Used Amada Pega 244 for sale (221)

Condition: good (used), Year of construction: 1987, operating hours: 42,846 h, machine/vehicle number: P2440355, CNC turret punch press with 24 stations Control: FANUC 6M Operating hours: 42,846 h Spindle motor: 5.5 kW Capacity: 20 tons Number of stations: 24 Hnsdpfx Ahexqr Sqj Njg Material thickness: 6.35 mm Hole size: 88.9 mm Sheet size WITHOUT REPOSITIONING: 1000 x 1000 mm WITH 1 REPOSITION: 2000 x 1000 mm Max. sheet weight: 50 kg Speed: 30 rpm Stroke rate: 200 strokes per minute Net weight: 8,500 kg Dimensions (L x W x H): 4,500 x 3,200 x 2,200 mm

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Amada, _____ Description: Year of manuf. : 2022 Material: Round material:Ø 20 -101.6 mm Rectangular material:20 - 80 mm Cut length:10 - 6,000 mm Saw blade: Design:Disposable carbide saw blades Dimensions:Ø 360 x 2.0 mm Saw: Cutting speed:automatic control Revolutions:55- 180 Feed rate:0 -30 mm/sec Drive power:11 kW x 4P Horizontal clamping pressure:15.2 kN Vertical clamping pressure:3.9 kN Feed system: Drive system:AC servo + ball screw Feed length:715 mm Feed speed:30 m/min Bar loader: Max. diameter:100 mm Hnodpfx Aeyad A Uoh Nog Standard length:6,500 mm Magazine extension:By 2,000 mm Sorting section:With 2 switches Equipment: Material feed:Bar feeder Chip disposal:Chip conveyor Emulsion mist separator:Air Champion

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Hnsdpfxow Iq Ugj Ah Njg Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,941 h, controller manufacturer: FANUC, controller model: n/a, overall weight: 21,000 kg, number of axes: 3, This 4-axis AMADA EMZ 3510 NT was manufactured in 2010. It features a punching capacity of 300 kN and includes 45 turret stations. With a power requirement of 27 kVA and a weight of 21000 kg, this CNC punch press is robust and efficient. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3510 NT machine we have for sale. Contact us for more information about this machine. Additional equipment • Power Required: 27 kVA • Noise Level: 91 dB (A) Machine Benefits Technical Machine Benefits • Stopping distance: 360 mm • Capacity: 300 kn Hedpfox Hlh Hex Ah Nong Extra Information Machine still under power

Condition: used, Year of construction: 1991, Press Brake Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Max. pressing force: 1,250 kg Max. stroke: 180 mm Sheet thickness: 8 mm Working width / throat: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Hjdpfex Tzl Iex Ah Njng Rated current: 24 Weight: 9,900 kg Availability: immediately

Condition: like new (used), Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of production: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8 AXESL configuration) Press force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Hnedpfx Ajx Trw Ish Njg Bending angle measurement: digital angle sensor Stroke: 'Long Stroke' (extended) Connected load: 20 kW Operating hours: 10,238 h Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: Very large number of tools

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm Hnedpfxovn D Tfe Ah Nog 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Hodpfx Ahjx I T Dxj Neng Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 19,951 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: AMADA, bending force (max.): 170 t, working width: 3,000 mm, stroke length: 200 mm, number of axes: 6, type of crowning: CNC-controlled, overall weight: 11,600 kg, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, The Amada HFE 170-3 is a hydraulic press brake with a 170-ton bending capacity and approximately 3 m working length. Designed for precision and reliability, it is suitable for industrial sheet metal bending applications and features robust European construction. The press brake is under power, tools are available with machine. Press brake is equipped with Y1/Y2/X/R/Z1/Z2 axis. Hnedpfxex Upt No Ah Njg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,000 h, controller manufacturer: AMADA, controller model: AMNC-3i, This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2021. It features a high-capacity 9000 Watt fiber laser, capable of cutting up to 25 mm thick mild steel, stainless steel, and aluminum. The machine includes an automatic pallet changer, NC-focus control, and a 21.5” touchscreen AMNC-3i control system. Ideal for precision cutting, consider the opportunity to buy this AMADA ENSIS 3015 AJ. Contact us for more information about this machine. • Type: AMNC-3i • Screen: 21.5” touchscreen • Operating system: Windows 7 • Laser source: Laser diode-pumped fibre laser • Type: AJ-9000 • Laser power: 9000 Watt • Laser wave length: 1.08 µm • Stability: +/- 2% • Pulse frequency: 1–10000 Hz • Duty range: 1-100% • Working range: 3070 mm x 1550 mm • Positioning speed: 170 m/min • Table loading weight: 920 kg • Mild steel: 25 mm • Stainless steel: 25 mm • Aluminium: 25 mm • Brass: 18 mm • Copper: 12 mm • Machine weight (without pallet changer): 9500 kg • Automatic pallet changer • NC-focus control Hodpfx Ajx Uxkwsh Nong • Oil spraying function • Nozzle changer (16 nozzles) • Sensor cutting head • Diode for positioning • Cutting process monitoring • Safety device • Conveyor belt • Transformator • Cooling unit • Dust collector • Control panel pallet changer

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Amada CNC-controlled turret punching machine, type VIPROS 368 KING. The machine is equipped with a loading system type PR 300 and an unloading system type MP 300. Hnodpfx Ahjx Sq Ipo Neg

Condition: refurbished (used), Year of construction: 2014, operating hours: 5,675 h, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, feed length X-axis: 450 mm, workpiece weight (max.): 1,000 kg, feed rate X-axis: 5 m/min, grinding wheel diameter: 355 mm, type of input current: three-phase, grinding wheel width: 50 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 300 rpm, overall weight: 5,000 kg, distance stand to spindle center: 500 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 2 m/min, power: 7.5 kW (10.20 HP), input voltage: 400 V, feed length W-axis: 1,000 mm, grinding wheel bore: 127 mm, Equipment: documentation/manual, CNC Surface grinder AMADA Techster 84 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC series 32i-B Maximum grinding lenght x width: 800 x 400 [mm] W axis travel (longitudinal axis): 1000 [mm] Min. Stroke speed W axis: 0.1 [mm/min] Max. Stroke speed W axis: 40000 [mm/min] X axis travel (transverse movement): 450 [mm] Min. Stroke speed X axis: 0.1 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis (vertical movement): 500 [mm] Min. Stroke speed Y axis: 0.1 [mm/min] Max. Stroke speed Y axis: 500 [mm/min] Resolution Y axis: 0.0001 [mm] Max. distance spindle nose / table: 500 [mm] Max. load on table: 1000 [Kg] Min. grinding wheel speed: 300 [rpm] Max. grinding wheel speed: 2500 [rpm] Grinding spindle motor power: 7.5 [kW] Max. diameter grinding wheel: 355 [mm] Max. grinding wheel width: 50 [mm] Grinding wheel bore: 127 [mm] Number of running hours: 5675 [h] Supply voltage: 400 [V] Total power required: 23 [kVA] Weight : 5000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 SAV electro-magnetic chuck, type AH-243.73 P4 – dimensions: 600 x 400 [mm] x1 automatic grinding wheel balancing device MPM, type BM50 + AB50.SM4 x1 automatic measuring probe with compensation function 1x rotary dresser 1x NC swivelling rotary dresser 1x static straight dresser x2 linear glass scales on both X and Y axes x1 paper tape filtration unit ARO TECHNOLOGIES AG, type PRA0025874 x1 oil chiller DAIKIN AKZ149M133 x1 oil mist extractor IFS, type IFMC 1100 3x wheel flanges x4 grinding wheels Hnedpfx Ahsx Sd H Ss Njg x1 set of service tools (wrenches) x1 transformer x1 set of technical manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands like Okamoto, Jones & Shipman, Jung, Favretto, Blohm, Studer. Also see cylindrical grinders, lathes, machining centers, and milling machines

Condition: ready for operation (used), 300/100T • Force: 100 tons • Bending length: 3000 mm • 6 axes • Control: AMADA • Year: 2006 • Complete documentation For further information, please contact us Hjdpfxex Tv Evs Ah Neng

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex location: CNC press brake Amada Promecan Type HFBO 125/40 Year of manufacture: 1991 Control system renewed in 2024 Control: Delem DA 58 Pressing force: 125 t Hsdpfxex Tq Ewj Ah Nong Working length: 4200 mm Distance between uprights: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive power: 11 kW Working speed: 8 mm/s Weight: 10 t Numerous tools included Price: EUR 12,500 plus VAT, ex location

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 24550616, overall weight: 7,000 kg, total height: 1,900 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 1,200 mm, table length: 2,450 mm, AMADA ARIES 245 CNC Punching Machine - Punching force: 200 kN - Power connection: 11 kVA - Includes accessories such as various punches and punching tools Hnsdpfx Asxw Tt Noh Nsg Attention: The item must be collected definitively between 19 and 23 January 2026 on a specific date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), Year of construction: 2012, operating hours: 15,279 h, controller manufacturer: AMADA, number of axes: 6, overall weight: 8,100 kg, total height: 1,988 mm, pressing force: 133 t, product length (max.): 4,755 mm, This 6-axis AMADA HD 1303 NT press brake was manufactured in 2012. It features a press capacity of 1300 kN, a bending length of 3110 mm, and a stroke of 250 mm. With a throat depth of 420 mm and speeds up to 200 mm/s, it's designed for efficient operation. Consider the opportunity to buy this AMADA HD 1303 NT press brake. Contact us for more information about this machine. • Distance between uprights: 2700 mm • Stroke: 250 mm • Open height: 590 mm • Throat depth: 420 mm • Speeds: • Approach: 200 mm/s • Working: 12 mm/s Hjdpfox D Evpex Ah Njng • Return: 120 mm/s • Hydraulic system: Oil tank capacity 48 liters • Ambient temperature range: 0–40 °C Technical Specification Bending Length 3110 mm

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 28,138 h, bending force (max.): 100 t, number of axes: 7, CNC press brake Amada HFE 100-3 Manufactured in: 2006 Control system: AMADA OP 2000 Total hours: 28138 h Pressing force: 100 t Maximum bending lenght: 3100 mm Distance between frames: 2700 mm Stroke: 200 mm Axis: 7 Throat Depth: 420 mm Clearance: 470 mm Machine weight: 6750 kg Hedpfx Aex Tgr Hsh Nong Equipment: Amada DIGIPRO angle measuring system

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 388 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Hjdpfjx Tft Ajx Ah Nong

Condition: good (used), Year of construction: 1990, throat depth: 420 mm, distance between stands: 1,530 mm, overall weight: 3,450 kg, total length: 2,100 mm, total width: 1,400 mm, total height: 1,900 mm, pressing force: 50 t, Bending length 2050 mm, capacity 50 to, gap between column 1550 mm, stroke 200 mm, throat gap 300 mm, motor 5 KW, back gauge motorized, dimension 2100x1400x1900 mm, weigth ca. 3450 kgs Hnodjv Axpwjpfx Ah Njg

Condition: used, CNC punching machine AMADA ARIES 245 with CNC control AMADAN 04PA Punching capacity: 20 t Machine weight: 7,500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Hedpsx Rp Uxefx Ah Nong

Condition: good (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: C971109, controller manufacturer: AMADA, controller model: PROMECAM, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 10,000 kg, total length: 4,500 mm, total width: 3,500 mm, total height: 2,800 mm, AMADA GPX 630 Guillotine Shear - Power supply: 5.5 kW - Max. backgauge travel: 160 mm - Including left stop Hodpfsxw T Iaox Ah Neng - Backgauge length: 3200 mm - Cutting length: approx. 3050 mm Note: The item must be definitively collected between 19 and 23 January 2026 on a date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: good (used), Year of construction: 2009, functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Saw blade dimensions: 34 x 1.1 x 3505 mm Hodpfx Ahsv T Tglj Neng Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences CNC electromechanical backgauge Travel speed: 100 mm/sec Hnodpfx Ajxwmyceh Njg CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Hnodpfx Ahjvb Ubye Nsg Extended machine accessories - TSU tool changer 300 Automation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, AMADA CNC Laser Cutting Machine Type: ALPHA Laser LC 2415 III Year of manufacture: 2001 Laser power: 3000W CNC control: Fanuc Series 160i-L Hnsdpfx Aexv Skdsh Nog Table length: 5040 mm Table width: 1550 mm Sheet thickness up to 12 mm Table load up to 330 kg Travel path X: 2520 mm Travel path Z: 300 mm Travel path Y: 1550 mm Cutting speed: 20 m/min Rapid traverse speed X/Y/Z: 80/80/60 m/min Positioning accuracy ±0.01 mm/500 mm Repeatability ±0.005 mm Compressed air: 6/20 bar Drive: 10 kW Weight: 6.6 t Complete accessory set