Angle gearbox buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
CABINET PRESS / 3 to. Press pressure, through bevel gear *** UNUSED SHOW MACHINE *** "100% in germany made" - angle gearbox and cylinder 3 to print - exact, winkelgenaü edge, banding, body & frame press - Einspannmasse: (H x W) 1600 x 2900 mm - Einspannmasse: (H x W) at frame 1600 x 2600 mm supply equipment (Fig. contains partially or special equipment): - 4 press units with bevel gear-cylinder, - 1 page printing with two-angle gear - 90 degree stop - suspension Optional accessories: - Two side... more
1

ANGLE ROLLS BERTSCH AR25

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: Dvhpchz BERTSCH AR25 Hydraulic Angle Bending Roll -- Pipe3-1/2" SCH. 40 to 48" min. dia. --"T" leg-in 5" X 9.5# to 192" min. dia. -- Flat plate 1-1/2" x 7" to 23" min. dia. -- Square bar 2-1/2" to 25" min. dia. -- "T" leg-out 5" X 9.5# to 192" min. dia. -- Angle leg-in 4" x 4" x 3/8" to 60" min. dia. -- Die diameter 15" -- Angle leg-out 5" x 5" x 3/8" to 68" min. dia. -- Plate on edge 1" x 4" to 40" min. dia. -- Rolling speed 0' to 16' per min -- "I" beam on web... more
1

Motor Gearbox Lenze GKS09-4M HAR

Pomona, United StatesUnited States
3599 km
excellent (used)
Motor Gearbox great condition only used a single time S3ofi9 more
5
working area: mm Punching capacity:600 kN punch diameter: biggest flat bar:200 x 15 mm Smallest flat bar:40 x 5 mm biggest angle:130 x 15 / 130 x 200 x 15 mm smallest angle:40 x 5 mm length max.:12 m mm Bb9hjtaxqh Mubea punch and shear line for punching and shearing of angle and flat material. The punch and shear system consists of a material feed system with a clamp measuring system for length measurement. The Mubea angle punching and shearing line has a hydraulic shear unit, a punching unit... more
6
surface area 240 x 700 mm no. of flutes 5 groove width 12 mm turnability of the table - man. & mec. 30 ° swivelling range 2x45 Grad total power requirement kW weight of the machine ca. 0,10 t Vqltl3 373/5000 This is a pivotable angeled table as an attachment to a milling machine DECKEL. Rotatability of the table in vertical axis for both Directions 30 degrees. Tilting of the table in horizontal axis (vertical to table slide)in two directions 45 degrees. Pivotability of the table horizontal... more


angle gear...
daily

New machines via email!

Stay updated!
12
Serial No. 52064 Control Siemens 840D Colour Graphic Ccontrol Table Size 1700mm Table Speeds Low Range 0-30 rpm, Middle Range 30-74 rpm, High Range 74-155 rpm Swing 2000mm Height Under Cross Slide 1800mm Height Under Turret Twin Ram Cross Travel 1500mm Cross Slide Rise & Fall 800mm Ram Rise & Fall 1200mm Bciegnr9yg Vertical Traverse Cross Rail 1500mm, Vertical Travel of Each Ram 1000mm Input Main Motor 75 kW Fitted with 2 x 12 Station Automatic Tool Change Equipment 17 x Quick Change Toolholder... more
1
Elect./Voltage: 230/460/3/60 Bbvrfnogpt PULLMAX Z31 ROLL BENDING (ANGLE ROLL) --Angles - leg out: 3" x 3" x 3/8" - minimum diameter 36" --Angles - leg in: 2.5" x 2.5" x 3/8"-minimum diameter 48" --Minimum angle leg out: 1" x 1" x 1/4" - minimum diameter 18" --Minimum angle leg in: 1" x 1" x 1/4" - minimum diameter 18" --Flats on edge: 3" x 9/16" - minimum diameter 20" --Minimum flats on edge: 1" x 1/4" - minimum diameter 14" --Flats on flats: 5" x 1" - minimum diameter 16" --M... more
1

Motor Gearbox Lenze GKS09-4M HAR

Peterborough, United KingdomUnited Kingdom
3599 km
excellent (used)
Motor Gearbox great condition only used a single time Bctecbjky2 more
3

Aut. cross cut saw (double angle) H&M HM-Z/N

Hardinxveld-Giessendam, NetherlandsNetherlands
6242 km
2001
good (used)
H&M automatic cross cut saw, type HM-Z/N Hk8xa9gsu manufacture year 2001 Machine specifications: - For straight & (double) angle cutting - Max. workpiece lenght 10500 - Push infeed system - CNC controller - Outfeed table more
2
surface area 350 x 650 mm Qmb2iyjcj no. of flutes 5 groove width 14 mm swivellable 360 ° Total height 370 mm clamping slots 4x Nutenbreite 14mm distance 135 mm total power requirement 0,00 kW weight of the machine ca. 0,20 t dimensions of the machine ca. m pivotal angled table to apply on a milling machine type DECKEL FP3 in both direction 30° degree. pivotability of table round the vertical axis (parall to tablesledge) in both directions 180° degree. more
1

Miscellaneous Angle Plates 2 off

Sheffield, United KingdomUnited Kingdom dealership location
5781 km
ready for operation (used)
450 x 450 x 1000mm Hpnt00t more
1

ANGLE ROLLS PULLMAX Z31

North Carolina, United StatesUnited States dealership location
518 km
1975
used
Elect./Voltage: Gmnponi2s PULLMAX Z31 ROLL BENDING (ANGLE ROLL) --Angles - leg out: 3" x 3" x 3/8" - minimum diameter 36" --Angles - leg in: 2.5" x 2.5" x 3/8"-minimum diameter 48" --Minimum angle leg out: 1" x 1" x 1/4" - minimum diameter 18" --Minimum angle leg in: 1" x 1" x 1/4" - minimum diameter 18" --Flats on edge: 3" x 9/16" - minimum diameter 20" --Minimum flats on edge: 1" x 1/4" - minimum diameter 14" --Flats on flats: 5" x 1" - minimum diameter 16" --Minimum flats ... more
1

Motor Gearbox Flender CAZ48-M80M4

Peterborough, United KingdomUnited Kingdom
3599 km
excellent (used)
Great condition only used once Bctebog9qz more
4

Angle clamping divice

Paderborn, GermanyGermany dealership location
6488 km
good (used)
Used angle clamping device Width x Height x Depth = 1300 x 1300 x 800 mm 3layoneg8 T - Slot : a / b / c = 30 / 50 / 22 mm Weight approx.= 1800 kg more
2
surface area 1000 x 440 mm no. of flutes 5 groove width 16 mm flute distance 90 surface area senkrecht 600 x 220 mm no. of flutes 2 groove width 16 mm flute distance 90 distance work spindle /surface of the table 0 - 546 mm total power requirement 0,00 kW Sqrwx8na8 weight of the machine ca. 0,20 t dimensions of the machine ca. m table to ad to a milling machine type FP3L more
5
working area: mm Punching capacity: kN punch diameter: 9pv0yxmpc Spare parts for a FICEP a16.36N In this Ficep spare parts package the following parts are included: control panel and monitor, 3 servomotors for the X, Y and Z axles (Type 4452200033) and a Mitrol CNC control. more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Dsidj9p TAURING 2RT/100-H Angle Bending Roll --Bending capacities – Mild Steel: - Angles, Leg Out (Min. 63" Dia.) 4" x 4" x 3/8" - Angles, Leg In (Min. 78.74" Dia.) 3" x 3" x 5/16" - Smallest Angle, Leg Out (Min. 27.56" Dia.) 2" x 2" x 1/4" - Smallest Angle, Leg In (Min. 35.43" Dia.) 2" x 2" x 1/4" - Channels, Flanges Out (Min. 78.7" Dia.) 9-1/2" x 2-3/4" - Chan... more
1

Motor Gearbox Nord SK32100

Peterborough, United KingdomUnited Kingdom
3599 km
excellent (used)
Motor Gearbox used once and still in great condition Bfytd3ix more
4

Angle Clamping Device

Paderborn, GermanyGermany dealership location
6488 km
good (used)
Used angle clamping device Mqjc9 Width x Height x Depth = 1300 x 1300 x 800 mm T - Slot : a / b / c = 30 / 50 / 22 mm Weight approx.= 1800 kg more
6
Working widths 2000 mm Roller width 2200 mm Number of rollers 2 Stück Supporting roller - dia 270 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 11 to Xhvhwmz8j Cloth guiding system Breithalter,1 Leitwalze Drive side nach Auftrag Operting side nach Auftrag Liquor trough with displacer + Leitwalze Capacity of dye tub 60 Liter Drive shaft 70 mm dia Hydraulic unit for combined pressure... more
2

Glue application with gearbox IMA 04.088

Barntrup, GermanyGermany dealership location
6504 km
used
Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156 B3rywqt more
1
Bcuzefvds7 M. No 01/6675917 more
2
length - 400 mm Fizyb9rn breadth-base - 235 mm height - 610 mm weight approx. 68 kg more
7
Used angle clamping device Width x Height x Depth = 2000 x 2000 x 1200 mm Bcuv22zsp9 T - Slot : a / b / c = 28 / 50 / 22 mm Wweight approx. = 4700 kg more
5
Working width 3600 mm Roller width 3800 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 40 N / mm Pressure total 16 to Cloth guiding system for woven fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Operting side nach Auftrag Drive side nach Auftrag Drive shaft dia 80 mm Hydraulic unit for separately pressure aus Edelstahl B... more
9

Angle / cube EUROPEAN

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
DIMENSIONS Length 1200 mm Width 500 mm Height 800 mm Ss20b0 more
1
Manufacturer / Origin: KEB ANTRIEBSTECHNIK /Germany Nfocx more
2
length - 590 mm breadth-base - 400 mm Gracj0bfo height - 485 mm weight approx. 104 kg more
7
Used angle clamping device Width x Height x Depth = 2000 x 2000 x 1200 mm Hlsf3yu28 T - Slot : a / b / c = 28 / 50 / 22 mm Weight approx. = 4700 kg more
4
Working widths 2200 mm Roller width 2400 mm Number of rollers 2 Stück Supporting roller - dia 270 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 12 to Cloth guiding system 2 Profilbreithalter,1LW Liquor trough with guide roll und Doppelwandheizung Drive side nach Auftrag Operting side nach Auftrag Hydraulic unit for combined pressure aus Edelstahl Liquor trough with displacer +1 Lei... more
7

Angle / cube Stolle

Babberich, NetherlandsNetherlands dealership location
6320 km
1980
ready for operation (used)
Technical data T NutengrößeT 28 mm Lot T-Nuten5 x Distance from T-slots / Sprung125 mm Amount / number 400 mm Width 500 mm ... more
5

Angle punching line Voortman V550

Köln, GermanyGermany dealership location
6416 km
1999
used
working lenght:6.000 mm pressing power:180 t Punching capacity:1000 kN cutting capacity:Flach - max. 22 mm cutting capacity:Winkel - max. 150 x 150 x mm punch diameter:30 mm number of punch tools:3 Stk. / pcs. quick change toolholder: connected load frequency:3 x 400 V control:VACON 110 accessories::Zufuhrwagen mit Materialk accessories::Schleppketten-Quertranspo weight of the machine ca.: t Ewx2awkae Voortman V500 is a punch shear system for flat steel and angle profiles. Horizontal and v... more
2
length - 800 mm breadth-base - 400 mm Yxcrbvwzp height - 700 mm welded assembly weight approx. 90 kg more
3
involute control for spur gears 0,1 -20 Modul involute control for helical gears 0,1-35 Modul max. helix angle 90 ° gear diameter 0 - 1600 mm checking wheel weight - max. 4000 kg tooth length - measurable without break 250 mm total power requirement 6 kW weight of the machine ca. 4,1 t 832ezncuz more
6
Working width 2400 mm Roller width 2600 mm Number of rollers 2 Stück Supporting roller - dia 295 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 220 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 13 to Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive side nach Auftrag Xhved8wn7 Operting side nach Auftrag Drive shaft dia 80 mm Hydraulic unit for combined pressure • 2-Bowl-High efficiency squeezer with one "Swimming... more
1

Angle / cube Asquith UK

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Technical data Tclcbxu9 Amount / number of Platten4 mm Width: 1000 mm Height 1020 mm more
6
Adjustable angle Elbe ear unit with SK40 recording for SCM CNC-angle unit for drilling Drilling adapter M10 and additional adapter for normal 10 mm Schaftbohrer Unit can be rotated through 360 degrees C axis 2qsffi Adjustment range of - 10 to 90 degrees Ratio 1:1 Speed Max 6000 RPM The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. Includes instructions and detail drawing Please... more
2

clamping angle for borers unbekannt

Borken-Burlo, GermanyGermany dealership location
6360 km
used
P37gkcei more


angle gear...
daily

New machines via email!

Stay updated!

to

to

Edit search
ANGLE GEARBOX
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close