Used Amada Lc 2415 for sale (215)

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 64050018, saw band length: 3,505 mm, saw band width: 34 mm, cutting range round steel at 90°: 250 mm, cutting width (max.): 300 mm, cutting height (max.): 250 mm, saw band speed: 15,000 mm/s, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Cutting capacity for single cuts Round material: 250 mm Square material: 250 x 300 mm Cutting capacity for bundle cuts Square material: 50 x 150 mm to 150 x 150 mm Saw band dimensions: 3,505 x 34 x 1.1 mm Motor power: 3.7 kW, 4P Hydraulic motor: 0.75 kW, 4P Coolant pump motor: 0.12 kW, 2P Saw band speed: 24 – 90 m/min at 50 Hz Saw band swivel angle: 45° Coolant Tank capacity: 85 l Pump: centrifugal pump Hydraulic unit Tank capacity: 30 l Pump output: 20 l/min Set pressure: 2.7 MPa Table height: 700 mm Load capacity: 1,500 kg MACHINE DETAILS Dimensions: 5,200 x 2,100 x 1,700 mm Weight: 1,700 kg Transport dimensions: 1,962 x 2,384 x 1,285 mm Machine transport weight: 1.5 t Kodpfxswvh E He Ad Newt Serial number: 64050018 Supply voltage: 3-phase, 400 VAC ±10%, 50 Hz Connected load: 8 kW EQUIPMENT - Technical documentation - Additional roller conveyor - Support length: approx. 3,000 mm - Total support length: approx. 5,000 mm

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 44650046, saw band length: 4,570 mm, saw band width: 41 mm, cutting height (max.): 400 mm, saw band speed: 1,500 mm/s, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges collection within the period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Cutting capacity round material: Ø 406 mm Cutting capacity square material width: 400 mm Cutting capacity square material height: 400 mm Maximum machine load capacity: 2,500 kg Kedowvhxajpfx Ad Newt Maximum roller conveyor load capacity: 2,000 kg/m Min. workpiece remnant length ensuring clamping edge: 76 mm Min. workpiece remnant length without workpiece detection: 30 mm Saw blade dimensions: 41 x 1.3 x 4,570 mm Cutting speeds: 15 to 90 m/min (50 Hz) Cutting speeds: 17 to 90 m/min (60 Hz) Clamping device pressure adjustment: 570 – 1750 N Cut-off length: 10 to 5,040 mm Increments: 0.1 mm Single feed: 570 mm MACHINE DETAILS Installation dimensions: 5,200 x 2,350 x 2,000 mm Weight: 2,950 kg Saw drive motor: 5.5 kW, 4 pole Hydraulic pump motor: 1.5 kW, 4 pole Coolant pump motor: 0.18 kW, 2 pole Connected load: 12.3 kVA Machine dimensions length: 3,006.5 mm Machine dimensions width: 3,288 mm Machine dimensions height: 2,564 mm Working height: 842 mm Hydraulic oil tank: 40 litres Cutting fluid tank: 120 litres EQUIPMENT - With technical documentation - Additional roller conveyor - Support length: approx. 2,000 mm - Total support length: approx. 5,040 mm

Condition: excellent (used), sheet width 2500 mm plate thickness 4 mm Control GPN Kwodpfxovwgpno Ad Nst weight of the machine ca. 5000 t dimensions of the machine ca. 3000 x 2000 x 1700 m

Condition: used, Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled back stop up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Kwsdjtx E E Iepfx Ad Net Light barriers for the rear area Replacement blades Weight approx. 9000 kg

Condition: good (used), total width: 3,000 mm, pressing force: 100 t, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Kodpfovwcduox Ad Nowt Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, cutting force: 250 t, sheet thickness (max.): 6 mm, cutting length (max.): 220 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet thickness: 6 mm Pressure: 250 t Blade length: 220 mm Kwsdjwf It Aspfx Ad Net Stroke length: 24 - 26 mm Ram stroke: max. 32 mm MACHINE DETAILS Machine weight: 1,600 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 2,500 mm, pressing force: 80 t, table width: 60 mm, TECHNICAL DETAILS Pressure: 80 t Kwsdpewmdf Dofx Ad Njt Bending length: 2,500 mm Table width: 60 mm Working height: 960 mm Dimensions and clearances Clearance between columns: 2,160 mm Clearance between press beams: 370 mm Thrust: 400 mm Weight Machine weight approx.: 5,000 kg

