Used Amada Hfa 330 for sale (216)

Condition: used, Year of construction: 2012, Functionality: fully functional, saw band length: 4,570 mm, saw band width: 41 mm, Amada HFA 400 with NC control and cutting monitoring Kjlhsv Rlbcocdw Ijlp Cutting area 420x420 round and square Drive 6 kW Saw blade 4570x41x1.3 Dimensions 22250x2700x1600mm high Weight 2300 kg Machine ran flawlessly until recently. A major maintenance check was performed in August 2024. Equipped with a chip conveyor and pressure reducing unit for cutting thin-walled pipes

Condition: excellent (used), Year of construction: 2012, saw band length: 6,670 mm, saw band width: 67 mm, total height: 1,900 mm, total length: 3,015 mm, total width: 1,900 mm, cutting capacity: 530 mm, Automatic kerf compensions MultipleJob & Pieces & Feed selection Double column guidance Adjusting doiuble wire brushes Return conveyor with lane changer Capacity 90°: 530 x 530° Feed single stroke: 10 mmmm Feed multiple stroke:10000 mmmm Klsljvkdgwohcdw Ijp Cutting speed Vario:15 - 120 M/min Circle blade size: 6670 x 67 x 1.7mm Power: 7.5kW Length: 3015mm Width: 1900mm Height: 1900mm Weight: 6300kg

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Used automatic band saw Kjlhcjvbvr Hodw Ijlp Cutting area: (round) 700mm (rectangular) 700 x 800mm Saw band: 7600 x 50 x 1.6mm Saw band drive: 7,5kW Hydraulic drive: 2,2kW Total weight: 6000kg

Condition: ready for operation (used), Package offer, which includes: ● a CNC-controlled Amada HFA530CNC automatic metal cutting band saw, ● two Amada CTB400 vertical hard metal cutting band saws, ● a KASTOtec A 3 Type 6600 Series 103 band saw. CNC-CONTROLLED AUTOMATIC METAL CUTTING BAND SAW HFA530CNC Fully automatic band saw. The weight of these machines is twice that of most conventional machines of similar capacity. By lowering the center of gravity, it paves the way for stable performance. Technical data: ● Cutting range: Kjlhcjum U Eljdw Iolp round 30-530mm rectangular width height 30x30-530x530 ● Work table load: 4000 kg ● Belt dimensions: 67x1.6x6670 mm ● Belt speed: 15-120 m/min inverter ● Belt tension: hydraulic ● Power supply: 400V ● Minimum cutting length: 10mm ● Control: CNC ● Power requirement: 13 kW ● Machine weight: 6,3t KASTOtec A 3 Type 6600 Series 103 Machine dimensions: - Length: 2140 mm - Width (without vortex conveyor): 3245 mm - Height: 2310 mm Total weight: 3800 kg Total drive power: 14.0 kW Saw motor drive power (standard: type A, F, S): 5.5 kW Cutting area: - round: 330 mm - square (H x W): 330 x 330 mm - flat (H x W): 330 x 430 mm - Smallest cutting dimension: 10 x 10 mm - Minimum cutting length: 6 mm - Minimum length of a single cut: 10 mm - Minimum cutting length in automatic mode: 35 mm - Maximum automatic single feed (standard): 600 mm - Maximum automatic single material feeding (options): 1500/3000 mm - Multiple material feeding: 9999 mm - Roller conveyor length: 1568 mm - Maximum piece weight: 2275 kg - Belt speed: infinitely adjustable 12-120 m/min HARD METAL NC VERTICAL BAND SAW AMADA CTB 400 TECHNICAL DATA: ●Cutting range: Cuts min. 30 mm Square cutting 430 mm Round cutting *200 mm Cutting lengths 5-9999 mm ●Saw blade motor 7.5 kw ●Saw blade dimensions 4715 x 41 x 1.3 mm ●Maximum load 2500 kg ●Cutting speed 15 - 150 m/min ●Machine dimensions 2632 x 2740 x 2422 mm ●Machine weight 4500 kg

