, max. table load 1200 kg
Travells, axis:: X = 1270, Y = 610, Z = 720 mm - you can buy in offered price as 3 axis center (but there is also 4th and 5th axis plus price)
Dxmcwa
Feed: working feed X, Y, Z 1-15000 mm.min / 1, rapid traverse 40 mm.min / 1
Total power input of the machine is 55 kVA
Working air pressure 0,6 Mpa
Machine dimensions: LxWxH: 5000x3600x3330 mm
Machine weight 11000 kg
Spindle HSK A63 Kessler, max. speed 18000 m...
Waste Baler
BTS-MF500LH
The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector.
- Bale weight output of up to 500 kg
Y2et7mot
- Compact and low design with only 2249 mm height
- Suitable for baling of cardboard, fi...
Please directly reach us through;
Yusuf Aldırmaz
Export Manager
TESIR MAKINE COMPANY
Description
The turreted HS 500 performs fast and precise drilling by automati- cally changing tools in five different sizes.
In serial production, this model provides great advantage with speed and accuracy, and it reduces the processing costs to a very low level with a single operator.
Suitable for flat and shaped glasses, this model results in low maintenance and spare parts cost due to its strong co...
Serial No. 168256
Control Mazatrol 640M 5X
Capacity 630mm diameter x 500mm height
Table size 600mm x 500mm
Table load 500kg
A Axis -120 / +30 degrees
B Axis 360 degrees / 0.0-01 indexing
Omt37
X Axis Traverse 630mm
Y Axis Traverse 765mm
Z Axis Traverse 510mm
Speeds 12000 rpm Variable
Spindle taper ISO 40
Automatic tool changer Yes
Number of tools 80
Tool length 360mm
Tool diameter 80mm or 125mm with adjoining pocket empty
Tool weight 8kg
Input 380/3/50hz
Fitted with Tool probe,
Equipment...
Make Kaspar Schultz Brauereimaschinenfabrik und Apparatebauanstalt, No. 6512, Year of construction 2010, Material Stainless steel, Working pressure jacket 3 Bar, Number of vertical pressure tanks 1, Mounted on legs , Floorspace 0,7 x 0,7 M, Total height 1,3 M, Weight 100 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld...
Table size 1300 x 550 mm.
Movement x-Axis 1050 mm.
y-Axis 510 mm.
z-Axis 510 mm.
Number of tools in magazine 30 pieces.
Maximum spindle speed 40-12000 1/min.
Bpvpftmoir
Tool taper 40.
CNC control Mazatrol Fusion 640 M NEXUS
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Screw diameter: 30 mm
Screw speed: 20-300 r/m
Max stroke volume: 99 cm3
Max shot weight: 114 g
Dxosma
Closing force: 45 t
Opening path: 200 mm
Ejector force: 2t
Ejector path: 20 mm
Mold installation height min.: 264 mm
Plate spacing max.: 464 mm
Platten size: 860x320 mm
Waster Baler
BTS-MF60
The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle.
- Smallest baler in BTS Waste Recycling Equipment Range
- Produces small and compact bales with bale weight up to 60 kg
- Ideal for locations wh...
New and unused Kasto vertical. Packed with everything that goes.
Orsrp
Technical data please refer to the pictures.
Leicestershire, United Kingdom
(dealership location)