Used Amada Pega 357 for sale (210)

Condition: used, Year of construction: 1995, operating hours: 29,777 h, functionality: fully functional, machine/vehicle number: 03670514, punching force: 30 t, total height: 2,315 mm, total width: 3,770 mm, total length: 5,471 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 1,830 mm, travel distance Y-axis: 1,525 mm, overall weight: 14,000 kg, table load: 120 kg, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, Condition and details as seen in the pictures. Video available, gladly sent by email. Lajdpfxsxb R Uxj Ab Ujh We look forward to receiving your price offers!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Lodpfx Absxn Rvie Uoah Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: ready for operation (used), controller manufacturer: Fanuc 16P, empty load weight: 10,000 kg, total length: 4,425 mm, total width: 2,800 mm, total height: 1,950 mm, Turret revolver with 16 + 3 x Auto Index Holders Punching pressure: 20 Ton Max sheet thickness by punching + nibbling: 6,4 mm Max punching dia: 88.9 mm Working range on cross-side (X-axes): 1270 / 2540 mm Working range along (Y-axes): 1000 mm Lasdpfx Asxqh Twsb Ueh Toolchanger: Yes Number of toolpositioners: 19 positions Power needed: 25 kva

Condition: good (used), functionality: fully functional, Year of construction: 1990, Hydraulic press brake Control: Ema 5 Controlled axes: 5 Pressing force: 100 t Lajdpfxoxqd U Ro Ab Uoh Max. bending length: 3000 mm Working height: 960 mm Gap: 370 mm Number of cylinders: 2 Oil capacity: 85 l Dimensions LxWxH: 3300 x 1930 x 2325 mm Weight: 6,580 kg

Condition: ready for operation (used), Year of construction: 2019, Movement X-Axis Movement 3070 mm Y-Axis Movement 1550 mm Table Table load 920 kg Max Material Thickness Steel 25 mm Stainless steel 25 mm Aluminium 25 mm Lsdpfx Asxp Sqdeb Usah This AMADA ENSIS-3015 AJ was manufactured in 2019. A fiber laser cutting machine, it represents a reliable option for precise cutting tasks. Consider the opportunity to buy this AMADA ENSIS-3015 AJ fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Lasdpfx Aem Ncaysb Ush Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Ljdpfx Abjvhc S Ho Usah Z-AXIS TRAVEL: 100 mm WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch Laodpexn Tx Hefx Ab Ush - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1990, Press force: 50 t Bending length: 2085 mm Ledpfx Abexnyi So Ujah Distance between uprights: 1690 mm Stroke: 105 mm Throat depth: 400 mm Table height: 960 mm Total power requirement: 6.5 kW Machine weight approx.: 3,450 kg Space requirement approx.: 2500x1800x2200 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, operating hours: 99,800 h, control type: CNC control, degree of automation: automatic, bending force (max.): 100 t, working width: 3,000 mm, overall weight: 6,800 kg, Amada HFE 100-3 – 100 Ton CNC Press Brake Discover precision and reliability with this Amada HFE 100-3 press brake, perfect for demanding sheet metal work. Built by Amada, a leader in press brake technology, this machine delivers consistent, high-quality bends with excellent repeatability. Key Specifications: Tonnage: 100 tons – ideal for medium to heavy sheet metal work Working Length: 3000 mm – accommodates large panels Stroke: 200 mm – precise forming capabilities CNC Control: 6-axis Y1, Y2, Z1, Z2, R1, R2 Back Gauge Travel (X-axis): 500 mm, Y-axis: 200 mm – accurate positioning Speed: Fast approach and return (100 mm/s) with precise working speed (10 mm/s) Lsdpfsxp Nqzjx Ab Uoah Highlights & Features: Energy-efficient hydraulic system designed by Amada Servo-controlled back gauge for fast, accurate bends Compatible with all standard Amada tooling Original electrical cabinet and hydraulics in perfect condition Robust, durable design built to last This Amada HFE 100-3 is a reliable workhorse that combines precision, speed, and flexibility – perfect for workshops looking to expand their production capabilities Please verify all technical specifications with the seller.

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand FANUC Model 180i-PB Movement X-Axis Movement 2500 Y-Axis Movement 1270 This AMADA EM2510NT was manufactured in 2005. A robust turret punch press, it features a FANUC 180i-PB controller, punching force of 200 kN, and can handle sheet thickness up to 6.3 mm. Its large working area includes X-axis movement of 2500 mm and Y-axis movement of 1270 mm. Consider the opportunity to buy this AMADA EM2510NT turret punch press. Contact us for more information about this machine. Lodoxn Uxnjpfx Ab Ueah Application Types Punching

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Laedpfxsw E Emao Ab Ujh Location: Lithuania Test possible: Yes If you have further questions, we will be happy to answer them.

