Beam packs buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Retroreflective-10-30V DC 100mA 20-130mm range Price per piece-4x-Available Weight 0.2 kg Clphpm8y more
1
Used crane beam Load capacity: 4 to Length approx. 2 m with 10 attack opportunities on every page Ccybqlbfm Please note also our other offers of used crane traverses from 4 to 40 to! more
6
Beam size: 0 mm Punching capacity: 0 kN Bztcneyi air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg space requirements approx. LxWxH: auf Anfrage m MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: for Schüco alloy window frame,post and beam profiles S65 for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 for Schüco alloy door profiles Royal S65 door base profiles -foot operation - Pneumatic air ... more
5
Numbers of torche:1 Type of gas: workpiece length:24500 mm working dimensions max. (w x h):1200 x 450 mm work height max.:640 mm Number of axles:8 St. internal working area :1000 mm machine weight ab.:5900 kg Weight enclosure:1500 kg machine dimensions (length x width x height):4100 x 5000 x 3300 mm Baktav7q3x chamfer angle max.:45 ° Kaltenbach KC 1200 Coping robot system Kaltenbach KC 1200 [...] 2001 with new software and transportsystem from [...] 2010 The coping line is in very good cond... more
Condition: Cutting capacity: 3100 x 3100 mm luftbedueste machine table top Width stop advancing speed 25 m / min Width stop return 100 m / min E7fvkxycy Pressure beams made of welded steel construction Thrust force adjustable Residual cutting facility in the pressure bar Measurements without contact via magnetic tape system Opening mass of the max. 82 mm collets for Longitudinal and transverse distribution Angle air cushion table and fence 1800, securely mounted 2 Edition air cushio... more
3
maximum capacity load 2,000 kg Cnwzfvui flange width 66 to 220 mm flange thickness 25 mm maximum smallest curve radius 1.15 m manual force at nominal load 7 kg weight approx. 16 kg 20 units on stock - price per unit more
2
Used crane beam, Load capacity: 20 to Length: approx. 5 m 7l2xy7eno Please note also our other offers for used crane traverses from 4 to 40 to! more
6
lifting capacity: 5 t lift: Höhe/height 12000 mm span width: 16300 mm protection class: IP 44 stroke speed: 8 precise lift: 1,5 m/min electrics - voltage/frequency: 380/5 V/Hz weight of the machine ca.: Anfrage t Bk3fe7h3 space requirements of the machine approx.: 16,5x3,4x1,25 m single girder overhead travelling cran RB 5000 with wire rope hoist Balkancar T 0163 MA crane book is available on sale as is! [...] more
5
size of profile - max.:1220 Number of cutting torches: Stck. Cutting system:1 max. length:12000 mm Dvwlrq max. piece weight :6000 kg height of profile:80 mm profile width:mind. 45 mm profile width:max. 600 mm Ficep 1201RC coping robot system for coping of steel profiles, coping system with 6 positioning axis and length measuring system by gripper and 12 m each infeed-/outfeed roller conveyors more


beam packs
every day

New machines via email!

Be informed!
5
We offer Crane truss H-traverse 16 to 3.20 x 2.60 m The plant originates from the assets of insolvent paver of different concrete elements (ceilings, walls, garages and modules). The facility was dismantled on the basis of production of the client and stored in the outdoor area. A function test is possible with the existing gantry crane. The information given here is taken from the existing Dokumetationen. These are incomplete and again to review by experts. Manufacturer: presumab... more
6
Panel saw Casadei SP 45 No. 91-79-007 Length 4500 mm cutting height approx. 90 mm main saw aggregate diameter: 350 mm Before Ritz er diameter: 150 mm Main saw blade motor power: 7,5 KW Rotation speed of main saw blade: 3500 g / min Scoring sawblade speed: 7500 g / min Feed speed of the saw carriage: 12-24 m / min Slide length: 2500 mm Klemmer: 8 pieces Front tables: 3 units Dpimcrf Safety fences: Yes Weight: 3050 kg Location: Machine stands still at the customer and can be stil... more
2
Used crane beam Load capacity: 2 to Length: approx. 3 m 7l2xpl8zn Please note also our other range of used crane beams! more
6
lifting capacity: 5 t lift: - mm span width: no bridge - keine Brücke mm Lifting height: 46 m total power requirement: 16 kW weight of the machine approx.: 1245 kg dimension machine [...]: 1,95 x 1,50 x 0,85 m " only rope travel trolley without bridge" - as good as new / unused - without flor controlled control (crane control) Ytsmvr0v - with undercarriage speed 5 - 20 m /min - lifting speed : main lift 16m/min / precision lift 2,7 m/min - number of strands 4 - classification 2 M - manuals : 1 ... more
5
connected load frequency:380 V numbers of drill spindles:9 Stck. Ssp0yg Profile width:1000 mm Profile height max.:420 (Bohren) mm Profile height max.:440 (Sägen) mm dimensions of saw-blade:1250 mm control voltage:24 V voltage:380 V Peddinghaus LC 1205 - TDK 1000/9 saw drill line for steel construction; circular saw for beam processing with saw blade diameter 1250 mm, incl. mitre cut +45°/-45°, drill line with 9 drill spindles (3 spindles per axis) for beams up to 1000 mm, the beam drill line w... more
5
We offer: Crane beam traverse 16 to 5.80 x 2.20 x 0.5 m with double anchorage points The plant originates from the assets of insolvent paver of different concrete elements (ceilings, walls, garages and modules). The facility was dismantled on the basis of production of the client and stored in the outdoor area. A function test is possible with the available Portal crane. The information given here is taken from the available lists. These are unvolstaendig and again to review by exper... more
1
Beam insulating press SMA-REF-6044 Type: other machinery Manufacturer: Randek Model: Mimipress 3 Year: 2006 Description: Press produces insulated beams fixed by nailplates Working range: Beam dimensions: L: max. 2.700 mm W: 215 - 270 mm H: max. 45 mm Ptfriy Features: 5 press units pneumat. clamping Dimensions: 3.500 x 1.200 mm Condition: ready for action under power Location: Southern Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
5
Retroreflective sensor, sensors, optical-reflective-logistics-output power supply 35 mA voltage 10V to 30V Sensing Distance 700 mm Price per piece-7x-Available Weight 0.2 kg Cvlenyp3 more
2
Crane beam, used (round) Load capacity: 4 to Irmsftrl Length: approx. 3 m Please note also our other used crane traverses from 4 to 40 to lifting capacity! more
4
lifting capacity: 5 t span width: 11900 mm Lifting height: 9000 mm driving speed of crane: ca. 32 m/min Yvojr3u8 driving speed of crane: ca. 20 m/min wheel base: 2400 mm total power requirement: 10 kW weight of the machine ca.: 2,8 t space requirements of the machine approx.: L:12,2 x B:2,9 x H:0,9 m Construction of trolley: Two tracks trolley , which moves on the upper belt of the main carrier Construction of the crane bridge : box girder construction in light metal design Lifting unit: Balca... more
6
New double side planer (Double Surface Planers ) Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom 2qjc0u Latest generation IE-3 motors Spindle and feed brakes CE Top 22 KW Bottom 18.5 KW more
6
We offer from the dissolution of a company. Tube tube of Tamil column 434 x 13 x 0.6 cm with pads The tube were part of a structure for a T-bar roof over a boiler plant. She had to be removed because it is for the disassembly of the system in the way. The construction was anchored on the one hand in the Gebaeudermauerwerk and on the other hand, the construction through 2 pipe support was supported which screwed to the floor or concrete goods Dohfh0bjg Dimensions of the construction:... more
4
Retroreflective type WL24-X2301-Ui Ii 53mA 15.5V 100mW Pi Li Ci 80nF 80uH-Weight 0.5 kg Cxyt9pia more
2
1 used crane beam Load capacity: 40 to Length: approx. 4 m 7l2ycokbp More crane beams available. Please see "Cranes" in our other offerings under "Warehouse" -. more
4
throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar ° weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m Srkjgg space requirements of the machine approx.: 6,61x1,4x2,8 m welding stand for positioning of a welding torch / welding source on big work pieces. inside of the frame is a mechanism installed for adjustment of the gas bottle. diameter of frame = 1480mm jib length with jib length head for intake max./min.: 5760/800mm from column jib ... more
4
We offer from stock ultrasonic through-beam sensor Leuze LSSU 18-S12 2 available LSSU 18-S12 - ultrasonic through-beam transmitter range: 0-065 m Schaltfreqünz 100 Hz voltage: 10 ... 30 V DC connection: round plug, M12, metal, 5 pin factory price: about 225 gross Condition: unused from storage in original packaging with Setup Instructions - see photo Next stocks available in electronic components. Note the offered products: Our house recycled resolutions and assets from bankrupt companies. With... more
