Used 3 Axis Cnc Milling Machine for sale (97,974)

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken. Codpev Sfk Hjfx Ab Tsrk

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, LINE GICAMILL S24/6000 gantry milling machine from 1990. CNC NUM 760F. X 6000, Y 2600, Z 1000. Table size 6000 x 2000 mm. Distance between columns 2445 mm. Clearance under crossbeam 1335 mm. Spindle 35 kW, 1620 rpm. Siemens motors. Codpfxjxu U Rwj Ab Tork

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 250 mm z-travel 400 mm CNC-control Mitsubishi M70 Table dimensions Ø 250 mm max. table load 60 kg spindle taper HSK 63 spindle turning speed range 20 - 12.000 U/min spindle motor 7,5 kW Csdjxq Hgijpfx Ab Terk feed range max. 10.000 mm/min rapid traverse 48 / 60 / 72 m/min tool change unit 24 Pos. coolant IKZ voltage 400 V c-axis 360 0 b-axis ° total power requirement 25 kW weight of the machine ca. 5,0 t dimensions of the machine ca. 1,90 x 2,70 x 2,85 m chip conveyor 2,00 x 0,60 x 1,65 m coolant tank 1,60 x 1,20 x 0,60 m - Serial No.: RM10090 Axis CNC-Control (5-side machining with single clamping) – Internal coolant through spindle TSC – electronic hand wheel – Spindel oil chiller – working light – Central lubrication

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 8,000 rpm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 Credsw Ty S Sepfx Ab Tsk - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Crodpewq Ndgjfx Ab Tsk Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Crjdpfswtpfpsx Ab Tsk Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: ready for operation (used), Year of construction: 2002, 1 GOGLIO MX 60 moving column milling machine from 2002 CNC SELCA 4045D X 6000 Codpewxacvjfx Ab Tsrk Z 1800 Y 1100 Fixed table 6000 x 2000 Automatic head 1°X 3° Speed 3000 rpm - 24 kW Through-spindle coolant 20 bar ATC 40 tools ISO 50 Chip conveyor Still in operation at the customer

Year of construction: 1986, condition: good (used), Universal milling machine Fabr.KUNZMANN Type:UF 6 / 3 Bj.1986 with digital indicator Heidenhain spindle mounting : ISO 40 horizontal and vertical spindle speed : 50 - 2150 rpm feeds stepless : 0-1000 mm/min steps X / Y and Z 0-250 mm/min Rapid traverse : 2000 mm/min X / Y and Z 500 mm / min table surface :860 mm X 265 mm tiltability + - 45 degrees Counter bearing, 2 milling arbors for horizontal milling. Crodeich Dvjpfx Ab Tok Machine Docs Available Good condition Ready for demonstration .

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Credpfxeit Tr To Ab Tek Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min Csdpfovhfqrox Ab Terk - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Crodpfx Abovyr R Nj Tek Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture Crjdpou Sq Emefx Ab Tsk *

Condition: like new (used), Machine like new from laboratory x-path 400 mm y-path 320 mm z-path 400 mm Control Heidenhain TNC124 table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivels 90 degrees Crodpfju Nnaisx Ab Tsk Total power requirement 5.0 kW Machine weight approx. 1.3 t Space requirement approx. 2.00 x 2.00 x 2.00 m

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, Crsdsu Rt I Ijpfx Ab Tsk diverse accessories.

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom. Crsdpfx Aswhm Sisb Tok

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm Crsdpfx Aovgnm Hjb Tjk daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

Year of construction: 1990, condition: ready for operation (used), machine/vehicle number: 350119, table mounting size: 350 x 700 mm x-axis: 500 mm y-axis: 320 mm Credjgq Dclspfx Ab Tek z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Condition: used, Year of construction: 1996, functionality: fully functional, Universal Milling Machine Kunzmann WF7/3 CNC with Heidenhain TNC 124 Control – Excellent Condition!! Technical Data: • Year of manufacture: 1996, Machine No. 370173 • Rigid angle table • Infinitely variable spindle speed up to 3,700 rpm • Feeds on 3 axes, continuously variable from 0 to 1,000 mm/min • Travel distances X/Y/Z: 600/400/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table surface: 650 x 350 mm • Table load capacity: 300 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 • Hydraulic tool clamping system • Weight: approx. 1,800 kg • Space requirement: approx. 2.3 x 2 x 2 m • Main drive motor: 4 kW • Total power consumption: approx. 7 kVA Codpjw Rx Tijfx Ab Tjrk Features and Equipment: • Heidenhain TNC 124 CNC control • Hydraulic clamping for vertical and horizontal operations • Automatic central lubrication • Spindle brake • Technical documentation, spare parts lists, control manual, and programming examples • Full safety enclosure • Coolant system • Electronic handwheel About the machine: For sale is a Kunzmann WF7/3 universal milling machine equipped with a Heidenhain TNC 124 CNC control. This universal milling machine is in outstanding condition. It comes from an automotive manufacturer where it was used only sparingly for training purposes. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal modes. Switching from vertical to horizontal operation is easy, achieved by simply swiveling the vertical head aside. The guideways are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected at our facility. Take the opportunity to view and test the Kunzmann under power at our location.

Condition: excellent (used), Year of construction: 2002, Kunzmann WF4/3 Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 124 Control, Year of Manufacture 2002 – Excellent CONDITION CE-compliant!! Crsdpfxew U Exyj Ab Tsk Technical Data: • Year of manufacture: 2002 • Fixed angle table • Spindle speed: infinitely variable up to 4000 rpm • Feed rates, infinitely variable in 3 axes: 0 to 2000 mm/min • Travel X/Y/Z: 400/350/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 • Hydraulic clamping system • Approx. weight: 1700 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 12 KVA Accessories & Equipment: • Heidenhain TNC 124 Control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system About the Machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control unit. This universal milling machine is in excellent original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. Take the opportunity to view and test the Kunzmann under power at our location. You can find more milling machines from renowned manufacturers on our website.

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m Crodpfx Absu Rt Nxo Tjk CNC milling machine with 432 Control.

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Crodpfsw D D Sfjx Ab Tek Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: excellent (used), Valentini Macchine TP/3 Overhead Spindle Moulder Spindle-to-arm distance: 800 mm Dual-speed spindle drive motor: 3.3/2.6 kW Codpfxjwy Np Ie Ab Terk Two spindle speeds: 9000/18000 RPM Spindle tilting angle adjustment: 45-90-45 degrees Vertical spindle stroke: 80 mm Height-adjustable table Pneumatic spindle control via pedal

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good Condition, CE-Compliant! Technical Data: >> Year of Manufacture: 2000 Machine No.: 343030 >> Fixed angle table >> Infinitely variable speed up to 4,000 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min Cedpfswzu Skex Ab Tjrk >> Travel X/Y/Z: 400/320/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quills – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 13 KVA Equipment and Accessories: >> Heidenhain TNC 124 Control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system About the machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control is very easy to operate. Additionally, the machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann under power at our site.

Condition: used, Year of construction: 1980, spindle diameter 105 mm cross travel of table 1600 mm vertical adjustment of drilling slide 1600 mm longitudinal movement of column 1000 mm spindle stroke - max. 600 mm spindle taper ISO SK 50 spindle turning speed range 6,3- 1600 U/min table surface area 1120 x 1120 mm spindle motor 45 kW voltage 400 V feeds x/y/z -stepless 0 - 5000 mm/min rapid travel x/y/z 10 m/min table load 6 t table rotation 360 ° total power requirement 82 kW weight of the machine ca. 18 t dimensions of the machine ca. 4,8 x 4,9 x 4,2 m Machine was complete reconditioned and retrofitted with Siemens 840 D control in 2008 for a price of 400.000,- Euro ! Machine has a 40 position ATC, 5 CNC axes with ball screw drives (X,Y,Z,W,B), housing around machine with safety doors, cooling arrangement built in 2020 and Crodpfxeu Rt Ine Ab Tek new spindle drive Siemens built in 2008.

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Crsdpfx Absu Rt Nrs Tjk Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.