Used Angle Drill for sale (11,646)

Condition: excellent (used), Clamping surface: 890 x 425 mm Stop surface: 890 x 385 mm Upper part of the stop surface: 890 x 205 mm Plate thickness: 25 mm Iiedponpxniofx Afijh Thickness stop surface: 30 mm Condition: very good

Condition: excellent (used), CATALOG NO. 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between outer spindles: 610 mm - Spindle spacing: 32 mm - Feed cylinder stroke: 60 mm - Max. length of workpiece: 3,400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, mounted on thread (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6–8 bar Ijdsgq I I Ejpfx Afioih - Dimensions L/W/H: 4600×1180×2200 mm - Weight approx. 1,500 kg Net price: 12,900 PLN Net price: 3,040 EUR depending on exchange rate, 4.25 EUR (Prices may vary with larger fluctuations)

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,650 mm, table load: 6,000 kg, spindle diameter: 125 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,000 rpm, table length: 1,400 mm, table width: 1,525 mm, feed length W-axis: 800 mm, overall weight: 18,000 kg, 1 used table-type boring mill Manufacturer: JUARISTI Model: MDR 125 Year of manufacture: 1986 Control: Heidenhain TNC 155 Table size: 1525 x 1,400 mm Table rotation: 360 degrees Travels X-Y-Z-W: 2,000-1,500-1,650-800 mm Spindle mount: SK 50 Speed range: 7 - 1000 rpm Feed: 0 - 2000 mm/min Rapid traverse: 5,000 mm/min Table rotation: 1 rpm Power connection: 30 kW Weight: 18,000 kg Control cabinet: 2,500 x 750 x 1,700 mm A large quantity of tooling can be purchased additionally. As a rule, the machine is sold without accessories. Isdpfx Afsxg Imisioih

Condition: good (used), functionality: fully functional, Data --- Drilling capacity 40 mm / St. 60 --- Tapping capacity M 33 mm / steel --- Mounting MK 4 --- 18 speeds 35 - 1,800 rpm --- Iijdpfsxdu H Rsx Afijh 5 feeds 0.075 / 0.15 / 0.3 / 0.45 / 0.6 mm/rev --- ----

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also Iiedpfeupxh Nox Afish suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: used, Precise angles and miters from 0° to 46°, with digital display for degree indication Storage location: Ijdpfx Afowhzg Ujijih

Condition: new, functionality: fully functional, Year of construction: 2025, Sharpening device for drill bits made of HSS or any other hard metals, ensuring precise grinding and easy handling. Adjustable tip angle in the 90°–135° range. This model can sharpen drill bits up to 20 mm in diameter. Machine features Precise grinding and convenient handling. Sharpening drill bits with ease. Portability due to its modest dimensions. Fully equipped; with a handle inside the device. Technical data Drill bits diameters capability ø2–20 mm Angle of the tip 90°–135° Iiedpfxovu Abbe Afioh Moc 180 W / 230V Motor speed 4800 rpm Approx. weight 11 kg Dimensions 390 x 175 x 170 mm Default equipment Grinding wheel: 1 CBN (for HSS) 11 ER20 collets: ø 3 - ø 13 mm 6 ER25 collets: ø 14 - ø 20 mm 2 clamping sockets

Condition: excellent (used), CATALOGUE NUMBER 6608 TECHNICAL DATA - number of spindles 21pcs - spacing of extreme spindles 640mm - spindle spacing scale 32mm - max drilling depth 60mm - vertical drilling width 60mm - drilling adjustment up/down and at an angle - right-left drills, mounted with Allen keys - pneumatic clamps 2pcs - table surface dimensions 490x1040mm - height to the table surface 920mm - main engine 2.2kW - working pressure 6-8bar - dimensions l/w/h 2830/1150/1320mm - weight 442kg - German production - original DTR documentation - unpainted - mobile Net price: PLN 7900 Price net: 1850 euros depending on price, 4.25 euros (Prices may vary in case of large fluctuations) Iijdpoh I N Sqefx Afioh

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Isdpfx Aexdh Hqjfioih Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: good (used), Year of construction: 1954, Drill press, drill press, stand drill, pillar drill Iijdpodi Smkjfx Afijh -Table size: 400 mm -spindle taper: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP transmission -Feed: 0.09-0.28 mm/rev -Tachometer: defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad Iedeupxkwspfx Afisih connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: good (used), Suhner Sumatic BEM 20 + Polydrill drilling unit Manufacturer: Suhner Model: Sumatic BEM 20 + Polydrill kW: 2,2 V: 380/220 ; 460/230 A: 5,7/9,8 ; 4,9/8,5 Hz : 50/60 rpm : 940 / 1150 Iiedpfx Ajd Huvqefijh spindle adaptor : 13 mm 25-125 mm double spindle drill head

