Used Automatic Coating Machine for sale (77,765)

Condition: excellent (used), Numerical Control Type Power Control Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Hodjivawpspfx Agtjfl N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm MACHINE DETAILS Saw motor power: 3.0 kW Hfsdpfxozyccxe Agtol Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Hydraulic cutting pressure control Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Operating manual

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz Hfedpfx Ajupbf Djgtel - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW Hjdov Nq Rtopfx Agtofl weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Hedpfx Agjgk T Ttjtjfl Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Hsdpfezhw Tnox Agtsfl

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch Hfodpodzp T Nofx Agtel - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Hfedpfx Ageh Ayfpetel Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Hedpsi D D A Sofx Agtofl Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: used, Hymmen CombiCoater ELX-S 1400 coating system with UV curing unit. Technical specifications to follow shortly For self-assembly and collection Hfedpfxeztvvls Agtsl

Condition: excellent (used), Strapping machine Mosca RO-M Manufacturer: Mosca Type: RO-M Semi-automatic carton strapping Strap width: 4 to 12 mm Hot wedge welding system Hfodpfxotncc Ue Agtel Adjustable strap tension Control: ecomat 100 Foot pedal for strapping release Table surface: W 640 mm Working height: 830 mm Power supply: 400 V Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Hfedpfx Aou Eviqegtol Gluing System: EVA Hotmelt

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops Hfjdpfx Agelwqrtjtol The CNC controls the movement (Z axe) of all the vertical units

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system Hsdpoxv Sr Ijfx Agtefl In good condition, operated without loader, not under power

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Hfjdpfx Agsfz Nanstel Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Hodpfjidqf Rjx Agtjfl Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hfsdpfx Aezmx Udjgtjl Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.

Condition: used, Die SMIPACK FP 560a ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the SMIPACK FP 560a is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine SMIPACK FP 560a Baujahr / Year 2014 Schweißrahmen 560 x 430mm Produkthöhe / Product high max. 230mm Folienbreite / Foil width max 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Hsdjxp H Udepfx Agtofl Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2013, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Model: Laminating 1110 FA Year: 2013 Technical Specifications Max. sheet size: Width: 1100 mm Min. sheet size: Width: 200 mm /Length: 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Hedpfsxnzm Esx Agtsfl Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air

Condition: good (used), Year of construction: 2003, System with water basin and pumps, Total depth with water basin 1400 mm Hfjdpfot Ah Acex Agtol Total length: 8100 mm, Height: 2500 mm, Working direction: right to left

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal cutting band saw is a high-performance semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulic technology make it an ideal solution for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all machine functions, significantly reducing operating time and improving work ergonomics. Main advantages of the machine Semi-automatic operation – hydraulic lifting and lowering of the saw arm and vice control via the control panel. Worm gear transmission with bronze components – ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min – allows adaptation to various materials and cutting conditions. Carbide blade guides with roller bearings – provide durability and highly accurate blade tracking. Quick-clamping vice – manually or hydraulically operated, with left/right positioning capability. Angular cutting from -45° to +60° – with precise angle reading on the scale. Durable cast iron body – guarantees cutting stability and long machine service life. Hydraulic arm lowering adjustment – allows precise control and setting of the return height. Construction and technology The BS530H model features a reinforced drive system and industrial hydraulic components, ensuring reliable operation even under intensive working conditions. The heavy-duty cast iron body reduces vibrations and provides smooth, consistent performance. The ergonomic control console allows all operations to be managed from a single location. The coolant system integrated into the machine base effectively removes heat and contaminants, protecting the blade from overheating and premature wear. Precision and work efficiency Thanks to stepless speed adjustment, manual or semi-automatic operating modes, and the use of a dial tension gauge for monitoring blade tension, the BS530H metal cutting band saw ensures repeatable results and high cutting quality even during long production runs. Work efficiency is further improved by the front material support roller and the arm locking system, which increases operator safety after completion of the cutting cycle. Applications The machine is designed for: industrial production plants, metalworking workshops, companies performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for serial production, steel fabrication, and preparing components for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Powered blade cleaning brush Coolant system with pump Front material support roller Hedpfx Agjw U Svljtefl Dial blade tension gauge CE declaration and technical documentation (DTR) Optional equipment Additional material guide rollers Semi-Automatic Metal Cutting Band Saw CORMAK BS530H Technical data Parameter Value Working height 965 mm Cutting speed 30–80 m/min Saw blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total motor power 3.0 kW Power supply 400 V Machine dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: good (used), Year of construction: 2008, cross strapping machine with turn table single strap max bundles/min: 40 double strap max bundles/min: 20 cross strapping max bundles/min: 18 bundle width: 200-560 mm bundle length: min 200 mm Hedpfxsg Nzv Uj Agtofl bundle height: 10-440 mm bundle diagonal at cross strapping: max 560 mm Electrical data: 200-440V, 3Ph AC, 50 Hz, 1,5 kW weight: 540 kg

Condition: used, Year of construction: 2013, 3-axis system Max. glass dimensions: 1600 x 2600 mm Hsdjwmqrqspfx Agtjfl Min. glass size: 100 x 350 mm Glass thickness: 3 - 19 mm Hole/double-sided 16 compartments for 16 positions Length: 5850 mm Width: 5500 mm Max. Installation height of the system: 2200 mm

Condition: used, For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Hfodpfxsztv Afe Agtel Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm Hsdpfx Ageh Iy Skotefl - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.