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, saw band length: 6,670 mm, saw band width: 67 mm, cutting capacity: 530 mm, table height: 830 mm, overall weight: 6,300 kg, height adjustment type: hydraulic, power: 7.5 kW (10.20 HP), saw blade length: 6,670 mm, net weight: 6,300 kg, AUTOMATIC CNC CONTROLLED METAL CUTTING BAND SAW HFA530CNC Fully automatic band saw. The weight of these machines is twice that of most conventional machines with similar performance. By lowering the center of gravity, it paves the way for stable performance. Kslhcdwstumdio Ijlp Technical data: ● Cutting range: circular 30-530mm rectangular width height 30x30-530x530 ● Work table load: 4000 kg ● Belt dimensions: 67x1.6x6670 mm ● Belt speed: 15-120 m/min inverter ● Belt tension: hydraulic ● Power supply: 400V ● Minimum cutting length: 10mm ● Control: CNC ● Power requirement: 13 kW ● Machine weight: 6,3t

Condition: used, Year of construction: 1999, Technical specifications: X-axis travel range: 2500 mm Kljlhcdwsv Sbdve Iop with repositioning: 5000 mm Y-axis travel range: 1550 mm Z-axis travel range: 300 mm Max. table load weight: 330 kg X/Y axis speed: 80 / 80 m/min Simultaneous axis speed: 113 m/min Laser power: 2000 W Max. sheet thickness: 12 / 6 mm Width, approx.: 2300 mm Height, approx.: 1600 mm Weight, approx.: 6800 kg

Condition: used, Year of construction: 2002, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 6.200 h total power requirement 6.0 KW weight of the machine ca. 4850 kg Klslhov Rgv Uecdw Iep range L-W-H 3458 x 2450 x 2450 mm In good condition With only approximately 6.300 operating hours (!!) Equipment: - OPERATEUR 2 CNC control with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand-held control unit for manual axes movement * Pivoting control panel, front left - AMADA/PROMECAM quick clamping system for upper tool * 1x set of offset upper tools (split) - AMADA/PROMECAM lower tool holder * 1x set of 4V universal dies (split) * 1x set of 2V dies (split) * 1x set of AMADA tool holders - LAZER SAFE safety device Front - Side guards (swinging doors) - Rear guards (swinging door) - 2x AMADA sturdy front support arms - CE marking - 1x freely movable foot switch - Original operating instructions

Condition: good (used), Year of construction: 1989, Functionality: fully functional, Hydraulic press brake AMADA STPC 160/30 Yom 1989 Klslhcdov Rcc Row Iop CNC Controller DNC 7000 Max Cap : 1600kN Working length : 3000mm tooling included

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, Model: Amada EMZ 3610 NT electric punch, 45 Station Turret with 4 Auto indexing units Year: 2006 Frame Construction: Bridge Type Press Capacity: 30 tonnes (196kN) Press Type: High speed AC servo direct twin drive Axis Traverse Distance: 1525 x 2500mm Workable Maximum Sheet Size with Auto Positioning: 1525 x 5000mm Max. Material Thickness: 4.5mm mild steel Max. Material Weight: 150Kg Max. Hole Diameter: 114.3mm No. of Stations: 45 Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) 2 x E (Max Dia 114.3mm) Auto Indexing: Kslhcjv Schijdw Islp 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) Axis Speed X / Y: X 100m/min, Y80m/min Hits per Minute: 500 min (5mm stroke, 25.4mm pitch): 780 min (5mm stroke, 1.0mm pitch): 1800 min (1.4mm stroke, 0.5mm pitch) Turret Speed Bi-Directional: 330 RPM Punching Accuracy: +/ – 0.1mm Positioning Repeatability: +/ – 0.07mm Ram Stroke Length: 37mm Tool Lubrication: Air Blow System Axis Drives: AC Servo Motor Electric Power Required: AC200V 3-Phase 5-/60Hz, 27kVA Air Pressure Required: 5.0 Kgf/cm² Machine Length 5423 mm Machine Width 5120 mm Machine Height 2318 mm Machine Weight 24,500 kg Standard Equipment: Safety Lightguards Model Of NC: AMNC Touch Screen Data Interface: Networkable

Condition: like new (used), Functionality: fully functional, machine/vehicle number: H0634B-VIP1B-00A, Electronic card Brand: Amada Model: H0634B-VIP1B-00A CONTROL CARD FOR PLCS MODULE MACHINE CONTROL PC PLC CARD From machine: Amada cnc punching machine model Vipros 255 Kelhcork N Nxjdw Ielp

Condition: excellent (used), The machine is in good technical condition, after prior agreement it is possible to test it. Suitable for cutting metals, low cutting edge angle for minimal deformation and a cut without burrs, working width 3300 mm, electric back gauge + electric conveyor belt, machine in very good technical condition Klelsv R H Epehcdw Ijp

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING LARGE AMOUNT OF WILA TOOLING Maximum press force 2200 Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15200 Colour AMADA std. Klolhsv Rw Rijcdw Ijp Including optional symmetrical protection with light barrier Length overall +/- 10 mm 4510 Depth overall +/- 10 mm 2810 Weight approximate 15350

Condition: used, Year of construction: 1996, pressure 100 t chamfer lenght 3110 mm distance between columns 2700 mm column arm 400 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec table width 90.0 mm table height 960 mm oil volume 115 l 0 287 bar controlled axis 8 Anzahl Number of working hours 17.575 h total power requirement 7.5 KW weight of the machine ca. 6750 kg. range L-W-H 3680 x 2185 x 2635 mm very good / well-maintained condition (!!) with only 17.575 operating hours - in checked condition - machine video - ?v=BXxlx7s8sYY Equipment: - CNC electro-hydraulic press brake - CNC control AMADA OPERATEUR - CNC controlled 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) - swiveling control panel, front left - CNC-controlled back stop adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - upper tool holder with wedge camber - side protective device (swivelling doors) - rear protective device (swivelling door) - 1x 2-hand control / 1x foot switch - CE marking - original machine documentation Klelhcdjva I Hmow Isp

Year of construction: 2010, Condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Kelhcdwov Rp Tcs Ielp

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 1642NHE1364V0189, back gauge travel distance Z-axis: 1,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, cutting length (max.): 3,000 mm, type of motor: three-phase motor, Equipment: documentation/manual, finger protection, Amada GPX 630 Professional Hydraulic Guillotine Shear For sale is an Amada GPX 630, a professional hydraulic guillotine shear in very good condition. The machine is robust, reliable, and offers advanced features for maximum productivity. The cutting angle and cutting gap are adjusted fully automatically via the pre-selected program (99 memory locations). The precision is very good, the cut is burr-free, and there is only a 0.2mm tolerance over 3000mm. We are parting ways with the machine because we no longer use it in our daily lives. We have only ever cut thin sheet metal of 0.5-1.5mm, mainly V2A, non-ferrous metals, and steel. The installed blades are reversed and currently cut smoothly and very cleanly, but they cannot be resharpened - they have reached their wear limit. A new set from, for example, UKB costs approximately €1,500, but due to the excellent cutting quality, a purchase is currently unnecessary. Technical specifications: Cutting length: 3050 mm Max. material thickness: Steel: 6.35 mm, Aluminum: 8 mm, Stainless steel: 4 mm Motor power: Pump 5.5 kW, Backgauge 0.55 kW Weight: Approx. 6500 kg Special features: Automatic adjustment: Cutting gap and cutting angle are automatically adjusted. Pneumatic collection unit: For efficient collection and handling of cuttings. Electronic control panel: Microprocessor-controlled with programmable cutting parameters and operating indicators. Robust and safe: Welded construction, guards for maximum safety. Further information can be found in the PDFs. Legal information: Sold as is, without any warranty. No returns. Information provided to the best of our knowledge; inspection recommended. The machine is ready for use, regularly maintained, and offers precise cutting performance for various materials. I am selling the machine as a commercial seller and will issue an invoice. The sale is made without any warranty. The stated price is net, plus statutory VAT. Delivery Terms EXW – (according to Incoterms® 2020) Klelovw Ukashcdw Ijp This machine will be made available to the buyer EXW from the site. Availability: The seller will make the machine available, cleared and accessible, for collection. Disassembly, loading, and transport are carried out exclusively by the buyer at his own expense and risk. Transfer of Risk: Risk is transferred to the buyer upon provision of the machine at the specified location. Insurance, equipment, permits, and any necessary protective measures are the sole responsibility of the buyer. Liability: The buyer is liable for damages during installation. The seller will not provide any equipment or personnel unless specifically agreed in writing.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, laser power: 3,500 W, workpiece weight (max.): 920 kg, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, TECHNICAL DETAILS Laser power: 3,500 W Laser: Fanuc C4000 Connected load: 55 kVA X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Material capacity Max. material length: 3,050 mm Max. material width: 1,525 mm Max. table load: 920 kg Kolhcdwjv Rd I Ue Islp Control system Control type: AMNC-F MACHINE DETAILS Total power requirement: 30 kW Machine weight: approx. 8.2 t Space requirement: approx. 10,000 x 2,900 x 2,200 mm

