Used Automatic Coating Machine for sale (74,549)

Condition: good (used), Machine number 20703-14303 Built in 1989 Giodpfsvwkgkex Akwot Size max 320 x 420 mm min 90 x 150 mm Speed max 9000 c/h Number of stitches Standard 11 Power requirements 2,5 kW (220/380V, 50Hz) Air requirement (6 bar) 200 m³/h Length 2530 mm Width 1550 mm Height 1600 mm Weight 2300 kg (approx.)

Condition: good (used), Year: 2005 Equipment size max 320 x 420 mm min 75 x 150 mm Speed max 10800 c/h Number of stitches Standard 11 Godpfx Akevp Rw Tjwjit Power requirements 6 kW (220/380V, 50Hz) Air requirement (6 bar) 200 m³/h Width 2730mm Depth 1800mm Weight 3000 kg (approx.) Equipment fully automatic book sewing machine • automatic feeders • 4 upper and 4 lower signatures opener • computer program • thread cut-off device

Year of construction: 2005, condition: good (used), Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages. YOC: 2005 Type of strapping: single, double strapping max speed for single strap: up to 35 bundles/min max speed for parallel (double) strap: up to 17 bundles/min max bundle dimensions (w x l): ~500 x 600 mm min bundle (package) height: ~10 mm max bundle (package) height: ~400 mm max weight bundle/package: ~25 kg Infeed / outfeed (conveying) height: ~850 mm Continuously adjustable conveyor speed Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: PP No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 190 mm Equipment: - back stop (package stop) - hold-down device - auto. height detection - interface to up-/downstream equipment - auto. strap feeding - auto. strap end detection - auto. strap loop ejection (on "no bundle cycle") Over all length equipment: ~760 mm Over all width equipment: ~1540 mm Over all height equipment: ~1600 mm Input Power: ~2 kVA Voltage: 400 V 3Ph, 50/60 Hz Air requirement: ~8l/cycle; 6 bar Weight: ~415 kg Godsh I Dimopfx Akwoit

Condition: new, - Type of strapping: single in travel direction - max speed for single strap: up to 30 bundles/min - min bundle dimensions (w x l): ~160 x 130 mm - max bundle dimensions (w x l): ~560 x 480 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: 800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: einfach / single - Strap coil dispenser - core width: 165-210 mm - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Over all length equipment: ~840 mm - Over all width equipment: ~1250 mm - Over all height equipment: ~1750 mm - Input Power: ~0,5 kVA - Voltage: 230 VAC, 1Ph, 50 Hz - Air requirement: 2 l/cycle 6 bar - Weight: ~335 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Gjdpfx Akjh Nulcowoit - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic in-line strapping in travel direction without bundle turning behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2006, condition: good (used), Built in: 2009 - Type of strapping: single, double, multiple - max speed for single strap: up to 40 bundles/min - max speed for parallel (double) strap: up to 20 bundles/min - min bundle dimensions (w x l): ~180 x 130 mm - max bundle dimensions (w x l): ~580 x 510 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~20 kg - Infeed / outfeed (conveying) height: ~800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 160/180/200 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~650 mm - Over all width equipment: ~1750 mm - Over all height equipment: ~1950 mm - Input Power: ~1,1 kW - Voltage: 400 VAC, 3Ph, N, PE, 50 Hz - Air requirement: ~8 l/Umreifung 6 bar / ~8 l/cycle 6 bar - Weight: ~500 kg - Operator Manual included as print-out on paper - Optional Equipment: Can be combined with a in-line strapping machine to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions Gedpfx Ash Nuh Sekweit - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2000, condition: good (used), automatic cross strapping machine with turn table single strap max bundles/min: 35 double strap max bundles/min: 17 cross strapping max bundles/min: 15 bundle width: 200-560 mm bundle length: min 200 mm bundle height: 10-440 mm bundle diagonal at cross strapping: max 560 mm Gjdjg Nkf Uspfx Akwjit Electrical data: 200-440V, 3Ph AC, 50 Hz, 1,5 kW weight: 540 kg

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar Giedpfxjh Iy Ske Akwjt - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2008, condition: good (used), Built in 2008 - Type of strapping: single, double, cross - max speed for single strap: up to 40 bundles/min - min bundle dimensions (w x l): ~100 x 100 mm - max bundle dimensions (w x l): ~600 x 600 mm - min bundle (package) height: ~50 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~30 kg - Infeed / outfeed (conveying) height: ~760-890 mm - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: ~200 mm - Strap coil dispenser - core width: ~190 mm Giodpfxoh Nxudo Akwjt - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~600 mm - Over all width equipment: ~970 - Over all height equipment: ~1600 mm - Input Power: ~1kW - Weight: ~200 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic strapping machine. Stand-alone strapper with manual loading of bundles/packages.Foot pedal for strapping cycle start. Moveable, mounted on wheels.

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing Gisdeh Iy Ruspfx Akwot - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2008, condition: good (used), Build in 2008 - Type of strapping: single, double, cross - max speed for single strap: up to 40 bundles/min - min bundle dimensions (w x l): ~100 x 100 mm - max bundle dimensions (w x l): ~600 x 600 mm - min bundle (package) height: ~50 mm - max bundle (package) height: ~600 mm - max weight bundle/package: ~30 kg - Infeed / outfeed (conveying) height: ~760-890 mm - Type of sealing: heat-weld sealing Gijdsh I I Tpopfx Akwet - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: ~200 mm - Strap coil dispenser - core width: ~190 mm - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~600 mm - Over all width equipment: ~970 - Over all height equipment: ~1600 mm - Input Power: ~1kW - Weight: ~200 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic strapping machine. Stand-alone strapper with manual loading of bundles/packages.Foot pedal for strapping cycle start. Moveable, mounted on wheels.

Condition: excellent (used), wire diameter - max. 2,5 mm Gijdpfx Akoyrtwljwot

Condition: excellent (used), wire diameter - max. 2 mm Gedpfx Ajyrhmnokwjit

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW Giedov Nq Rmopfx Akwjt weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: used, Year of construction: 2019, Year: 2019 Condition: operational - Still in production, inspection possible Configuration: - Automatic pallet exchange - When a pallet is completed, the system automatically ejects it to the side output and feeds a new pallet from the infeed track - Automatic sheet feeding and counting - Automatic jogging and aeration - Automatic air removal from the pile - Automatic feeding into the airboard loader - Automatic loading of airboards - Automatic unloading of the pile onto a pallet, including airboards Basic functions of the BASA system: - Automatically loads materials from a pallet Gisdjyv Eppspfx Akwjt - The transport system allows sequential loading from 2 pallets arranged in line; the empty pallet is automatically ejected - Counts / deducts the exact number of sheets - Jogs, aligns, aerates, and presses the piles - Places jogged piles onto separator cardboard - Subsequently separates piles using an airboard - Unloads piles onto a pallet - The BASA system only requires an operator to input or select a job in the system and to supply full pallets and remove empty ones - In off-line mode, the system can “feed” 2–3 cutting machines depending on the material used and pallet loading quality Technical specifications: - Max. format: 770 × 1070 mm - Min. format: 700 × 650 mm - Sheet counter: GTS

Condition: good (used), Year of construction: 2017, dispersion and UV varnishing sheet size min 152x152 mm max 760x760 mm paper thickness 0.1 - 1.2 mm UV varnish dispersion varnish 120 g/m² without surface treatment and higher 150 g/m² with surface treatment and higher 200 g/m² with surface treatment and higher automatic setting time 5 minutes automatic washing time 10 minutes Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes 8.5” x 11” / 215 mm x 280 mm sheets width 12,700 sheets/hour 12” x 18” / 305 mm x 450 mm sheets width 9,900 sheets/hour 14” x 21” / 355 mm / 530 mm sheets width 8,800 sheets/hour 21” x 30” / 530 mm x 750 mm sheets width 6,300 sheets/hour 28” x 40” / 710 mm x 1020 mm sheets width 5,000 sheets/hour Painting speed 4,600 B2/hour anilox rollers for the machine 3;9;12;18 Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes UV drying IR drying (suitable for dispersion varnish and primer for HP Indigo) kit for processing thin materials varnish application using a chamber doctor blade high feeder 2 independent varnish circuits with automatic washing Gijdpfx Asyv Dm Hskwot Anti-Ghost system innovated sheet delivery system

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Godpfx Aksyu Tu Aswsit

Condition: used, Year of construction: 1995, operating hours: 42,416 h, functionality: fully functional, machine/vehicle number: 10317, total height: 3,100 mm, feed length X-axis: 120 mm, ram adjustment: 64 mm, table height: 1,250 mm, pressing force: 50 t, stroke length: 16 mm, stroke adjustment: 51 mm, clearance between the columns: 1,200 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 50 UL, a high-performance stamping press designed for precise and reliable results in series production. The machine is currently integrated into ongoing production and can therefore be viewed and tested under real operating conditions. Inspection and extensive functional testing are possible until the end of calendar week 20/2026. Thanks to continuous use, the machine is in excellent technical condition and ready for immediate operation. All maintenance and servicing work has been carried out regularly and meticulously. Technical data: Rated force: 500 kN Strokes per minute: 100-1120 spm Feeder: BBV 202/120 Adjustable stroke: 16-51 mm Die space / Clamping plate: 760-940 mm Main drive power: 22 kW Power supply: 400 V / 50 Hz Adjustable stroke: 16-51 mm Ram surface: 980 x 420 mm Table surface: 940 x 580 mm Godpfx Ajyu Sn Iekweit Adjustable strip entry height: 50-140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 2700 x 1800 x 3100 mm Weight: 8150 kg "Main drive on (actual running time): 42,416 hours" An acoustic enclosure is available as an option.

Condition: used, Year of construction: 1994, operating hours: 28,067 h, functionality: fully functional, machine/vehicle number: 10000, total height: 3,460 mm, feed length X-axis: 200 mm, ram adjustment: 76 mm, table height: 1,200 mm, total width: 1,750 mm, total length: 1,840 mm, table length: 970 mm, table width: 910 mm, stroke length: 16 mm, stroke adjustment: 63 mm, clearance between the columns: 1,230 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 80H – a proven and powerful high-precision stamping press designed for maximum reliability and accuracy in series production. The machine is currently still in operation and can therefore be inspected and tested under real production conditions. Acceptance and trial runs are possible until calendar week 17/2026. Due to its ongoing use in production, the system is in technically flawless and fully operational condition. Regular maintenance and servicing have been carried out. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Field of application: High-precision stamping for series production Condition: Technically flawless, ready for immediate use Availability: By arrangement / from CW 17/2026 A soundproof cabin is optionally available. Technical details: Gisdpoyu Nipsfx Akwst Nominal force: 800 kN Stroke rate: 100–1000 spm Feed unit: BBV 320/200 Adjustable stroke: 16 – 63 mm Die area / Bolster plate: 970 mm Main drive / Power: 43 kW Power supply: 380 V / 50 Hz Ram surface: 760 x 510 mm Table surface: 950 x 910 mm Adjustable strip entry height: 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: 15,550 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Giedpfxeyu If No Akwet Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, controller model: SIEMENS SIMATIC HMI, saw band length: 5,080 mm, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Belt length: 5,080 mm Material feed height: 1,200 mm Roller diameter: 630 mm Throat depth: 370 mm Giedpfx Aoyng Atekwot Max. cutting height: 320 mm Guide bar (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Belt speed: 250 – 2,000 m/min MACHINE DETAILS Control system: SIEMENS SIMATIC HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Gjdpfx Akjymf Tbewoit Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Year of construction: 2025, condition: new, SEMI AUTOMATIC PASTING MACHINE MODEL; MAGRAFKA-100 YEAR; 2025 Gisdpfjgnlv Djx Akwot

Year of construction: 2019, condition: new, SEMIAUTOMATIC BOOK COVER POSITION MACHINE LJ308A Gsdpfefdzwyox Akwjit -new machine

Condition: used, working width: 250 mm, Brushing Machine / Brushing Automat Manufacturer: Ceetec Gedpfoyuaptox Akwoit Model: A 250 Automatic brushing machine with brush application system Workpiece dimensions: Max. width: 250 mm Max. height: approx. 100 mm Length: from approx. 800 mm The painting machine is suitable for the application of paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical specifications: - Electronic diaphragm pump (no compressed air required) - Spray nozzles for all-round application of wood preservatives - 12 rotating distributor brushes on 8 axes (standard nylon bristles) for four-sided application of coating materials Feed speed adjustable via feed roller, approx. 16-45 m/min. Capacity: approx. 960 – 2,500 meters/hour Power supply: 3 × 380 V EU Machine weight: approx. 350 kg Machine will be cleaned and technically inspected before delivery. All hose connections, the diaphragm, and the set of brushes will be renewed! Delivery time: approx. 3-4 weeks

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Max. panel length: 2500 mm Gijdpoyl Ihxefx Akwst No of injectors: 12