Used Angle Drill for sale (11,333)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Fpsdpfxewgmyqo Ak Uel Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations Fsdpoy Tzhpsfx Ak Uopl - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: ready for operation (used), Cover SOE graver grinding machine Largest bore of the collet 17.5 mm Largest grinding length 90 mm Largest grinding angle 180° Largest sandable radius 10 mm Coarse displacement 100 mm Fine adjustment 15 mm Pivoting of the dividing head support 90° Coarse adjustment of dividing head slide 40 mm Fpodpfx Asq U R Tzsk Uel Fine adjustment of dividing head slide 12 mm Height from center of tube guide to center of grinding spindle 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Rail for twist drill Optics Collets Grinding wheels You are welcome to visit us for an inspection. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2023, Tube drilling machine, angle drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED WHILE POWERED ON - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (can be extended as needed) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swivel device - Power of drilling unit 1 x 2.2 kW - Motor speed 295 - 2950 RPM - Display of speed on touch panel - Lighting of drilling unit - Integrated tool cabinet Fodpfx Aelgvkisk Uopl - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profiles up to 100 x 100 x 12 mm - L-profiles up to 100 x 100 x 8 mm - Double posts up to 100 x 15 mm - Reaming up to M12 - Holes up to Ø 50 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Fjdpfxexraims Ak Uspl Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: The machines remained in working order at our customer's site until they were dismantled ----- 1) Haberkorn FZS1 slotting machine. 2) Okoma SF3F table milling machine with glazing bead saw. 3) Oertli tooling for the Haberkorn and Okoma machines. 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm Fpsdpfxjxa Hi Ns Ak Uel - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW ...

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic strip feed aggregate angle adjustment pneumatic spindle movement strip supports oscillating drill movement adjustment feed stroke adjustment 380V power supply Fpjdpfxoyxczbs Ak Usl

Condition: excellent (used), Year of construction: 2014, You are bidding on: a branded machine - folding press - from a highly reputable and well-known manufacturer - HM. Device features: - HM folding press - Rail bends cleanly – test possible on site - Angle display - Bending length: 1270 mm - Sheet thickness: up to 3 mm (steel sheet, aluminum, zinc, etc.) - 4-segment rail, see pictures (extension rail also segmented) - Foot-operated closer Fpodpfxsx Hixps Ak Ujl - Partially electric: bends electrically, opening and closing mechanically by foot - Additional: previous owner installed a light with bracket and rear sheet tray (both removable) - Professionally welded, mobile machine frame - Original price over €13,000 Shear HT 100 and other models available optionally. Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steelworking, including folding presses, guillotine shears, drills, slip rollers, slitting and profiling machines, accessory parts (beading units, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice with stated VAT. Free loading possible – weight approx. 600 kg. Inspection and test runs are possible and encouraged by prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should take place within 10 days following the end of the auction. Location: 97261 Article number: Folding Press HM 251202.

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° Fsdpfogd H U Usx Ak Uepl • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet

Condition: used, Column Drill Gillardon Type GSB 32 V Machine No.: Year of manufacture approx. 1975 Drilling capacity: 32 mm Taper: MK 4 – long quill Throat: 350 mm Quill travel: 170 mm Table size: 570 x 470 mm Column diameter: 140 mm Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless Motor power: 1 / 1.5 kW Power supply: 380 Volt, 50 Hz - automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps - spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox - adjustable drilling depth stop - table height adjustment via rack and hand crank Fjdpfx Aeyhf Izsk Uspl - tiltable drilling table with angle scale - drill chuck RÖHM Ø 1 to 13 mm - machine lamp Required space (L x W x H): 1000 x 750 x 2000 mm Weight: 470 kg Good condition

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Fjdpjzuwyzsfx Ak Uopl Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: new, Year of construction: 2026, Invest in the CORMAK HK25 VARIO and experience not only solid construction but also flexibility in carrying out a wide range of projects. This milling and drilling machine is an essential tool for anyone who values efficiency, precision, and versatility. Discover new possibilities in metal machining with a milling machine capable of meeting even the most demanding challenges. Machine features Automatic longitudinal table feed for milling operations Digital speed display Digital drilling depth display Smooth spindle speed adjustment Precision-mounted spindle bearings Machine specifications Parameter Value Drilling capacity 20 mm End milling capacity 16 mm Face milling capacity 63 mm Spindle taper MT3 Spindle stroke 50 mm Head tilt angle ±90° Number of spindle speeds Variable Spindle speed range 50–2250 rpm Working table surface 700 × 180 mm Maximum longitudinal table travel 490 mm Maximum cross table travel 180 mm Maximum vertical head travel 380 mm Number of T-slots 3 T-slot dimensions T12 / 12 mm Fodpfx Akjtz Sx Ee Uspl Motor power S1/S6 0.75 kW / 1 kW, 230 V Dimensions 980 × 600 × 1010 mm Weight 140 kg Standard equipment Drill chuck Automatic X-axis feed Optional equipment Machine stand Machine vice 100 × 80 mm Cooling system

Condition: used, drill diameter 1,5 - 25 mm lip angle 40 - 180 ° 6-jaw-chucks various equipment manual included Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Fjdod Ih Sgjpfx Ak Uspl Device for compressed air cooling various equipment (see pictures)

Condition: used, Year of construction: 1984, Technical details: Fsdpfxeu Ng Irs Ak Uepl grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: good (used), Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine, grinding machine, angle grinder, thread drill grinding machine, bench grinder -Manufacturer: Affilatrici, drill and tool grinding machine type 3M 4/60 -Grinding wheels: installed Ø 180 mm, see photos -Motor power: 1.5 kW -Speed: 2800 rpm -Chuck: Ø 160 mm / Bore Ø 60 mm -Accessories: Centering MK1, 2, 4.5 -Coolant system: Fpjdpfjzrfrtsx Ak Usl -Dimensions: 1080/945/H1300 mm -Weight: 370 kg

Condition: new, Type: BM21S Number of spindles 21 Adjustable drilling angle Working width 700 mm Table dimensions 1000×900 mm Additional support fence 3000 mm Number of clamps 2 Motor power 1,5 kW 380 V 50 Hz Working air pressure 8 bar Drilling step 32 mm Weight 150 kg Fpedpfxofbubue Ak Ujl Transporting dimensions 1200x1000x1300 mm

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer Fpsdpfx Akjzux Tcj Uol - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: used, Year of construction: 1970, 3 -- -- Fpsdpfezycrmsx Ak Usl --

Condition: new, Year of construction: 2026, CORMAK Z7016 Vario Bench Drill Press for Metal – Compact and Functional Precision Drilling Machine The CORMAK Z7016 Vario metal bench drill press is a compact and functional column drilling machine designed for precise drilling operations in professional workshops and industrial applications. Thanks to stepless speed adjustment, a robust construction and versatile equipment, this model provides maximum control over the drilling process and high work efficiency. Main advantages of the machine Stepless speed adjustment – a range of 350–2400 rpm allows optimal adaptation to the processed material. Solid cast iron construction – ensures high rigidity and reduces vibrations during operation. Height and angle adjustable worktable – tiltable from -45° to +45° with rack-and-pinion height adjustment. Laser pointer and LED lighting – provide maximum drilling accuracy and improved operator comfort. Electronic speed display – enables real-time control of operating parameters. 65 mm vice included – the machine is ready for operation straight after unpacking. Construction and technology The Z7016 Vario metal bench drill press is built on a solid Ø60 mm column and a rigid cast iron base measuring 400 × 232 mm. The machine body and worktable are made from precisely machined castings. The MK2 spindle taper allows the use of a wide range of tools, while the 90 mm spindle stroke enables machining of deeper holes. With an overall height of only 910 mm, the machine is an ergonomic and mobile workshop solution. Precision and work efficiency Equipped with a 550 W (S1) / 700 W (S6) motor, the CORMAK Z7016 Vario column drill press allows efficient drilling in metal up to 16 mm in diameter. The stepless speed adjustment eliminates the need to change belt positions, significantly reducing machine setup time. The ergonomic three-arm feed handle, depth indicator and precise spindle guidance system ensure high repeatability and accuracy of drilled holes. Applications The Z7016 Vario metal bench drill press is recommended for: locksmith and service workshops, maintenance departments, technical schools, small production lines and prototyping workshops. Standard equipment 65 mm machine vice Laser drilling pointer LED work area lighting Electronic speed display Three-arm spindle feed handle Tilting table with rack-and-pinion height adjustment Technical specifications Maximum drilling diameter 16 mm Spindle speed range 350–2400 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 90 mm Spindle-to-column distance 150 mm Foderif H Eepfx Ak Uopl Spindle-to-base distance 430 mm Table height adjustment range 335 mm Column diameter 60 mm Table dimensions 240 × 240 mm Base dimensions 400 × 232 mm T-slot width 14 mm Motor power (S1 / S6) 550 W / 700 W Overall height 910 mm Weight 46 kg

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Fpedpfeya Dc Iox Ak Uol Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: new, Year of construction: 2026, Z7020 Vario Bench Drill Press for Metal – Solid, Compact and Precise Drilling Machine The Z7020 Vario metal bench drill press is a solid, compact and precise column drilling machine designed for locksmith workshops, tool rooms and production facilities. Thanks to stepless speed adjustment, an electronic speed display and a rigid construction, the machine ensures high-quality drilling performance across a wide range of metal materials. Main advantages of the machine Stepless spindle speed adjustment from 190–2700 rpm – allows optimal adjustment of operating parameters to the type of material being processed. Electronic speed display – provides precise control of drilling parameters. Laser pointer – facilitates hole positioning and improves drilling accuracy. Tilting worktable from -45° to +45° – enables angled drilling without repositioning the workpiece. Solid Ø70 mm column and heavy-duty base – ensure rigidity and stability during operation. 100 mm vice included – allows quick and secure clamping of workpieces. Work area lighting – improves comfort and safety when working in low-light conditions. Construction and technology The Z7020 Vario column drill press has been designed for long-term and reliable operation. The precisely machined spindle with an MK2 taper and a maximum spindle stroke of 120 mm provide a wide operating range. The rack-and-pinion table height adjustment system allows quick and accurate positioning of the work area. The machine’s cast iron construction reduces vibrations and improves machining quality. Precision and work efficiency Thanks to its rigid construction and optimized axis geometry, the Z7020 Vario metal bench drill press provides high drilling accuracy. The stepless speed adjustment allows perfect adaptation to the hardness and structure of the processed material, significantly extending tool life and increasing production efficiency. Applications The Z7020 Vario is a professional bench drill press suitable for: metalworking workshops, maintenance departments, production and service facilities, technical schools and training centres. It is ideal for both single-piece production and small-batch manufacturing wherever precision and repeatability of drilled holes are required. Standard equipment 100 mm machine vice Laser pointer LED work area lighting Three-arm spindle feed handle Electronic spindle speed indicator Drilling depth stop Technical specifications Fpedpfx Aovzqrzsk Ujl Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 530 mm Table height adjustment range 380 mm Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Overall height 1120 mm Weight 66 kg

Condition: new, type of input current: DC, total width: 370 mm, total length: 180 mm, total height: 190 mm, input voltage: 230 V, rotational speed (max.): 5,300 rpm, overall weight: 10 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.18 kW (0.24 HP), grinding diameter: 13 mm, Sharpening of drills with a diameter of 2 mm to 13 mm Adjustable angle: 90 and 135 degrees Grinding speed: 5300 rpm Grinding wheel: CBN 200 Motor: 230V/1Ph/180W Fsdpfx Aega T D Tok Ujpl Weight: 10 kg

Condition: good (used), Siegmund System Perforated Grid Table incl. Silverline Profile Machining Station For sale is an extremely robust, combined industrial workstation designed for metalworking, jig construction, or precision profile manufacturing. Fsdpfx Akeztawge Uspl The system is composed of top-tier premium components: 1. Siegmund System Perforated Grid Table (Base) - High-precision, solid welding and clamping table from the global market leader, Siegmund; highly resistant to distortion. - The perforated grid system (including perforations on the side panels) allows for the flexible and highly repeatable positioning of stops, clamping bolts, and angle brackets. 2. Silverline Clamping & Machining System (Superstructure) - Solid superstructure featuring precision linear guides for longitudinal movement. - Two parallel-mounted yellow motor heads (milling/drilling units) for simultaneous or sequential machining operations. - Three heavy-duty horizontal clamps secure workpieces firmly against the stops—ensuring rock-solid stability while protecting the material. 3. Convenient Pneumatic Control System - Ergonomic control panel at the front featuring a numbered 5-lever control system. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge (manometer) and safety emergency stop switch. - Powerful central electric motor driving the mechanical/hydraulic systems. "A complete solution from a single source: We would be happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production. Fjdozp Ih Espfx Ak Ujpl

Condition: used, Year of construction: 2026, total height: 600 mm, total length: 2,400 mm, total width: 1,200 mm, Colour: Grey Welding table / Clamping table * Drilled holes! * Diagonal grid! Dimensions: 3000x1500mm Table-thickness: 15mm Hole-diameter: 28mm Extras at extra cost - 4x 3D Angle 300mm - 6x Stop 150mm - 6x Stop 225mm - 1x Protractor  Fpedpfx Aozry Rqok Usl - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Transport dimensions: 2400mm x 1200mm x 600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum