Used Amada Ha 400 for sale (221)

Condition: used, For sale is the bandsaw shown in the photos, manufactured by the Taiwanese company Amada, model HA 400 W from 2001. The machine was imported from Germany. It is fully operational and works in both automatic and manual modes. Loading of the machine on site is provided. Technical specifications: Maximum cutting diameter: 400 mm Feeder length: 600 mm Blade size: 4570 x 32 x 1.06 mm Cutting speed range: 15 - 90 m/min Podpfoxfwmpex Adnegw Motor power: 5.5 kW Year of manufacture: 2001 Weight: 2000 kg

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 44650046, saw band length: 4,570 mm, saw band width: 41 mm, cutting height (max.): 400 mm, saw band speed: 1,500 mm/s, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges collection within the period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Cutting capacity round material: Ø 406 mm Cutting capacity square material width: 400 mm Cutting capacity square material height: 400 mm Maximum machine load capacity: 2,500 kg Maximum roller conveyor load capacity: 2,000 kg/m Min. workpiece remnant length ensuring clamping edge: 76 mm Min. workpiece remnant length without workpiece detection: 30 mm Pgjdpfswvhxajx Adnsw Saw blade dimensions: 41 x 1.3 x 4,570 mm Cutting speeds: 15 to 90 m/min (50 Hz) Cutting speeds: 17 to 90 m/min (60 Hz) Clamping device pressure adjustment: 570 – 1750 N Cut-off length: 10 to 5,040 mm Increments: 0.1 mm Single feed: 570 mm MACHINE DETAILS Installation dimensions: 5,200 x 2,350 x 2,000 mm Weight: 2,950 kg Saw drive motor: 5.5 kW, 4 pole Hydraulic pump motor: 1.5 kW, 4 pole Coolant pump motor: 0.18 kW, 2 pole Connected load: 12.3 kVA Machine dimensions length: 3,006.5 mm Machine dimensions width: 3,288 mm Machine dimensions height: 2,564 mm Working height: 842 mm Hydraulic oil tank: 40 litres Cutting fluid tank: 120 litres EQUIPMENT - With technical documentation - Additional roller conveyor - Support length: approx. 2,000 mm - Total support length: approx. 5,040 mm

Condition: used, Year of construction: 1988, A fully automatic band saw with hydraulic material feed is for sale. Manufacturer: Amada Model: HA 250 Year of manufacture: 1988 Location: Bremen The machine was stored in fully functional condition as a backup unit in case another saw failed. It has not been used since and the warehouse is now being cleared. _____ Pjdexrtr Ispfx Adnegw Our general terms and conditions apply; in addition, the seller assumes no liability for typographical or data transmission errors. The information and images have been provided to us by the owner and authorized for publication. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the items offered are appropriate for their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm table height 450 mm cutting speed 10 - 110 m/min total power requirement 3 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Fully automatic band saw Pedpfsv Ehfajx Adnogw - including chip conveyor

Condition: good (used), Year of construction: 2009, functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Podjv T Tgljpfx Adnsgw Saw blade dimensions: 34 x 1.1 x 3505 mm Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Condition: good (used), functionality: fully functional, We are selling a used Amada CTB 400 (carbide-capable bandsaw) with 3m powered roller conveyor and 6m outfeed roller conveyor. Technical specifications: - Cutting capacity round: 430 mm - Cutting capacity square: 430 x 430 mm - Cut-off length: 5 - 9999 mm - Bandsaw motor power: 7.5 kW - Total power: approx. 10 kW - Saw blade dimension: 4715 x 41 x 1.3 mm (suitable for carbide) - Variable blade speed: 15 - 150 m/min - Feed length: 10 - 9999 mm Podewybkdopfx Adnsgw - Minimum remnant length: 15 mm - Dimensions (W x D x H): 2630 x 2740 x 2422 mm - Weight: approx. 4500 kg CNC control: Speed / Power Material / Cross-section Parallelism display Automatic parameter correction

Condition: excellent (used), Year of construction: 2012, Technical specifications: Working length: 4300 mm Distance between columns: 3230 mm Press force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Podpfx Adowl U Rhjnsgw Very good condition, approximately 30,000 hours The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2008, operating hours: 12,866 h, condition: ready for operation (used), General Data Machine weight 7500 kg Measurements height 2789 mm Main Drive Laser power 2 kW Control Unit Brand AMADA Pgedpfx Adsxy Thlenow Dimensions Machine Length 5745 mm Table Table load 330 kg This AMADA LC-2415 ALPHA IV was manufactured in 2008. A CO₂ laser cutter with a 2.0 kW power rating, it handles a working area of 4000 mm × 1550 mm. It can cut steel up to 10 mm, stainless steel up to 8 mm, and aluminium up to 3 mm. With a table load capacity of 330 kg and a total weight of 7.5 tons, it remains operational and testable. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,800 h, machine/vehicle number: 45561238, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser hours: 12,800 h, laser power: 2,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, power: 2 kW (2.72 HP), type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, Working area 2520×1550×300 mm Table load 330 kg Ball-screw drives Machine dims 5745×2630×2789 mm Psdpfexgmnfox Adnjgw Weight 7.5 t Selling due to buying a new, identical one

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, CNC Laser Cutting System AMADA Type: ALPHA Laser LC 2415 III Year of manufacture: 2001 Laser power: 3000W CNC control: Fanuc Series 160i-L Table length: 5040 mm Table width: 1550 mm Sheet thickness up to 12 mm Table load capacity up to 330 kg Travel path X: 2520 mm Pjdpfx Adexv Skdenegw Travel path Z: 300 mm Travel path Y: 1550 mm Cutting speed: 20 m/min Rapid traverse speed X/Y/Z: 80/80/60 m/min Positioning accuracy: ±0.01 mm/500 mm Repeatability: ±0.005 mm Compressed air: 6/20 bar Drive: 10 kW Weight: 6.6 t Complete accessories included due to company closure

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty. Psdexndynspfx Adnsgw

Condition: used, Offer 41414 Pgjdpfx Adsxhfhmonew Guide unit for punching tool suitable for AMADA type EMK 3612

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Pgsdpfx Aov Ip R Ajdnsw

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm Pgjdpovxwytjfx Adnew table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,800 h, machine/vehicle number: 45881238, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, power: 2 kW (2.72 HP), Equipment: CE marking, cooling unit, documentation/manual, dust extraction, nozzle changer, Working area 2520×1550×300 mm • Table load 330 kg • Ball-screw drives Max thickness: mild steel 10 mm, stainless 8 mm, aluminium 3 mm Podexgm Tzspfx Adnegw Machine dims 5745×2630×2789 mm • Weight 7.5 t

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Pjdpfjv S U Izex Adnjgw Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 15,707 h, laser power: 4,000 W, sheet thickness (max.): 12 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Laser power: 4,000 W X-axis travel: 2,520 mm Y-axis travel: 1,550 mm Z-axis travel: 300 mm Max. Sheet thickness: approx. 12 mm Table load: 330 kg MACHINE DETAILS Total operating hours: 39,777 h Operating hours: 15,707 h Cutting time: 8,326 h Machine weight: approx. 7,700 kg EQUIPMENT - AF400i-D control system - cooler - Extraction unit Pgedevc Ankepfx Adnsw - transformer - Light barrier

Condition: good (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,634 h, machine/vehicle number: 2415 022, Amada Alpha3 CO2 laser in working order with its automatic loading and unloading You can see it working Pjdev E Rttjpfx Adnogw

Condition: good (used), functionality: fully functional, operating hours: 12,921 h, Used AMADA press brake Model: HFP220-4S Capacity: 4000 x 220T Number of axes: 8 axes CNC: AMNC, retrofitted by AMADA in 2022 Fast working speed: 100 mm/sec Ram stroke: 200 mm Electrical power: 67 amps, 38.5 kW motor Pgjdpfx Ajxwtvdednsw Operating hours: 12,921h Machine tested and inspected by AMADA – report with photo Video on request Machine loaded onto truck

Condition: excellent (used), sheet width 2500 mm plate thickness 4 mm Control GPN Psdpfevwgpnjx Adnogw weight of the machine ca. 5000 t dimensions of the machine ca. 3000 x 2000 x 1700 m

Condition: good (used), functionality: fully functional, Amada mod. Togu-EU sharpening machine with PLC for sharpening punches and dies of punching machines complete with accessories. Pgedpfxet Daiwj Adnow

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  Pgsdpfxexzf T Aj Adnjw The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm MACHINE DETAILS Power consumption: 22 kVA Machine weight: 18,000 kg Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Amada Operator, bending force (max.): 320 t, stroke length: 350 mm, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Pgedpfsxwnxtjx Adnsw Bending length: 4,100 mm Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 18000 kg Clamping Unit Pgjdpfjxq Hugsx Adnjw Clamping force 2200 kN Opening stroke Max. 350 mm Main Drive Bending length 6000 mm Stroke 350 mm Pressing force 2200 Kn This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Application Types Bending

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm MACHINE DETAILS Machine weight: approx. 10,100 kg Pjdpfx Adjxxr H Rjnjgw EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system