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Iiedsnccx Hspfx Afioh

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for threaded (screw-on) drill bits - Distance between outermost spindles: 704mm - Distance between spindles: 32mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850mm - Height to table surface: 930mm - Feed cylinder stroke: 70mm - Max drilling diameter: 12mm - Drilling adjustment: vertical/horizontal and at an angle - Drilling unit adjustment: pneumatic - Main motor power: 2×0.75kW - Dimensions (LxWxH): 1270x1330x1350mm - Weight: approx. 700kg ADVANTAGES – Made in Poland – 23 spindles – Head ready for threaded (screw-on) drill bits – Unpainted – DTR technical documentation – Used drilling machine, very good condition Iijdpfx Asw I R Tiofieh Net price: 8,900 PLN Net price: 2,094 EUR (based on 4.25 PLN/EUR exchange rate) (Prices may vary according to exchange rate fluctuations)

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition Iedpoxddwrsfx Afisih

Condition: ready for operation (used), MAS VR4A radial drilling and milling machine Type: VR4A Height adjustment 750 mm Throat 1250 mm Spindle diameter: 80 mm Mounting MC5 Spindle stroke: 300 mm Speed: 2500 rpm Bed: 760 x 1400 mm Dimensions: 225 x 90 x 255 cm LxWxH Weight 3200 kg With separate coolant tank and pump Iisdpfev Nzcajx Afieh

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Iodpfjvn U Adex Afioih Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Year of construction: 1987, condition: not inspected (used), Chuck for workpiece pickup is missing Iisdpfjhaqv Djx Afijh

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Isdpfx Afsxga Tneioih

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation Iodpfx Afoxdc Enjisih - Vertical oscillation stroke - 2 rotation speeds - Worktable: 1180x370mm - Worktable adjustments: up/down, front/back, and angled - Motor: 3kW - Pad – for precision grinding - With fan - Working grinding length on belt: 700mm - Top/bottom cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – With oscillation – With pad – With fan – Set includes cutters for edge joining/chamfering – Suitable for contour and straight grinding – Not painted – Used sander, very good condition Net price: 7500 PLN Net price: 1760 EUR (based on exchange rate 4.25 EUR) (Prices may vary depending on significant currency fluctuations)

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Iiodpfx Afswvzrmsish Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-STRUCTURE) Control and Motors: HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measurement systems, and handwheel) IKZ: Internal coolant supply, 20 bar Iisdpfx Aexc Hphofijh Additional equipment: Tool changer with double gripper, 60 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 measuring probe Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Isdpfx Afjxcyz Roieih Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: like new (used), functionality: fully functional, drilling capacity: 25 mm, Radial Drill Mecof 25 Pr 770 X 25 Drilling Ø 25 Mm.-Arm 770 Mm. Spindle Power 2.5 Hp. Spindle Rotation Speed N. 12; 38 - 1,400 Rpm. Spindle Cone: Cm 4- Ø Spindle 74 Mm. Spindle Stroke 250 Mm.- Max. Working Height 1,110 Mm. Iiodpexf Hu Aofx Afioh Ø Column 200 Mm. Total Weight 1,300 Kg. Complete With: Cube 450 X 320 X 400 Mm. Internal Code: svr 324

Condition: excellent (used), CATALOGUE NUMBER 7567 TECHNICAL DATA Iedpfov H Db Hjx Afioih - automatic strip feeding - 2 pneumatic clamps - unit angle adjustment - pneumatic spindle movement - simultaneous machining of 2 sections - groove depth up to 25mm - strip supports - adjustment of oscillating drill movement - adjustment of feed stroke - automatic stop - inclination from 90 degrees (vertical) to 0 degrees (horizontal) - main engine 1.1kW - oscillation engine 0.75kW - working pressure 6-8 bar - dimensions l/w/h 4020x1150x1400mm - weight about 480kg ADVANTAGES - for window production - oscillation - pneumatic clamps - unpainted - Italian production - used machine, very good condition Net price: PLN 13,900 Net price: EUR 3,270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)