Tsugami NP-32 turning machine
Tsugami Tsugami NP-32

Name: Tsugami Tsugami NP-32
Brand: Tsugami
Price: 4900 EUR
Availability: InStock

EXW ONO plus VAT

€4,900

Year of construction

1992

Condition

Used

Location

Székesfehérvár Hungary

Tsugami NP-32 turning machine Tsugami Tsugami NP-32

Machine data

Machine type:: Tsugami NP-32 turning machine

Manufacturer:: Tsugami

Model:: Tsugami NP-32

Year of construction:: 1992

Condition:: used

Price & Location

EXW ONO plus VAT

€4,900

Location:: Székesfehérvár, 8000 Magyarország

Call

Details about the offer

Listing ID:: A7452194

Update:: 27.03.2026

Description

You can check under power, after scheduling an appointment.
Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár.
TSUGAMI NP-32 CNC Lathe Machine

Machining rangers
Machining diameters 8 to 32 mm
Maximum machining length 210 mm (one stroke)
Maximum hole diameter 20 mm (drill)
Maximum thread diameter M14 (tap)

Slide travel
X1 slide (front slide) 85 mm (80 + 5)
X2 slide (rear slide) 115 mm (110 + 5)
Z1 slide (headstock) 215 mm

Rapid-traverse speed
For X1, X2 and Z1 slides 8m/min

Main spindle
Rotation speed
For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless)
For high-speed cutting (optional) 60 to 8,000 rpm (stepless)
Bore diameter of chuckoperating tube 36 mm
Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis)
C-axis rapid-traverse speed -/60rpm
Spindle-center height 900 mm

Turrets
Number of turrets 2
Number of tool-mounting stations 12 (6 stations x 2)
Number of rotary-tool-mounting stations 12 (all stations on front and rear turret)

Tool sizes
Turning tools 16 (square) x 80 mm
Drill-holder hole diameter 35 mm
Indexing method Random

Rotary-tool spindle speed
For heavy cutting 224 to 2,240 rpm (stepless)
For high-speed cutting 475 to 4,750 rpm (stepless)

Machining rangers
Machining diameters 8 to 32 mm
Maximum machining length 210 mm (one stroke)
Maximum hole diameter 20 mm (drill)
Maximum thread diameter M14 (tap)

Fgodpfx Aoidqvced Iod
Slide travel
X1 slide (front slide) 85 mm (80 + 5)
X2 slide (rear slide) 115 mm (110 + 5)
Z1 slide (headstock) 215 mm

Rapid-traverse speed
For X1, X2 and Z1 slides 8m/min

Main spindle
Rotation speed
For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless)
For high-speed cutting (optional) 60 to 8,000 rpm (stepless)
Bore diameter of chuckoperating tube 36 mm
Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis)
C-axis rapid-traverse speed -/60rpm
Spindle-center height 900 mm
Size & weight of machne
Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm
Machine weight 3000 kg
Required total electrical capacity 25 KVA
Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm²
Year of manufactured 1992
Serial number 9502
Sub-spindle
Maximum thread diameter M12 (brass)
Machining diameters 8 to 32 mm
Spindle stroke (Z2-axis) 215 mm
Spindle speed 300 to 3,000 rpm
Spindle motor 1.5 kW 4P (inverter)

Motors
For main spindle 5.5/7.5 kW (AC spindle motor)
For attachment drive:
Front 0.75kW 4P (inverter type)
Rear 1.5kW 4P (inverter type)
For hydraulic motor 0.75kW 4P
For coolant pump 0.25 kW
For lubricating-oil pump 4 W

Tanks
For hydraulic oil 30 liters
For coolant 150 liters
For lubricating oil 2 liters

Size & weight of machne
Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm
Machine weight 3000 kg
Required total electrical capacity 25 KVA
Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm²

Year of manufactured 1992
Serial number 9502
Freight basis: EXW, unpackaged

Seller

Registered since: 2022

10 listings online

Call

Send inquiry

Telephone & Fax

+36 22 50... show

These listings may also fit your interest.

Listing

CNC Cutter Knife (Plotter) expert international gmbh cut expert ecocam 2

Bielefeld

18,415 km

CNC Cutter Knife (Plotter)
expert international gmbhcut expert ecocam 2

€74,400

ONO plus VAT

Call

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool Fgjdpfx Adjif Ek Ro Ijd • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

See details

Listing

Mechanical pressline Mossini 400 ton -98 Mossini PDM/2BX 400

Olofström

17,812 km

Mechanical pressline Mossini 400 ton -98
MossiniPDM/2BX 400

€62,000

EXW ONO plus VAT

Call

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Fgjdpfx Ajicbbzed Ijd Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

See details

Listing

Kirchen (Sieg)

18,548 km

Machining center
HAASEC-1600

Call

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 Fsdpsvgmr Ijfx Ad Iogd 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

See details

Listing

CNC Rotary table 2000 x 1800 x 16 T UNION Ti 1800

Babberich

18,541 km

CNC Rotary table 2000 x 1800 x 16 T
UNIONTi 1800

Call

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Fgodpfxjkwcdbs Ad Ied Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Lithuania

17,389 km

Guillotine shear
CIDANRAPIDO

Call

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Fgsdpfxsixz D Us Ad Isd Available working lengths: 2600 mm / 3200 mm / 4100 mm

See details

Listing

Bollegraaf HBC140s (2x75kW) Bollegraaf HBC 140

Siddeburen

18,395 km

Bollegraaf HBC140s (2x75kW)
BollegraafHBC 140

Call

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Fgsdpfstvau Aox Ad Ijd Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

See details

Listing

Amurrio

19,741 km

Vertical lathe
DYETV 5400

Call

Condition: good (used), CHARACTERISTICS Plate diameter ⌀; 3200 mm Maximum turning/turning diameter ⌀; 3300 mm - With upright forward; 3300 mm - With upright set back; 5600 mm Min. turning/turning diameter ⌀ - With advanced upright; 800 mm - With upright set back; 3100 mm Max turning height; 750 mm Control; FAGOR 8025 Spindle RPM (2 ranges); - 0,5 - 10 rpm - 10 - 40 rpm Fgsdpfx Adsr I Ayko Ied Motor Power; 80 hp Maximum table load; 30.000 kg

See details

Listing

Bed Type Milling Machine - Universal LAGUN FBF 4300

Korschenbroich

18,583 km

Bed Type Milling Machine - Universal
LAGUNFBF 4300

€16,900

Fixed price plus VAT

Call

Listing

Contamine-sur-Arve

18,946 km

Swiss-type cnc lathe
TORNOSDECO 13A

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 54.035 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 Fodpeuhhp Sefx Ad Iegd - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : IEMCA GENIUS 118 / 32LL - Cooling unit : MARKSA CSW 200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 3

See details

Listing

Radial drilling machine MK5, boring mill, upright drilling machine, radial arm drilling machine, col CSEPEL RFh 75 / 1500

Hessisch Lichtenau

18,422 km

Radial drilling machine MK5, boring mill, upright drilling machine, radial arm drilling machine, col
CSEPELRFh 75 / 1500

€5,800

Fixed price plus VAT

Call

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate Fjdpfx Ajlhwr Red Isgd - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

See details

Advertise here