Used Arburg 305 for sale (326)

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Pgedpfxoxqx H Ie Adnjw Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy Pgjdporp Dyrjfx Adnew energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2006, operating hours: 73,000 h, functionality: not functional, clamping force: 500 kN, screw diameter: 30 mm, injection weight: 77 g, Arburg 320C 500-170 Year of manufacture: 09/2006 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen dimensions: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Pgsdpfx Adoxt Uyvonsw Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Injection unit hardened - Bimetal Dimensions: Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pump/Motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW The machine is supplied without a nozzle and requires repair of a card.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,111 h, functionality: fully functional, Manufacturer ARBURG Description 320 C 600 - 250 Serial Number 186245 Pjdpfext Rpyox Adnogw Machine Type ALLROUNDER 320 C Control Version SELOGICA 3.030 Tie Bar Distance 320 x 320 mm Clamping Force 600 kN Injection Unit 1 250 Weight 2,330 kg Delivery Date 27 August 2001 Description Quantity CS - Model Size II 1 0001/000 320 C 600 - 250 1 0006/030 Thermoplastics Cylinder, complete, 35 mm, highly wear-resistant 1 0060/035 SELOGICA User Interface 1 0131/002 Software Version 3.x SELOGICA 1 0131/030 Technology Level 2, servo-regulated with 2 control pumps 1 0132/003 Equipment for processing thermoplastics 1 0135/001 Open nozzle, 35 mm 1 0220/035 Nozzle tip for open nozzle 1 0300/000 Heater band for open nozzle 1 0320/000 Clamping platen set 320, central, 125 mm central diameter 1 0356/011 Sorter unit, longitudinal installation incl. connection 1 0375/000 Programmable conveyor belt in machine base, longitudinal 1 0412/002 euromap robot interface, 32-pin with plug 1 0425/000 Serial interface for printer V24 1 0454/001 OKI dot-matrix printer with serial V24 interface, incl. cable 1 0459/000 3 electric heating control circuits for mould heating 1 0469/003 Low voltage cabinet 400 x 800 1 0500/001 High voltage cabinet 800 x 800 1 0500/004 Shut-off valve for cooling water in supply line 1 1 0501/001 Machine cooling circuits regulated, material feed adjustable 1 0525/002 Software package "Additional monitoring functions" 1 0555/001 Software package "Additional machine movements" 1 0555/002 Software package "Production control" 1 0555/003 Equipment package optimisation / user assistance 1 0555/005 Software package "Quality assurance" 1 0555/006 Software package "Documentation" 1 0555/007

Condition: excellent (used), Year of construction: 2014, operating hours: 32,827 h, functionality: fully functional, machine/vehicle number: 230239, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery trading operations. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Special notice – Tax advantage for used machines As of 01.07.2025, used machines are also eligible for a special depreciation of 30% per year. In addition to the favourable price compared to new machinery, you can claim the same depreciation rates as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Arburg 1500T 2000-400 Rotary Table Vertical Machine Machine no.: 230239 Full equipment details are listed in the downloadable documentation – machine card. Control system: Selogica Year of manufacture: 2014 Total machine cycles: only 1,469,728 Automatic operating hours: 32,827 h Clamping Unit Platen distance: 700 mm Clamping force: 200 t / 2000 kN Mould installation height: 400 mm Table diameter: 1500 mm Rotary angle: 180° Rotation time: min. 2.4 s Permissible load on rotary table: 1,050 kg Ejector force: 45 kN / 175 mm stroke Injection Unit Screw diameter: 40 mm Stroke volume: 201 cc Injection weight: 184 g Injection pressure: 2,000 bar Special Features Pgsdpfx Adeuuf Iaonsw - 2-station, 180° alternating rotary table with servo-electric drive and hydraulic locking pin for precision centering of the rotary plate in end position; separated safety guard between clamping and loading area, adjustable in height on the rotary plate to suit mould base plates, with provision for media lines and connections for mould bases - Rotary table diameter: 1,500 mm - Max. clamping force: 2,000 kN - Injection unit to EUROMAP 400 - Screw diameter: 40 mm - Special ergonomic rotary table design with the following features: o Corrosion protection for the rotary table (VE 574/90) o Water connections: 2 circuits o 3 hydraulic connections for needle valve system o 3 core pulls o Per station: 1 core pull and 2 tempering circuits o 6 mould temperature control circuits o 12-zone mould heating circuits o Kistler cavity pressure sensors (2x) o Temperature query for start-up components Weight: 11,200 kg Power: 22 kW motor – heating capacity: 9.4 kW (5 zones) – rated connection: 100 A The machine is offered after comprehensive functional testing, fully operational with commissioning warranty, and tested prior to dismantling. Further information about our offered machines and our company: - We only sell machines that we have acquired from active production, from our own warehouse in Hannover - All machines are checked and tested before removal - We do NOT sell insolvency assets – we are NOT brokers trading in third-party property - All machines offered come from successful businesses, where regular maintenance and care are standard - All machines offered can be inspected at our warehouse

Condition: used, Year of construction: 2004, clamping force: 130 kN, displacement volume: 230 cm³, injection pressure: 1,670 bar, overall weight: 4,500 kg, load hours: 60,000 h, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Pgsdpfexqhr Tox Adnew delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Pedoxqfi Aopfx Adnjgw Drive : hydraulic Working hours : 138000 h

Condition: excellent (used), A10VSO 100DRS/32R-VPB32UB2, A10VSO 18DFR1/31R-VRA12KB2-S3608, Podpfx Aju Dk Ryednjgw UNIVERSAL HYDRAULIK SSPA-6/136-A-N-R-V0-01 1000001429

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Pgedexpkqispfx Adnew Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, operating hours: 64,000 h, machine/vehicle number: 173960, Description Quantity Pgsdpfoxt Rimex Adnow CS - model size II 1 0001/000 320 C 500 - 100 1 0006/022 Thermoplastics cylinder complete, 30 mm, highly wear-resistant 1 0060/030 SELOGICA user interface 1 0131/002 Technology stage 2 manually adjustable, with 2 pumps 1 0132/012 Open nozzle, 30 mm 1 0220/030 Nozzle tip for open nozzle 1 0300/000 Heater band for open nozzle 1 0320/000 Clamping platen set 320 central, 125 mm central diameter 1 0356/011 Connection for air blow unit 1 1 0361/011 Sorter unit, longitudinal installation, incl. connection 1 0375/000 Pneumatic control core pull 1, incl. pneumatic pressure relief valve 1 0382/004 euromap robot interface, 32-pin, with plug 1 0425/000 Electrical & mechanical preparation for external robot 1 0425/002 Socket combination, 1 CEE, 1 Schuko, additional 1 0444/001 Serial interface for printer V24 1 0454/001 6 electric heating control circuits for mould heating 1 0469/006 Low voltage cabinet 400 x 800 1 0500/001 High voltage cabinet 800 x 800 1 0500/004 Machine-related cooling circuit, manually adjustable 1 0525/001 Software package "Additional monitoring functions" 1 0555/001 Software package "Additional machine movements" 1 0555/002 Software package "Production control" 1 0555/003 Equipment package: optimization / user assistance 1 0555/005 Software package "Quality assurance" 1 0555/006 Software package "Documentation" 1 0555/007 Increased power for heating units 1 990

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Podpew Tt R Ijfx Adnogw Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: used, Year of construction: 2000, operating hours: 144,381 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an injection molding machine of the Arburg brand and type 520 C 2000-675 Technical data Year of construction: 2000 Pedpfx Adou Uuakjnsgw Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Pjdpsxqdxiefx Adnjgw Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Pgedpoxrf Nlefx Adnsw

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), Control Unit Brand HAITIAN This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Pjdpfxsxn Uxho Adnjgw Injection Moulding

Condition: used, Year of construction: 2006, Arburg 470C 1500-350 2K injection moulding machine with Multilift H for sale The machine is operational and in good condition. Pgedpfoxqmbyox Adnow Year of manufacture: 2006 Pump operating hours: approx. 42,000 h Horizontal injection unit 350 (35 mm screw) Vertical injection unit 150 (30 mm screw) The machine can be inspected under power at any time.

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Pgsdoxn Aygspfx Adnsw Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Shot volume: 392 cc Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Clamping unit: Hydraulic Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse

Condition: used, Year of construction: 2013, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 405 cm³, injection pressure: 2,000 bar, injection weight: 397 g, mold height (min.): 300 mm, ejector stroke: 120 mm, opening stroke: 450 mm, type of input current: three-phase, pressing force: 200 t, For sale: Arburg 200T machine in very good condition. Pgjdpfx Adoxqc Atjnew

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Podpfx Aexqdtaodnsgw Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Psdpfxexrf Nrj Adnogw

Condition: good (used), Year of construction: 2002, Arburg 420 C 1000-250 (2002) Working hours : 115600 h Clamping force: 100 t Screw diameter : 30 mm Podjxqczpspfx Adnogw Distance between tie bars : 420 x 420 Shot weight : 100 g Machine weight : 3580 kg

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Pgjdpfxsxqcrzo Adnew Distance between tie bars : 420 x 420 Shot weight : 100 g \+ robot TECHNOMATIC

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Pgodpfxsxl Tp To Adnjw Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Pgodpjxl Hpgefx Adnow Clamping force: 50 t Screw diameter: 25 mm Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Clamping force: 35 ton Pgodpswmqx Refx Adnjw Plate size: 455x455 mm Tie bar distance: 320x320 mm Maximum daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)