Used Amada Emz for sale (222)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, number of axes: 2, This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Press force: 300 kN • Travel distance with repositioning (X/Y): 5000 mm / 1525 mm • Max. material thickness: 4.5 mm • Travel speed (X/Y): 100 m/min / 80 m/min Helhcdwjx Enlxs Iofg • Axis speed: 128 m/min • Positioning accuracy: ±0.1 mm • Turret stations: 45 • Auto-index stations: 2x B / 2x C • Overhauled two years ago, and serviced by Amada every year • Turret speed: 30 rpm • Stroke rate: 1000 strokes/minOPTIONAL: Tools and high-quality spare parts, see photos (original price €80,000)

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) Hfjlhcdwsx D Hpqs Iog • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 37 mm, overall weight: 21,500 kg, total height: 2,342 mm, number of axes: 4, This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Additional equipment • Air-blow oil-mist lubrication • Slug-vacuum system • Digital tool ID / barcode system • Integrated tapping: inch/metric taps (M2.5–M8) • Marking & deburring tools: on-board marking and deburring options Machine Benefits Technical Machine Benefits • Type: high-speed servo-electric turret punch press with twin ac servo direct drive • Press capacity: 33 tons (300 kn) • Maximum sheet format (without repositioning): 3050 × 1525 mm • Turret type: “king” turret – triple-track, available in 55-station multi-purpose or 58-station version, with 4 auto-index stations including tapping units • Turret rotation speed: up to 30 rpm • Feed clearance: 25 mm between turret plates • Max sheet thickness: 4. 5 mm • Positioning speed (x/y): 100 m/min / 80 m/min Extra Information Machine still under power Dimensions Machine Depth 5436 mm Hfjlhcdwsx Nrktj Isg

Year of construction: 2010, condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Hslhcjv Rp Tcsdw Iofg

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1200 mm distance between columns 1050 mm Stroke beam 100 mm max. opening beam/table 370 mm C-recess 320 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec Hfelhcdoy R Egwew Isg opening speed 80 mm/sec Number of working hours 24000 h length 1600 mm width 1200 mm height 2000 mm weight 2650 kg total power requirement 2,5 kW dimensions of the machine ca. 2x1,5x2 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Hfelhcdsvwcduew Ieg Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Year of construction: 1990, pressure 25 t chamfer lenght 1250 mm distance between columns 970 mm Stroke beam 100 mm max. opening beam/table 270 mm C-recess 150 mm max travel X-axes 420 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 10 mm/sec opening speed 100 mm/sec length 1500 mm Hslhcdjy Ruw Esw Ijfg width 1000 mm height 2000 mm weight 1200 kg total power requirement 4 kW dimensions of the machine ca. 1,5x1,0x2 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: ready for operation (used), Year of construction: 2018, laser power: 3,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, total height: 5,170 mm, number of axes: 3, This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2018. It features a powerful 3000 W fiber laser and a travel range of 3070 x 1550 mm. The machine includes a nozzle changer with 16 stations and a water chiller for efficient cooling. If you are looking to get high-quality cutting capabilities, consider the AMADA ENSIS 3015 AJ machine we have for sale. Contact us for further details. • Laser power (oscillator plate): 3.15 kW • Control unit: AMNC 3i (21.5" screen) • Power required: 10.4 kVA • Voltage: 200V AC (3-phase) • Frequency: 50/60 Hz • Mass of machine: 400 kg (oscillator unit) • Nozzle changer: 16 stations Additional equipment • Automation: AMADA ASF 3015 S (ASF EU automation) • Total pallets: 12 (including cutting pallets) • Cutting pallets: 2 • Raw material pallets: 7 • Unloading pallets: 3 • Max. sheet weight: 920 kg • Max. load capacity per pallet: 3000 kg • Max. sheet dimensions: 3050 x 1550 mm • Min. sheet dimensions: 2000 x 1000 mm • Sheet thickness (auto mode): 0.8–25 mm • Machine height: 5.3 m • Electrical connection: 3 x 400V AC + N + PE / 40A • Compressed air: 6 bar, 1000 l/min • Features: 2nd unloading station included, hinge belt conveyor SRF 063 for scrap transport Hfjlhcsy N U Alodw Isg • X-direction conveyor • Cooling system: Water chiller VBOXX 15B • Extraction system: Dust collector DC1500/8/9 SB • ADSS Basic • Water assist cutting system • Profibus for loading/unloading • Water demineralizer: Type S & Type B5 • Included software: VPSS3i Blank Solution Pack