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3420 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 200 mm RAPID FEEDS X-Y-Z: 80 - 80 - 60 m/min Ljdpfxsvhc Tdo Ab Uoah MAX CUTTING THICKNESS: STEEL 22mm; INOX 12mm; ALUMINIUM 9 mm WORKING AREA: 3070 x 1550 x 200 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: FANUC C4000 E ; 4000 W CONTROL UNIT: FANUC 160 iLB WEIGHT: 15500 Kg NOTE: DOUBLE STORAGE TOWER LKI UL300FO TWIN year 2004; SUCTION AND FILTERING UNIT TORIT; COOLING UNIT MTA 201

Condition: excellent (used), Year of construction: 2011, operating hours: 13,900 h, functionality: fully functional, Machine is in very good technical condition. Despite it`s age, wear is very low. It was used for individual special production, not for serial. Machine is placed and connected at K-system company in Žiar nad Hronom, Slovakia. There you can see it personally. We will be helpfull with loading on truck process organization. Ledpfxexbdauj Ab Usah

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Lsdewq Dpqepfx Ab Ujah Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, year 2005 stock no. 01930 specification 7 AXIS CNC 50 TONS X 2000 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 Lsdpfxjr Artqe Ab Ujah BENDING SPEED 10 RETURN SPEED 100 SERIAL NO GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED price 38000

Condition: used, Year of construction: 2007, Punching machine Amada EMK 3610 NT, year 2007, including loading unit MB300. The machine can be inspected under power at any time. Ljdjxn Rfqepfx Ab Ujah

Year of construction: 2011, operating hours: 14,272 h, condition: excellent (used), Punching machine AMADA EM2510NT was manufactured in 2011 in France in the factory AMADA. In 2012 started used in Spain. In 2020 started used in Lithuania. And for now is for sale with 14 272 operating hours. This machine can be operate with a punching force of 200 kN. The Punching machine still is in good condition and serviced on time by Amada support company. Included full documentation of inspections. The turret punch is in exelent condition. The machine comes with the software. The Punching machine is still connected and it is possible to test anytime in Vilnius, Lithuania. Please see all photos and video. Specification: Year: 2011 Made in: France Operating time in hours: 14 272 Power on hours: 29 580 Software: icluded Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: No tools Metal length: 2 500 mm. Metal width: 1270 mm. Sheet thickness: 3.2 mm. Metal width repositioning: 5 000 mm. Weight of the workpiece: 150 kg. Dimmensions: L 6080 x W 5120 x H2318 mm Weight: 16 500 kg Location: Vilnius, Lithuania Possible to test: Yes Lsdpfx Abelxy Efe Uoah Any questions welcome.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), compressed air connection: 5 bar, warranty duration: 5 months, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms Lasdpfx Abou Haqho Ush voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1250 mm distance between columns 1070 mm Stroke beam 100 mm max. opening beam/table 370 mm C-recess 300 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 56000 h length 1600 mm Lsdpfx Aboxl E Tks Ueah width 1500 mm height 2000 mm weight 2600 kg total power requirement 2,5 kW dimensions of the machine ca. 2x2x2 m weight of the machine ca. 2,56 t All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2840 mm Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Lodpfx Aboxlvbxo Ueah Control Unit Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: reconditioned (used), Year of construction: 2017, operating hours: 2,710 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, distance table to spindle center: 750 mm, table length: 900 mm, table load: 1,500 kg, type of input current: three-phase, table width: 600 mm, grinding wheel width: 50 mm, overall weight: 11,000 kg, grinding spindle motor power: 11,000 W, grinding wheel speed: 2,000 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: CNC control : FANUC series 32i-B Colour touch screen : 15 ["] W axis travel (longitudinal axis) : 1300 [mm] Min. Stroke speed W axis : 0.1 [mm/min] Max. Stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 660 [mm] Min. Stroke speed X axis : 0.1 [mm/min] Max. Stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 750 [mm] Min. Stroke speed Y axis : 0.1 [mm/min] Max. Stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 900 [mm] Table width : 600 [mm] Max. distance spindle nose / table : 750 [mm] Max. load on table : 1500 [Kg] Grinding wheel min. speed : 300 [rpm] Grinding wheel max. speed : 2000 [rpm] Lsdpfx Abowuk Ino Ujah Grinding spindle motor power : 11 [kW] Max. diameter grinding wheel : 405 [mm] Max. grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Total power required : 29 [kVA] Weight : 11000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 900 x 600 [mm] x3 linear glass scales on the 3 linear axes x1 workpiece probe x1 paper tape filtration unit x1 oil chiller DAIKIN AKZ149-C x1 oil mist collector IFS type M 1600 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Lajdpeu Dw U Sjfx Ab Ujh Year of manufacture: 1986 Stroke length: 175mm Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Optionally with disc winder and straightener.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 500 mm, table load: 1,000 kg, type of input current: three-phase, overall weight: 5,000 kg, grinding spindle motor power: 7,500 W, grinding wheel speed: 2,500 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: CNC control : FANUC series 32i-B W axis travel (longitudinal axis) : 1000 [mm] Min stroke speed W axis : 0.1 [mm/min] Max stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 450 [mm] Min stroke speed X axis : 0.1 [mm/min] Max stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 500 [mm] Min stroke speed Y axis : 0.1 [mm/min] Max stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 600 [mm] Table width : 400 [mm] Max distance spindle nose / table : 500 [mm] Max load on table : 1000 [Kg] Grinding wheel min speed : 300 [rpm] Grinding wheel max speed : 2500 [rpm] Grinding spindle motor power : 7.5 [kW] Max diameter grinding wheel : 355 [mm] Max grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Total power required : 23 [kVA] Weight : 5000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 600 x 400 [mm] Ljdpfx Aewulg Eob Ujah x3 glass linear scales on the 3 linear axes x1 workpiece probe x1 paper filtration unit x1 oil chiller DAIKIN AKZ149M133 x1 oil mist collector IFS type IFMC 1100 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, stroke length: 100 mm, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm Lodpfx Asu E U Nijb Uoah sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg