Gantry milling machine

Unisign Uniport 6000

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm Gbjdpfx Anoy A Ifmomsr • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Technical Specification Taper Size SK 50

Condition: excellent (used), Year of construction: 2018, operating hours: 15,854 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, workpiece weight (max.): 500 kg, total height: 3,060 mm, total length: 3,075 mm, rotational speed (max.): 12,000 rpm, overall weight: 11,000 kg, spindle nose: SK40, number of slots in tool magazine: 30, chuck outer diameter: 3,325 mm, Equipment: chip conveyor, fume extraction, CNC 5-Axis Machining Center MAZAK Variaxis J600, 2018 You are welcome to inspect the machine in our workshop while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK Variaxis J600 is a powerful vertical 5-axis machining center for the precise and efficient complete machining of complex milling parts. It features a tilting A-axis (-120° to +90°) and a continuously rotating C-axis (±360°), allowing even complex geometries to be completed in a single setup – ideal for general mechanical engineering as well as series and single-part production. The robust design with travels of 850 mm in the X-axis, 550 mm in the Y-axis, and 510 mm in the Z-axis offers ample working space. The rotary table with Ø600 × 500 mm can accommodate workpieces with a maximum diameter of approximately 730 mm and a maximum height of 450 mm – with a maximum table load of 500 kg. The distance from the spindle nose to the table surface can be adjusted between 70 and 580 mm, enabling flexible accommodation of various workpiece geometries. The powerful milling spindle with speeds up to 12,000 rpm and the SK40 tool holder (DIN 69871) ensure high cutting performance and precision. The tool magazine (ATC) with 30 tool positions ensures short non-cutting times and flexible machining processes, even for complex manufacturing tasks. The machine is controlled via the modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. Comprehensive features ensure optimal machining conditions: internal coolant supply (IKZ), automatic tool length measurement, synchronous thread drilling, cylindrical interpolation, and the high-speed functions High Speed, Super High Speed, “G00 slope constant,” a KSS mist extraction system from LNS, a chip conveyor from Mayfran, and a Renishaw measuring system. Gjdpszkmaijfx Anmobr With a machine weight of approximately 11,000 kg and dimensions of 3,075 × 3,325 × 3,060 mm (L × W × H), the model offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile 5-axis machining center that guarantees high precision, performance, and reliability in industrial production. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Gbsdpfx Aoxvw Izjnmor Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Gbjdpfsur H I Nex Anmer Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Lasko hammer KGK 063 Gbodou Eb Nispfx Anmsr Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel Gbsdpfx Anezlcyujmer - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Gedpfx Ajx I A Awonmsbr Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), With C-axis With driven tools FANUC 21i TB Manual Guide control Turning diameter max 355 mm Turning length -1330 mm Spindle speeds -2'800 rpm Top turret tool holders 12 driven positions Misc. accessories Gbjdpfx Anozhmnbomor MARCELS MASCHINEN CH

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm Gjdpfjy Nd U Rex Anmobr z-travel 375 mm weight of the machine ca. 7150 kg

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Gbsdpfx Aney Ipp Romor Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.