Electric dual screwdriver unit with automatic feed, pneumatic double stroke, mounted on handling dev

BÖLLHOFF / BOSCH REXROTH / JÄGER HANDLING UVS-100-2-R-E / Handy-Flex 300

Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology.

Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E
The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation.

Screwdriver 1 consists of the following components:
- Rexroth type servomotor
- Rexroth type 0 planetary gearbox
- Rexroth type 0 encoder
- Rexroth type 0 straight drive head

Screwdriver 2 consists of the following components:
- Rexroth type servomotor
- Rexroth type 0 planetary gearbox
- Rexroth type 0 encoder
- Rexroth type 0 offset drive head

Dimensions (WxHxD): 165 x 1000 x 200 mm
Pneumatic long stroke: 30 mm
Pneumatic short stroke: 20 mm
Screwdriver spring travel: 20 mm
Last screws used: M6 x 15 mm

Electric screwdriver unit Rexroth
Servomotor Rexroth
Type: EC302 SZ3
Material number: 0
Crsdpfxjfx Hyfe Adkjh
Torque: 0.6 Nm/A
Peak torque: 0.7 Nm
Speed: max. 20,000 rpm
Current draw: max. 7 A
Weight: 0.8 kg

Gearbox unit Rexroth
Type: 3GE27 SZ3
Material No.: 0
Efficiency: 90%
Reduction ratio: i=18.9
Max. torque: 10 Nm
Weight: 0.4 kg
Installation length: 65.5 mm

Encoder Rexroth
Type: 2DMC012 SZ2
Material No.: 0
Nominal torque: 12 Nm
Reduction: 1
Efficiency: 1
Weight: 0.55 kg
Installation length: 118.5 mm

Straight drive head Rexroth
Type: 2GA82 SZ2 1/4"SQ
Material No.: 0
Spring travel: 20 mm
Spring force: 16 - 34 N
Tool holder: 1/4" square
Max. torque: 10 Nm
Reduction: 1
Weight: 0.2 kg
Installation length: 90 mm

Offset drive head Rexroth
Type: 2VNA82 SZ2 1/4"SQ
Material No.: 0
Spring travel: 20 mm
Spring force: 16 - 34 N
Tool holder: 1/4" square
Max. torque: 10 Nm
Reduction: 1
Weight: 0.6 kg
Installation length: 153 mm

Handling system: JÄGER HANDLING
Type: Handy-flex 300
Horizontal movement: 400 mm
Vertical movement: 450 mm
Load capacity: max. 14 kg
Handyflex reach: 250 to 650 mm
Handyflex reach (swung out): max. 860 mm
Swivel radius at full extension: max. 360°
Guide column vertical: Ø 30 mm
Guide columns horizontal: Ø 20 mm
- Balancer for vertical movement
- Adjustable load capacity
- Adjustable stop for limiting swivel radius

Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm
Total weight: approx. 90 kg
Good condition

Without the blue steel pallet as base plate
Blue steel base plate is not included in the scope of delivery.

The listing was translated automatically. Translation errors are possible.