5
throat min.: 3000 mm throat max.: 4040 mm Support arm position: 360 schwenkbar/ swiveable ° weight of the machine ca.: ca. 1,5 t S8xlfhaxd space requirements of the machine approx.: L:5,3xH:2,77 m dimensions L x W x H: m welding stand for positioning of a welding torch / welding source on big work pieces. diameter of ground frame/base = 1750x1750mm jib length without additional jib arm: 3000mm with additional jib arm + 1040mm jib position over floor : 2490mm All adjustment have to be processed ... more
2
We offer from stock a disposable ultrasound -Schranke LSEU 18/24 S12 New 2 units available Manufacturer: Leuze Type: LSEU 18 / 24-12 range: 0 650 mm (set in stages) Ultraschallfreqünz: 300 kHz Typ.Oeffnungswinkel: 12 Schaltfreqünz : max. 100Hz Operating Voltage: 10-30V DC Original price: 250 gross state: out of stock - see more photo collections of electronic components available. Note the actual item on offer: Our house recovered assets from resolutions and insolvent companies. With every pur... more
4
We offer: from the stock of a company Sick Through-beam sensor, 4m WS / WE150-P430 transmitter / receiver Manufacturer: Sick name: Thru-beam sensor, DC NPN 4m, M8-4pol. Type: WS / WE150-P430 Package: 1 piece scope of disposable system: transmitter and receiver with time function: NO Rated operating distance: 4000 mm Max operating distance:. 4400 mm Max output current:. 100 mA Number of semiconductor outputs with signaling function: 1 Type of electric connection: connector M8 Design of control ou... more
4
Adjustable traverse, crane beam, truss for pillar jib crane, crane, workplace crane, hoist-Traverse can be recorded with the crane -Tragkraft 300 kg -Adjustable beam for the transport of various loads Yrc9eo -Max traverse recording 1000 mm Transport dimensions h BILZ Weight 54 kg more
1
8jzesgsz8throat min.: mm throat max.: mm Support arm position: ° lifting capacity: 100 kg weight of the machine ca.: 9,0 t dimensions L x W x H: m Sales scope: - 13 rail tracks -welding gantry -2x welding carrier -control panel (Without welding source) available if required more
4
Adjustable traverse, crane beam, truss for pillar jib crane, crane, workplace crane, hoist-Traverse can be recorded with a crane and a truck 2fobbezl -Tragkraft? (undocumented) -Adjustable beam for the transport of various loads -Max traverse recording 2625 mm Transport dimensions 2625/400/H460 mm Weight 130 kg more
5
lifting capacity: 16 : 3M t lift: Gabelstapler, Krane etc. mm span width: - mm travel of hook: 15 m stroke speed /min: 1.3 / 8,0 m/min rope diameter: Ø 14 mm weight of the machine ca.: auf Anfrage t 8c2mukqj3 total power requirement: ca. 20 kW dimensions LxWxH: 3,0 x 1,7 x 1,05 m 2 rail travel trolley of group 3M hoist: - Make Abus, Reeving 8/2, load hook length 500 mm x Ø 150mm with hook securing chasis travel trolley: - make Abus, wheel center dimensions 2500mm, center distance 1220mm, wheel ... more
5
Support claw, sheet metal clamp, sheet metal claw, clamp, sheet metal gripper, material gripper, material gripper Sheet metal claw Clamping width 0-30 mm capacity 2500 kg -1 x clamps available Award pieces Weight 15 kg 89amaa3rc more
4
lifting capacity: 25 : M6 kg lift: - mm span width: - mm travel of hook: 18 7000 mm stroke speed /min: 4,5 m/min rope diameter: 16 mm total power requirement: ca. 23,5 kW weight of the machine ca.: 3,4 t Bhk8jgnq dimensions LxWxH: 3,8 x 2,6 x 1,3 m travel trolley 2 pcs available lifting height 18,7m travel trolley speed 16m/min rope guidance 2 x 2 times fixed more
5
Adjustable traverse, crane beam, truss for pillar jib crane, crane, workplace crane, hoist crane truss claws 3 piece Bpoq8qvh Crane beam claws to the move on the traverse Fixing bracket 220 mm Price complete Dimensions of 335/180/H350 mm Weight 39 kg more
5
Adjustable traverse, crane beam, truss for pillar jib crane, crane, workplace crane, hoist crane truss claws 2 piece Crane beam claws to the move on the traverse Fixing bracket 220 mm Mzc7x Price complete Dimensions of 335/180/H350 mm Weight 26 kg more
6
throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar / swiveable ° weight of the machine ca.: ca. 1,5 t space requirements of the machine approx.: 6,61x1,4x2,8 m dimensions L x W x H: L:5,0xB:1,6xH:2,8 m welding stand for positioning of a welding torch / welding source on big work pieces. diameter of frame = 1480mm S8u090xkw all adjustments have to be proceeded manual. 1 pc available / price per piece more
5
Support claw, sheet metal clamp, sheet metal claw, clamp, sheet metal gripper, material gripper, material gripper 89ainszaw Sheet metal claw Clamping width 0-40 mm capacity 3500 kg -2 x clamps available Award pieces Weight 30 kg more
5
Reflection light beam device Type WT45 P660 -DC 10-60V Dimensions 105/60/H180 mm Weight 0.7 kg Bvbbsgbo more
5
Thru-beam sensor, opto sensor -Art.Nr. 50081336 -10-30 V DC Price per piece-9x-Available Weight 0.1 kg Lidyb more
5
Thru-beam sensor, opto sensor -Art.Nr. 50081336 -10-30 V DC Price per piece-14x-Available Weight 0.1 kg Gtqz3c more
3
Precision bending beam for glass cutting table, glass cutting table, glass cutting machine manufacturer with InnoLas S100-5N type NJ Y123 / 101 -Weight 0.1 kg Rvglrl2py more
6
Beam drill and saw line Complete, disassembled and in our storage. All books and available tools are included. Professionally dismantled, labeled; which make it relatively "easy" to install. Can be loaded. Complete installation at extra cost also possible. Just transport to your location is also possible. Drilling machine: Manufacturer: Wagner Type: WBX1003 Year of construction: 1990 Sawing machine: Manufacturer: Kaltenbach Type: HDM1000 Year of construction: 1990 Baiodkaqvp Includes 30m po... more


beam packs
every day

New machines via email!

Be informed!

to

to

Change search
BEAM PACKS
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close