Used Bed Dryer for sale (6,229)

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Iisdpfxjz Rz Dne Ahysh Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 1,750 kg, total width: 1,120 mm, total length: 3,750 mm, number of chambers: 1, Equipment: documentation/manual, For sale: a high-performance fluid bed dryer from the renowned manufacturer Buhler, model OTWG-280. This is a horizontally constructed machine designed for the continuous thermal processing of bulk and granular materials. With its sectional design, the machine can function both as a dryer and a cooler, making it an extremely versatile element of any production line. Iiodpsy D Iiuofx Ahyjh The machine utilizes the principle of fluidization. The process involves blowing hot (or cold) air through a perforated base holding the raw material. The air lifts the material particles, forming a so-called "fluidized bed." In this state, each particle is surrounded on all sides by the heating/cooling medium, providing: - Instant heat exchange (significantly faster than drum dryers) - Uniform drying with no risk of localized overheating - Gentle product handling – minimal risk of mechanical damage to raw materials We have two OTWG 280 units and one OTWG 90 unit available. The price for the OTWG 280 is listed in the advertisement. OTWG 90 price: 40,000 EUR.

Condition: used, Year of construction: 1989, Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer : Glatt Model: WSG-C200 Year: 1989 Previous use: pharmaceutical Product pan capacity: 700 litres. Iedpfjx R An Sex Ahysih Product capacity: 200 – 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Sold with 2 pans and protective pockets Trolley reverser: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Condition: used, Year of construction: 2004, Fluid bed by Romaco Innojet. Model VENTILUS 800 (IEV800-001-2004). Manufactured in 2004. Included peripherals: - Bag filter DFO 4-32-R - Air heater Iedpfx Asx Sqyxehyoih

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C Iijdpsyzaamsfx Ahyeh ambient temperature: 25 ° C operating pressure: 7 bar

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Iijdezxzrpopfx Ahyjh Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- Iiodpsyrxwwofx Ahyjh # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Iodpfxszw Apgo Ahyeih Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2009, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Key features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-down valves in a leak-proof design • Compact check valve combination, which guarantees continuous operational reliability while maintaining high availability. Iijdpfxeypb Due Ahyoh All adsorption dryers in the K-MT series feature: • Self-cleaning sieve beds on the wet side • High-quality desiccant During adsorption, the desiccant absorbs the moisture contained in the compressed air. Parker Zander uses only highly active desiccant of the molecular sieve type with high capacity. This desiccant guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: Operating pressure: 7 bar Inlet temperature: 35°C Pressure dew point: -40°C in a cycle with: - 5 minutes adsorption - 4 minutes desorption - 1 minute pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and therefore inevitably results in 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system, with new, groundbreaking functions and a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with multitronic. The multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of cycle times is possible. • LEDs on the front for the individual functions, such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including a digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of manufacture: 2009 Manufacturer's price: €8,880

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 Iisdpfx Aeyy U I Nshyjh 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. Iiodpfx Ahozg Iw Ioyeh On site inspection and testing are possible.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Iedpfx Aozf Ivuehyeih Pump Type: Belt-driven, cast-iron piston

Condition: used, Scott AST Air Swept Tubular Dryer Isdpfxjzvgius Ahyeih Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Universal bed-type milling machine | Brand: KIHEUNG | Type: KNC U 1050 BT Year of manufacture: 2021 An ideal milling machine for high chip removal rates combined with excellent geometric machining accuracy. The machine can be inspected by prior appointment under power. Operating hours (October 2026): - Control system on: 848 h - Machine on: 15.810 h - Program run: 7.632 h - Spindle: 5.624 h TECHNICAL SPECIFICATIONS - Path control: HEIDENHAIN TNC 640 Travels: - X-axis: 3.000 mm - Y-axis: 1.050 mm - Z-axis: 1.300 mm Table: - Length x width: 3.200 x 900 mm, max. table load: 1 ton Feed rates: - Feed rate in all axes: 10.000 mm/min - Rapid traverse on X, Y and Z axes: 16.000 mm/min each Spindle: - Tool holder: SK 50 - Spindle speeds: 2-stage * Speed range (stage I): 0 – 1.000 rpm * Speed range (stage II): 1.001 – 4.000 rpm - Machine weight: approx. 26 tons Iedoz Tdlyepfx Ahyoih EQUIPMENT - Path control: HEIDENHAIN TNC 640 HSCI - Full enclosure of the working area - 2 chip conveyors (hinged belt) - Linear measuring system using “HEIDENHAIN” measuring rods - AC drives, SIEMENS - ZF reduction gearbox, 2-stage, cooled - K5 Universal automatic milling head, bi-rotating, 5.000 rpm / 1.0° x 1.0° - 1 x milling head – NEW (in original packaging) – - Tool changer (chain magazine), horizontal/vertical change * Capacity: 40 positions - Cooling through the spindle - High-performance cooling system, with 2 high-pressure pumps - Touch probe, HEIDENHAIN TS 460 - Probing system for workpiece measurement, HEIDENHAIN HR 550 FS + HEIDENHAIN HRA551 FS portable, electronic handwheel with radio control - Magnetic clamping plate, SCHUNK: 800 x 500 mm - Various spare and wear parts - Documentation - CE Declaration of Conformity - Further good features … No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on features are available upon request.

Condition: defective spare-parts repository (used), Year of construction: 2021, operating hours: 1 h, machine/vehicle number: 101780.0, Defective Kaeser Aircenter SX 6 – 11 bar rotary screw compressor with integrated refrigeration dryer with 200-liter air receiver with Sigma Control 2 controller with Kaeser F6KE filter incl. ECO-DRAIN with Kaeser F6KA activated carbon filter The compressor is functional, but the screw airend makes loud noises. Therefore, the system is sold as defective / for parts. Year of construction: 11/2021 Operating hours: 981 h Max. pressure: 11 bar Rated power: 4.0 kW Free air delivery (FAD) at 10 bar: 0.49 m³/min Sound level: 61 dB(A) Air outlet: 3/4" Iodpfxoz Sz Tfs Ahyoih Air receiver: 200-liter capacity Pressure dew point (refrigeration dryer): + 3°C Condensate drain: level-controlled ECO-DRAIN Dimensions (L x W x H): 590 x 1090 x 1560 mm Weight: 290 kg Convenient leasing options available for new machines via our house bank. Visit our retail store. We always stock a large selection of new and used compressors!

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Iiodpfx Ajy R Tdwjhyoh

Condition: used, Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 82110802, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table width: 1,150 mm, table length: 9,950 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, input voltage: 400 V, power: 38 kW (51.67 HP), We are offering this used Kiheung RIGITRAX bed milling machine, manufactured in 2011. Manufacturer: KIHEUNG Model: RIGITRAX Serial number: 82110802 Date of manufacture: 09/08/2011 Voltage: 400 V Frequency: 50 Hz Machine hours: Control on = 11,609 hours Machine on = 40,384 hours Program running = 15,962 hours Spindle running time = 14,324 hours (As of 10/26) Further technical data can be found in the attached PDF. Iisdpfx Aez Ruy Nshysh Machine loading will be handled by the customer. The machine is currently being disassembled. Its functionality was recorded in a video in week 41. If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,000 h, functionality: fully functional, volume flow: 342 m³/h, pressure dew point: 3 °C, type of cooling: air, For sale is a used Kaeser TD 51 refrigerant dryer from our company’s stock. Iodez R I T Repfx Ahyeih Manufacturer: Kaeser Type: TD 51 Year of manufacture: 2001 Operating hours: approx. 46,275 h (Operating hours taken from the associated compressor) Available from: December 2026 The dryer is currently in operation and functions without any known issues. The condition is good. The unit has been regularly maintained and reliably used in ongoing operations. We are not aware of any technical defects. An on-site inspection is possible after prior arrangement.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Iijdpfsq Igyvex Ahyjh Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF Iiodpfxsy Iplfo Ahyeh 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: used, Year of construction: 1980, functionality: limited functionality, machine/vehicle number: 4119, travel distance X-axis: 1,450 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 415 mm, total width: 3,400 mm, total length: 4,200 mm, overall weight: 3,500 kg, Last major overhaul in 2006 Swiveling spindle head, 360° Control: Digital display Clamping area: 1800 x 400 mm Table load: 1000 kg Travel in the longitudinal direction: 1450 mm Travel in the transverse direction: 365 mm Travel in the vertical direction: 415 mm Spindle connection: SK40 Spindle speed: 31.5-45-63-90-125-180-250-355-500-710-1000-1400 rpm Feed rate in the longitudinal direction: 8-1200 mm/min Feed rate in the transverse direction: 8-1200 mm/min Feed rate in the vertical direction: 4-600 mm/min Spindle drive: 7.5 kW Feed motor: 3.2 kW Coolant pump: 0.18 kW Hydraulic system: 0.37 kW Total connected load: 12 kVA Weight, approx.: 3500 kg Space requirement, approx. (L x W): 4200 x 3400 mm Technical data subject to change without notice. Errors and prior sale excepted. Iedpfx Aez Nfbzshyjih

Condition: good (used), Year of construction: 2011, Refrigerant dryer, Kaeser, TE 91 – used: Price ex-works: €1,750 (net) plus dismantling costs, etc. Manufacturer: Kaeser Type: TE 91 Year of manufacture: 2011 Iisdpfxjz Sd Iyj Ahysh Article number: 1.8008.50010 Serial number: 3027 Refrigerant: R134a Refrigerant charge: 1.950 kg Operating pressure: 18 bar, or 16 bar Max. operating pressure, air system: 16 bar 400V/3/50Hz Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Iisdpfx Ahjz Ixlveyjh Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: good (used), Year of construction: 2016, machine/vehicle number: 161276, Offer 26224 Technical data: - Table size approx. 2000 x 400 mm - Working range of the axes - X 1500 mm - Y 650 mm - Z (vertical) 650 mm - Tool holder ISO 50 - 12 working spindle speeds, horizontal + vertical 42 - 1290 rpm - Overhang, vertical head 450 mm - Overhang, horizontal head 602 mm - Longitudinal + transverse + vertical feed range 20 - 2000 mm/min Isdpfxjz R Rags Ahysih - Rapid traverse, longitudinal + transverse / vertical 3600 / 1500 mm/min - Min. / max. distance, milling spindle – table surface 0 - 600 mm - Digital display - Coolant system - Drive 400 V 10 kW - Space requirement approx. W 3000 x H 2400 x D 2400 mm - Weight approx. 4600 kg

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Iisdpfezaum Dox Ahyjh Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!