Used Automatic Punching Machine for sale (93,963)

Condition: good (used), Systemate D90 Drum / Thigh Deboner Systemate thigh deboner D90 debones thighs and drumsticks with optimum performance, delivering maximum profitability. D90 thigh deboner is regarded as the industry benchmark for delivering highly efficient production of deboned thigh and drumstick meat. The system is characterized by its simplicity of operation and unsurpassed yield prior to and post trim. Operation One or two operator loads the thigh or drumstick into a the product holder which carries it through a sequence of deboning steps integrated into the carousel mechanism: Crodpfx Ajukd H Hjb Tsk The product is positioned by the probe. The thigh joint is pushed gently through the diaphragm, while the thigh meat, including kneecap remains on the product holder. The bone is released from the diaphragm. The deboned thigh meat, with or without skin, is discharged on a separate location. After deboning, the only remaining operations necessary are trimming and grading. The D90 thigh deboner can mechanically debone anatomical thighs at a maximum capacity of 5.400 products per hour. The thighs are supplied to the stand alone machine by using e.g. a belt conveyor. Year: 1996 Capacity: Up to 5.400 bph Machinedimensions (LxWxH): 290x130x200 cm

Condition: good (used), Year of construction: 1970, Gildemeister 6 spindle automatic lathe AS 32-6 - Spindle stop device Codpfxsrrgr Ao Ab Tjrk - Pick-up device pneum. Accessories against surcharge - Cross hole drilling device - Thread cutting gear - Thread cutting device - optional milling device, cross-cutting device - Saving conveyor Machine was overhauled at the end of the 80s

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Cjdpfx Asudn Utsb Tjrk Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: Crjdpfom Ak Husx Ab Tjk X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 6500 kg Cjdpfx Asxwzx Tob Terk Main Drive Punching force 300 Kn This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 18,300 mm, feed length Y-axis: 1,000 mm, total length: 20,500 mm, drilling capacity: 50 mm, total height: 2,560 mm, total width: 3,500 mm, quill stroke: 330 mm, workpiece weight (max.): 1,088 kg, table width: 1,000 mm, table length: 18,300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Beam Drilling Line Machine Type: Single Spindle CNC Beam Drilling Line Control: Siemens Sinumerik Year: 2005 Condition: Good. Can be viewed running Includes 60ft Table Csdpfou Nyg Usx Ab Tsrk Technical Specification Max Beam Size: 60ft x 40" (18.3m x 1000mm) Max Beam Weight: 730lbs/ft (1088kg/m) Min Drill Diameter: 1/4" (6.5mm) Max Drill Diameter: 2" (50mm) Max Thickness: Up to 10" (250mm) Max Speed X-axis: 120 ft/min (37m/min.) Max Speed Y-axis: 120 ft/min (37m/min.) Spindle Power: 13 3/4hp (10KW) Drilling Feed Rate: 2" – 10" per min (50-254mm/min) infinitely variable Spindle Stroke: 13" (330mm) max Total power: 20 HP (14.9 KW) Power Supply: 400V, 3-ph, 50 Hz Average Output: 200 to 400 holes per hour depending on the profile drilled Approx Floor Space Required: 20.5 x 3.5m Machine Height: 2.56m

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Crsdpfxov D Ezis Ab Tsk Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: used, Year of construction: 1983, grinding length: 710 mm, type of input current: three-phase, Automatic knife grinding machine. Max. grinding length: 710 mm. Grinding motor: 1 kW. Cjdpfxsxytnfe Ab Tsrk

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 Crsdpfxoxwp Nyj Ab Tok - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Automatic packaging machine, sealer SIAT / BRÜNINGHAUS type XL-35-94 / P Carton gluing machine, carton gluing machine, semi-automatic closing machine No. 19084 Year of construction 2004 Carton length 160 mm -any Carton height 120-510 mm Carton width 120-510 mm Mains connection 400 Volt, 50 Hz, 260 Watt - Manual adjustment of the side conveyor belts for the carton width, via hand crank - Carton feed via conveyor belts on the right and left - Manual height adjustment of the upper gluing station, via hand crank - Glues the bottom and top of the carton with 2 separate parcel tape stations Crsdpfxst Exq No Ab Tsk - 2 gluing units for processing self-adhesive tape, width 75 mm, presumably type K12 - Gluing stations for self-adhesive tape (also for large rolls Ø 300 mm) - Height-adjustable feet to adjust the working height Space requirement L x W x H 1150 x 1100 x 1350 mm Weight 185 kg good condition

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Crjdpju Hxmzefx Ab Tok

Condition: good (used), table size: 350x350mm Codjfm A Amopfx Ab Tsrk

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Codjwd Emwepfx Ab Tork Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function Csdpfx Absxmfc Uj Terk - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Csdetvnlbepfx Ab Tjrk Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4413 Measurements depth 5860 mm Measurements height 2263 mm Machine weight 14500 kg Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information. Application Types Crsdpfexv Ez Nex Ab Tsk Punching

Condition: excellent (used), Year of construction: 2018, operating hours: 600 h, functionality: fully functional, feed length X-axis: 7,800 mm, feed length Y-axis: 150 mm, total height: 2,800 mm, pressing force: 60 t, total length: 3,950 mm, total width: 1,635 mm, input frequency: 50 Hz, input voltage: 400 V, For sale is a Lafranconi LM1200 CLASSIC XL SPECIALE, year of manufacture 2018, with only 600 operating hours. The system is in excellent condition and is ideally suited for complex punching and bending processes on wide material cross-sections. The modular design, modern Siemens control, and tool compatibility make this machine extremely flexible and versatile. Crjdsxyav Nepfx Ab Tek

Condition: good (used), Pressure: 25 t Csdsfim Dwepfx Ab Tjrk cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzWf002, Equipment: Android Auto, CE marking, Chips Snacks Vertical Plantain Chips Peanut Nut Packing Rice Popcorn Potato Chips Sachet Packaging Machine .It is suitable for packing all kinds of grain material, sheet material,strip material which such ascandy,sunflower seeds,nuts,beans,potato chips,popcorn,dry fruit,vegetable salad (shreded or slicesvegetables,like iceberg lettuce.,cabbage,spring onion and leek ect.).frozen food.jelly.biscuitchocolate, corn, pet food, hardware and plastic can be weighed by the ration. Credpfjxu Uwqox Ab Tsk

Condition: good (used), Fritsch automatic dough sheeter - used - electronic control Cjdpoxx Tzvefx Ab Tsrk - automatic flour duster - automatic dough winding - serviced - in full working order - collection from warehouse / shipping option available - price on request

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Crjdpfx Asxvv Tveb Tjk Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Cedpfsrknnfsx Ab Tjrk Equipment - Flat, profile, and bar steel shear - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: BX 1103403A, sheet thickness (max.): 3 mm, type of input current: three-phase, Contact us for more information. Codpfx Aowp Aa Seb Terk

Condition: excellent (used), Year of construction: 2016, Professional automatic packaging system from a renowned European manufacturer. Suitable, for example, for packing food products, technical goods, print and paper products, household items and toys, as well as textiles. The machine can be used in various industries such as beverages, food, chemicals, wine & spirits, cosmetics, detergents, wood, textiles, and graphics. It is capable of packaging diverse products including glass and PET bottles, cans, cartons, trays, jars, and boxes of various sizes. The shrink wrap machine is equipped with multiple monitoring sensors, light barriers, and photocells for automatic process control. User-friendly LCD control panel with extensive functions and setting options, such as automatic and setup modes, 20 memory slots for different packaging formats, piece counter, packaging performance calculation, and communication functions. Technical data: - Maximum product dimensions: width up to 760 mm x height up to 380 mm - Suitable for LD-PE film from approx. 20 to 100µm thickness - Maximum film roll width: 750 mm flat film - Packaging performance up to 10 units per minute - Working height approx. 940 to 1100 mm - Motorized unwinding of bottom and top film - Transport rods made of heat-resistant fiberglass - Frequency-controlled shrink tunnel belt with adjustable speed - Adjustable air flows in the tunnel - Cooling fan at the outlet of the shrink tunnel - Conveying rollers for product centering at the machine's outlet - Low energy consumption - Connected load: 3 x 400 V / 50 Hz / 3 phases - Machine dimensions approx. L 2.6 x W 1.3 x H 2.1 to 2.2 m Csdsxxzzkopfx Ab Tjrk - Weight approx. 600 kg The machine was in operation for only a few weeks for a specific order. Afterwards, it was taken out of service and placed in storage.

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Cedpfxoxxzhwo Ab Tsrk