Used 4 Axis Machining Center for sale (103,465)

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm Ljdpfx Ajxr N Rmonujac MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 19,857 h, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Z-axis travel: 180 mm Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT Worktable with traverse Auxiliary unit for heavy parts Pneumatic clamps for door and window production Vacuum pump 250 m3/h Lajdpfx Aex Sri Ijnusc Automatic lubrication Waste conveyor

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. Ledpfx Anszfgmxeujac The machine is available for inspection in Riga, Latvia. The machine is currently powered on and can be inspected by appointment. Additional photos and technical information are available upon request.

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm Lajdpfjxc I Dgsx Anuoc VMC 1890 table 2000x900 mm

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Lajdpfxszcda Ss Anuoc Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 36,012 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, controller model: 3D Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 635 mm Travel range, Y-axis: 460 mm Travel range, Z-axis: 510 mm Spindle speed range: 20 - 10,000 rpm Table dimensions: 790 x 560 mm Table load capacity: 600 kg Tool holder: SK 40 Number of tool magazine slots: 20 MACHINE DETAILS Control system: 3D Heidenhain i TNC 530 Total power consumption: 13.9 kW Operating hours (according to counter) Spindle hours: 36,050 h Power-on hours: 91,000 h Dimensions & Weight Lodpfx Anezb Dzmjujac Dimensions (L x W x H): 3,000 x 2,000 x 2,150 mm Machine weight: 3.6 t

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 80.4308.0097, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, controller model: FANUC Professional 3, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 900 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 970 mm Pallet size: 630 mm × 630 mm Number of pallets: 2 Max. workpiece weight: approx. 1,200 kg Spindle connection: HSK-A100 Max. spindle speed: 12,000 rpm Tool magazine: 188 positions Tool change time: approx. 1.7 s Rapid traverse: up to 50 m/min MACHINE DETAILS Control system: FANUC Professional 3 Machine weight: approx. 18 t Ledpfx Aszb Efyenusac EQUIPMENT Dual-pallet system Large 188-position tool magazine Automatic tool changer Through-spindle coolant / coolant system Chip conveyor NC rotary table Network/DNC connection Note: The machine was previously connected to a pallet loading station. The pallets can, of course, also be loaded manually.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,660 mm Travel range Y-axis: 760 mm Travel range Z-axis: 660 mm Lajdpfxozb D N Rj Anujc Table size: 760 x 2,000 mm Table load capacity max.: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Tool diameter max.: 80 mm Tool diameter with free adjacent slot max.: 110 mm Tool length max.: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control system: MAZATROL M-PLUS Dimensions & Weight Space requirement: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been regularly serviced.

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Ljdpfxjzara Uj Anusac Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manually 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 500 mm Spindle speed: 1 - 18,000 rpm Tool holder: HSK-A63 Lodpfxozd R R Es Anueac Tool magazine capacity: 70 Tool-to-tool change time: 2.5 s Acceleration: 20 m/s² Travel speed: 120 m/min MACHINE DETAILS Number of pallets: 6 EQUIPMENT Integrated workpiece changer system High-dynamic 5-axis machining Weight-optimized kinematics Linear motor drives

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Ledozb A Ekjpfx Anueac Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min Ledpfx Aszdpqwsnusac MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15744, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, table load: 1,500 kg, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Table length: 1,000 mm Table width: 560 mm Table load: max. 1,500 kg Lajdpfxozcymze Anujc Spindle connection: HSK63 Tool changer: 30 positions Rapid traverse rate: 35 m/min Acceleration: 5 m/s² MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,500 x 2,800 mm Weight: 7,200 kg Total connected load (including cooling unit): 42 kVA

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Lodpfx Anezcuyisueac Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Laodpfx Anozb D Aqeuoc Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates the bidder to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Lasdpfx Aozd Tapsnujc Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools 2 pallets Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm Laedozdkhkopfx Anujc B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel in X-axis: 1,100 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Maximum table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle mounting: ISO 40 / DIN 69871A Magazine: 32 positions MACHINE DETAILS Lodezdkgaspfx Anueac Drive power: 10 / 17 kW Internal cooling (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Laedpfxezdf Dhj Anujc Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control system: Mazatrol 640M Operating time according to control system display: 40,843 h Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Unladen weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call. Ledpfeyr Utnox Anueac

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. 10000 rpm 500mm x 450mm x 400mm Lsdpszggrdofx Anuoac SK 40, 16 tool places SINUMERIK 840 D

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, LOW operating hours! Spindle hours: 1,300 h Power-on hours: 10,700 h Control: SIEMENS 840D SL OPERATE Travel: X = 450, Y = 400, Z = 400 mm Table size: 770 x 410 mm Max. workpiece weight: 200 kg Tool changer magazine with 24 stations Tool holder: SK 40 Max. spindle speed: 15,000 rpm Ledpfoy Ifmxex Anueac

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E Lasdpjzgfwlsfx Anujc 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel ranges: X/Y/Z = 2,300 x 1,200 x 600 mm Lasdpowwt Nmofx Anuoc NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool interface: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons. 23626

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Lajdpfxewv Tm Nj Anujc Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon measuring probe Chip conveyor Spindle cooler IKZ (internal cooling system) 23626