Condition: used, Year of construction: 1994, functionality: fully functional, Amada Apelio II 357 CNC Laser Punch Combination Machine Amada Apelio II 357 CNC laser punch press combination machine manufactured in Japan. Heavy duty industrial sheet metal processing system combining turret punching and laser cutting capability in one machine. Model: AP357F1C Manufactured: 1994 Helhcdoy Sgu Sjw Iefg 30 Ton punching capacity 1.5kW laser capacity 44 turret stations Approx. machine weight: 15 ton Fitted with: Amadan OSP-LA control system CNC programmable controls Integrated laser cutting system Automatic turret punch system Large sheet capacity table Multi station turret Extraction and filtration system Industrial electrical cabinet Safety guarding and interlocks Suitable for: Sheet metal fabrication Precision punching Laser profiling Production manufacturing Engineering workshops HVAC and enclosure production Machine is complete and was previously in industrial production use. Normal cosmetic wear consistent with age and workshop environment. Ideal opportunity for fabrication companies or export buyers seeking a high capacity Japanese built CNC laser punch combination machine. Loading assistance available. Inspection welcome. Transport can be arranged. Open to reasonable offers.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Holhcdjy Sbu Hjw Iofg Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. Hjlhcsw Iq Ugjdw Iofg - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 210 mm, spindle motor power: 7,500 W, number of axes: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details. • Axes: X1, Z1, C1, X2, Z2, C2 • Travels: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (double front spindle), max speed 4000 rpm, power 7.5 kW (option 11 kW), high-acceleration spindle • Turrets: 2 × 12 stations • Chuck size: 8" (3-jaw, both spindles) • Bed: High rigidity monoblock design • Cutting performance: • Turning (S45C): depth of cut 1.6 mm; feed 0.22 mm/rev; cutting speed 160 m/min Helhcdwey Ndu De Iefg • Drilling: Ø22 mm; feed 0.56 mm/rev • Tapping: M16 • Grooving: up to 8 mm • Precision: positioning accuracy ±2 µm; repeatability ±2 µm • Coolant/system: 290 L tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automated; designed for unmanned, high-volume production • Driven tools: Yes, for both spindles • Condition: Good, properly working; regular maintenance since 2008 Additional equipment • Gantry loader with reverse turn unit • Work stocker: 2 units (expandable to 4) • Chip conveyor • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Hfslhcdwey Rtf Uj Ieg

Condition: used, Year of construction: 2004, operating hours: 26,000 h, functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Made in France. Hjlhcdst Hg Acjw Ijfg Operating time in hours: 26 426 Hours of power: 65 006 Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 45,000 h, For sale is a reliable and robust CNC press brake from Amada, model HFP 50-20. The machine is currently still in operation and can be inspected and tested under power at any time. The photos show the actual condition. The machine appears well-maintained, clean, and complete. Of particular note is the modern AMNC control unit with color display, which enables comfortable and precise operation. Hfolsy Rh Iwohcdw Ijg --- Technical data: - Pressing force: 50 t (500 kN) - Working length: approx. 2,000 mm - Year of manufacture: 2006 - Stroke: 200 mm - Weight: approx. 4,700 kg - Voltage: 400 V / 50 Hz - Operating hours: approx. 45,000 h Equipment and condition: - CNC control AMNC (color display, see pictures) - Machine runs smoothly and reliably - Safety enclosure present (see pictures) - Foot pedal and control unit complete - Inspection log available - Regularly in use Overall, a solid and proven industrial machine, ideal for workshop or production environments. --- IMPORTANT: - Sale does not include any tooling --- Inspection / Collection: - Test run possible at any time - Loading can be supported - Location: 94244 Teisnach

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: HFBO 125 30 H40402, stroke length: 3,000 mm, Fully refurbished in 2019, AMADA PROMECAM 125.3 press brake, year of construction 1994. Excellent Condition. Hfjlhcdwsy Nibcs Iog If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Sheet width: 2,500 mm Sheet thickness: 4 mm Machine weight approx.: 5,000 kg Space requirement approx.: 3,000 x 2,000 x 1,700 mm Accessories/equipment: - Sheet holding device - Angle stop - 3x support arms - Foot switch Hfelhcoyz Rv Eodw Iog - Light barrier

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Holhcdoxu Nc Iew Isfg Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Hjlhceycf N Iodw Iefg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 41,569 h, machine/vehicle number: 77510200, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC 3i, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser source model: C4000, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, On behalf of an authorized party, we are offering the following used item for sale by bid: Amada CO² Laser Cutting Machine Model FO-3015 NT II RI Laser Machine FO-3015 II RI Model: FOM2RI3015-C4 Operating hours: 41,569 h Laser specifications: 4,000 W CO2 Laser / Flying Optics Working area (X x Y): 3,070 x 1,550 mm Controller: AMNC 3i (21.5" screen size) Serial No.: 77510200 Year of manufacture: 2013 Including transformer TG513 Serial No. 987 Including cooler-extraction combination PC5011FOm24kw Serial No. 7196850001 LST3015 RI pallet changer for FOM23015RI LSTRI3015-CL Serial numbers: (30153398) Full demineralization unit type B5 Serial No. 31164908 with cartridge and conductivity meter Other condition notes: Hfelhcsy Iwixjdw Isg Last maintenance by Fanuc: 05.01.2023 at 38,095 h - Replacement of O-rings on the laser tube - Replacement of internal mirrors Turbo blower replaced at 24,000 h - Next replacement due at 48,000 h RI unit pneumatic valves partially leaking, inspection required Including various light barriers and a safety fence for the loading and unloading area Price is ex works/collection. The item is located in Erftstadt and must be collected by the buyer at that location. This offer refers exclusively to the described item. Other items possibly shown in the pictures may be part of a different offer. Errors subject to change. Inventory number: 2893-82

Condition: ready for operation (used), Year of construction: 2009, operating hours: 11,979 h, pressing force: 224 t, stroke length: 200 mm, overall weight: 17,100 kg, number of axes: 4, This 4-axis AMADA HFT 220-4 was manufactured in 2009. It features a maximum press force of 2200 kN and a maximum stroke of 200 mm, making it suitable for various bending applications. The machine comes with an extensive inventory of press brake tooling, including punches and dies stored in dedicated cabinets. If you are looking to get high-quality bending capabilities, consider the AMADA HFT 220-4 press brake we have for sale. Contact us for further details. • Noise level: < 75 dB(A) • Voltage: 400/415 V • Frequency: 50 Hz Hfolhcdjy E S Hyew Ieg • Number of phases: 3 • Foreseen power: 20 kW • Nominal current: 351 A Additional equipment • Optional: Extensive inventory of press brake tooling (punches and dies) • Dedicated tool cabinets and racks for tooling Technical Specification Bending Length 4000 mm

Condition: good (used), functionality: fully functional, Press Brake Brand: AMADA Model: HFT 80/25 Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Hfolhjwivddjcdw Ieg Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Equipped with new and used tooling

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Hfjlhcoxfbb Rjdw Ijg Back gauge: 1000 mm Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: excellent (used), Capacity 2000 x 4 Overall dimensions 3000 x 2000 Rear sheet support Hfelhcdouml R Esw Iog

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, table load: 920 kg, This AMADA ENSIS-3015 AJ was manufactured in 2019. A fiber laser cutting machine, it represents a reliable option for precise cutting tasks. Consider the opportunity to buy this AMADA ENSIS-3015 AJ fiber laser cutting machine. Contact us for more information. Machine Benefits Technical Machine Benefits Hfelhcjy Eytnsdw Iog • Laser power: 6,3 kw • Resonator: ensis 6000 • Positioning speed: 170 m/min • Operating time 19588 / cutting time 10631h Extra Information Machine in very good condition and under power