Condition: like new (used), Year of construction: 2011, operating hours: 25,911 h, machine/vehicle number: LC 2415 ALPHA IV NT, AMADA LC 2415 ALPHA IV NT Laser This AMADA LC 2415 Alpha IV NT laser cutting machine was manufactured in mid-2011 and has 25,911 production hours. It is equipped with a Fanuc control unit. The machine has a laser power of 4 kW and includes the MP300 charger as an option. Overview Brand: AMADA Year: 2011 Model: LC 2415 Alpha IV NT Production Hours: 25,911 Application Type: Cutting Kljlhcdsvzbi Dsw Iop Location: Madrid, Spain Machine Type: CO2 Laser Cutting Machine Availability: Available Control Unit Brand: FANUC OTHER DATA Power: 4 kW Recently Updated Turbos CO2 Cutting Reaches the following thicknesses: 12MM IRON 6MM ALUMINUM 9MM STAINLESS STEEL Y-AXIS UP TO 1500MM X-AXIS UP TO 2500MM WITHOUT REPOSITIONING OR INFINITE WITH REPOSITIONING You can watch it live at the following links: ?si=56kLeQIC25Yirtg5 ?si=VEAkhXDgKziCS5wv

Condition: good (used), Year of construction: 2007, operating hours: 13,800 h, Functionality: fully functional, AMADA ASTRO II 100 NT bending cell Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Condition: used Klelhjv Imu Eecdw Iop Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm

Condition: good (used), Year of construction: 2001, The machine is in good technical condition, after previous agreement the possibility of testing. Koljv N Rp Aohcdw Ijlp

Year of construction: 2009, Condition: ready for operation (used), A CNC CO2 laser cutting machine Amada with automated storage system LKI is available. 1) Laser power: 4kW (4000W), travel X/Y/Z: 3100mm/1550mm/100mm, max. table load: 920kg, max. material thickness steel/stainless steel/aluminum: 20mm/12mm/10mm, laser system dimensions X/Y/Z: approx. 10000mm/4300mm/2100mm, weight: approx. 11000kg. 2) Pallets: 8, cutting pallets: 2, raw material: 2/3, unloading: 4/3, max. unloading height: 2200mm, max. material dimensions X/Y: 3050mm/1525mm, min. sheet dimensions: 2000mm/1000mm, height: 5400mm. Documentation available. On-site inspection is possible. Klslhcjv Rp S Ssdw Ijp

Condition: ready for operation (used), Year of construction: 2012, operating hours: 53,670 h, Functionality: fully functional, machine/vehicle number: 067, laser power: 4,000 W, type of input current: three-phase, sheet thickness (max.): 12 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, Equipment: cooling unit, documentation/manual, safety light barrier, AMADA Alpha 4 CO2 Laser – Used, Compact & Powerful We are selling a good used CO2 laser with semi-flying optics, combined cooling and extraction unit, and everything needed for operation (except process gases). Since we hardly use it anymore, we want to part with it and make room. The system is extremely compact and fit perfectly into our very cramped barn building. The X-axis has a re-gripping option, which allows for the processing of "infinitely" long parts. Blanks can be removed via the parts flap. The cutting quality is outstanding and impresses us every day – kudos to the engineers! Thanks to the long travel of the Z-axis, we were also able to process control cabinet doors for electrical control cabinet construction using a fixture. However, we mostly cut thin sheet metal (stainless steel and aluminum) up to 3mm. Here, the system is extremely fast and efficient. The Turboblower is still fairly new, with just 3,565 operating hours (out of 24,000 hours). The light barrier is still in place, along with all the deflection posts. We operated the system with a combination of a self-built safety fence and a light barrier on the loading side. We are the second owner – our predecessor unfortunately severely damaged the front table area, but that didn't bother us, as the machine works perfectly. It has always been professionally serviced annually. All axes are free of play (the Y-axis was completely replaced in 2022). Maintenance costs are significantly lower than those of a flatbed laser, as fewer mirrors are installed. The fewer mirrors mean the beam quality is extremely good, and the cutting quality is also correspondingly good (ideal for the medical sector). The compact and solid construction resembles an indestructible tank – accordingly, the machine will continue to do its job for tens of thousands of hours! Viewing and test cutting are possible at any time by appointment. Machine weight approx. 7700 kg Combination unit approx. 2200 kg Transformer approx. 700 kg Other technical data can be found in the attached PDFs. The operating instructions can be sent to you separately via email. The workstation license for the "VPSS4i Blank Solution" is also available and can be purchased separately. The new price at the time was €20,150 net; I would offer this for an optional €10,000 net (the license transfer has already been agreed upon with AMADA and is easily possible). The system is still in operation, so the operating hours may vary until the sale (as of February 5, 2025). Purchased as is without warranty or guarantee. An invoice including VAT will be issued. Delivery terms EXW – Amada Alpha 4 (according to Incoterms® 2020) The Amada Alpha 4 laser cutting system will be made available to the buyer EXW from the site. Klolhcdovw Ufwow Iop Provision: The seller will provide the system cleared and accessible for collection. Disassembly, loading, and transport are carried out exclusively by the buyer at its own expense and risk. Transfer of risk: Upon provision of the machine at the specified location, the risk is transferred to the buyer. Insurance, equipment, permits, and any necessary protective measures are the sole responsibility of the buyer. Liability: The buyer is liable for any damages incurred during installation. The seller will not provide any equipment or personnel unless specifically agreed upon in writing.

Condition: excellent (used), Guillotine shears Amada GPX 630 made in France Manufacturer: Amada Kjlhcsv Immnedw Islp Type: GPX 630 Condition: used cutting length max: 3050mm normal steel: 6,35 mm NC backgauge: 1000mm number of hold-downs: 16 housing dimensions: 3750 x 2000 x 1850 mm weight: ~ 6500kg Scope of delivery: guillotine shear Amada GPX 630

Condition: good (used), Year of construction: 1996, The machine is in good technical condition, by prior agreement the possibility of testing. 83 300 working hours Kelhsv N Rpvjcdw Iolp

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Motor power: 5,5 KW Klelev Immhshcdw Iep Weight: approx. 3300 kg

Condition: good (used), The machine is in good technical condition, testing is possible after prior agreement. Maximum pressing force 500 KN Maximum stroke 200 mm Weight 4700 kg Expected power 6 kW Klolev N Rmnshcdw Iop