Condition: good (used), functionality: fully functional, Year of construction: 2004, working width: 3,000 mm, stroke length: 200 mm, back gauge: 600 mm, pressing force: 100 t, Bending cell/press brake with bending robot and automatic loading and unloading TECHNICAL DETAILS Control system: AMNC II PC Pressure: 100 t Folding length: 3,000 mm Stroke: 200 mm Control system: AMNC II PC Projection: 415 mm Installation height: 500 mm Adjustment range: Back gauge: 600 mm Weight: 10 tons Kwodpevzraasfx Ad Not EQUIPMENT - Automatic loading and unloading by robot - Bending robot to support the bending process

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, bending force (max.): 220 t, working width: 4,200 mm, stroke length: 350 mm, installation height: 620 mm, table height: 960 mm, TECHNICAL DETAILS Press Data Press force: 220 t Bending length: 4,200 mm Distance between uprights: 3,760 mm Stroke: 350 mm Installation height: 620 mm Table width: 180 mm Table height: 960 mm Approach speed: 100 mm/s Control: AMADA OP 2000 MACHINE DETAILS Connected load: 20 kW Machine weight approx.: 20,000 kg Operating hours: 8,444 h EQUIPMENT Backgauge type B Laser safety set Digital angle measurement system Digipro Kwodpfx Adew Dcdtj Net 2-finger kit Manual support system WILA Modufix system WILA hydraulic unit

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Kwsdjwu Inlopfx Ad Nst Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Locking speed: 70 mm/sec Power needed: 380V

Condition: good (used), Year of construction: 2002, operating hours: 43,000 h, machine/vehicle number: V020113, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Kjdpfsuwktnox Ad Nowt Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: ready for operation (used), Year of construction: 2000, operating hours: 20,000 h, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Sheet size: 1,500 x 3,000 mm MACHINE DETAILS Operating hours: 20,000 h EQUIPMENT Ksdpfew Swdijx Ad Nswt Material handling Tools Grinding machine

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Kwodpfx Aowc S R Hed Net Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm

Condition: good (used), Year of construction: 1997, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, total height: 2,000 mm, total width: 5,000 mm, total length: 15,000 mm, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, type of input current: three-phase, travel distance X-axis: 2,500 mm, Amada VIPROS 358 KING + LKI L III 250 automatic loader + PR III automatic unloader + noise protection cover . Ksdpsvb Dn Aefx Ad Njwt It can work complete automatic , also sorting your parts on the pallet . The machine was verry well mentained , we bought this machine and did not finish installation because we bought a new machine . The machine has SICK light barriers and original protection fences . For more informations please contact me . CNC AMADAN 04 P-C N. 2 pneumatic punches Brush table for low noise operation & scratch free processing Device for automatic repositioning of the sheet metal Air Blow automatic tool lubrication

Condition: new, functionality: fully functional, Year of construction: 2005, Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Weld Control Easy to use programming interface For controlling and integrating projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer Appliances Nuts and Studs Projection Welding Electronics and Automotive Parts Aerospace Parts Office Furniture Automotive Sheet Metal Input Power: 230-460 VAC Output Range: 1000-80,000 A Phase: Single Welding Period Range: 0-99 Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Kjdpfxjwcax Es Ad Nowt Condition: Used, New AC Resistance Welding Controller Easy to use programming interface Used to control and integrate projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer appliances Nuts and studs projection welding Electronic and automotive components Aerospace components Office furniture Automotive sheet metal Input power: 230-460 VAC Output range: 1000-80,000 A Phase: single Welding period Range: 0-99

Condition: good (used), functionality: fully functional, Year of construction: 1987, working width: 2,000 mm, stroke length: 105 mm, distance between stands: 1,600 mm, overall weight: 4,300 kg, total width: 2,000 mm, pressing force: 50 t, Promecam ITP2-050-20 Converted to Delem DA 65R control system in 2019 15" touch screen with graphics Kodpfx Adeu Dm Iuo Newt Bending length 2000 mm stand passage 1600 mm Bending pressure 50 T CNC back gauge X-R-Z1+Z2 axis Connected load 7.5kw Stroke 105mm Intermediate pieces Int100 Front support tables Amada tool system incl. many tools

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Kjdpfxjwcd Sps Ad Newt Bending length: 3100 mm Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: excellent (used), Model Amada HF5012, 4 axis CNC Press brake Year 2003 Tonnage 50 tons CD 2000 control with monitor Erwin Sick machine mounted light screen guarding system, side and rear interlocked fencing Max. Bend Length 1270 mm Width Between Columns 1035 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 6 kw Weight 3100 kg Kodpfevxuk Nex Ad Njwt Dimensions Machine Length 2165 mm Machine Width mm Bed Length mm Distance Between Bed Bed Height 960 mm Machine Height 2300 mm Daylight Gap mm Throat Depth mm BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1990, pressure:80 t Kwodpfxocxxvge Ad Nst chamfer lenght:2505 mm distance between columns:2200 mm total power requirement:7,3 kvA weight of the machine ca.:5,6 t dimensions of the machine ca.:3 x 2,25 x 2,20 m

Condition: like new (used), Year of construction: 1999, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1999 stock no. 01917 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 Kjdpfjpygydox Ad Nowt THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Kedpfxovn S I Dj Ad Nswt Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools

Condition: good (used), functionality: fully functional, We are selling a used Amada CTB 400 (carbide-capable bandsaw) with 3m powered roller conveyor and 6m outfeed roller conveyor. Technical specifications: - Cutting capacity round: 430 mm - Cutting capacity square: 430 x 430 mm - Cut-off length: 5 - 9999 mm Kwjdpfx Aswybkdod Nst - Bandsaw motor power: 7.5 kW - Total power: approx. 10 kW - Saw blade dimension: 4715 x 41 x 1.3 mm (suitable for carbide) - Variable blade speed: 15 - 150 m/min - Feed length: 10 - 9999 mm - Minimum remnant length: 15 mm - Dimensions (W x D x H): 2630 x 2740 x 2422 mm - Weight: approx. 4500 kg CNC control: Speed / Power Material / Cross-section Parallelism display Automatic parameter correction

Condition: refurbished (used), Year of construction: 2005, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2005 hours 9000 Tonnage 1300 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Kedpfx Asthgidsd Njwt Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2007, Amada AC 2510 NT CNC Turret Punch Year 2007 200kN force, 51 tool stations Kwjdpfx Aowgb E Usd Net Country of Manufacture: Japan Bridge Type 20 tonnes (196kN) Press Type AC Servo Drive Axis Traverse Distance 1270 x 2500mm Workable Maximum Sheet Size 1270mm x 5000mm (with auto repositioning) Fully serviced with Amada uk. Max. Material Thickness 6.4mm mild steel Max. Hole Diameter 88.9 mm Max. Material Weight 150 kg No. of Stations 24 A up to 12.7 mm 18 B up to 31.7 mm 3 C up to 50.8 mm 2 D up to 88.9 mm 3 AI up to 31.7 mm 1 AI up to 50.8 mm Axis Speed (X, Y) 100 m/min Hits Per Minute Turret Speed Bi-Directional 30 R.P.M Punching Accuracy 0.1 mm (incl 1 reposition) Ram Stroke Length 41 Tool Lubrication Axis Drives Electric Power Required 19 KVA Air Pressure Required 5.0 Kgf/cm2 Air Flow 500 l/min Machine Length 4165 mm Machine Width 5120 mm Machine Height 2082 mm Machine Weight 13000 kg AMNC-F windows based network control 15″ Colour LCD touch screen

Year of construction: 2010, condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Kedpfsv Rp Tcox Ad Nswt