Used 3 Axis Cnc Milling Machine for sale (102,258)

Year of construction: 2017, condition: ready for operation (used), X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible. Iiedpfx Aezcfk Ejbnjf

Year of construction: 1993, condition: ready for operation (used), A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115mm, max. back-side machining speed: 5600rpm, back-side machining torque: 18Nm, drilling/thread cutting station clamping range: 1mm-16mm, max. Q-axis working stroke: 25mm, max. drilling spindle speed: approx. 3500rpm, max. thread cutting spindle speed: approx. 1000rpm, weight: 3200kg, machine dimensions: approx. 2500mm/1120mm/1620mm. Inspection by appointment possible. Iodpfozipg Nsx Abneif

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Isdsxwcu Aopfx Abnsif

Year of construction: 2008, condition: ready for operation (used), A CNC vertical milling machine DMG in need of repair is available. Travel X/Y/Z: 750mm/600mm/520mm, table diameter: 700mm, swivel B: -5°/110°, max. workpiece diameter: 800mm, max. workpiece height: 590mm, max. workpiece weight: 350kg, tool holder: SK40, speed: 14000rpm, tool positions: 30, rapid traverse: 24m/min, feed: 20m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.006mm. Machine dimensions X/Y/Z: approx. 5600mm/5000mm/3000mm, weight: approx. 6000kg, control: Heidenhain iTNC530 3D, operating hours: approx. 62250h, spindle hours: approx. 15550h. The geometry of the machine must be checked and it shows deviations in the axes, including the rotary axis. Documentation available. An on-site inspection is possible. Iiodpezidixefx Abnsf

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Iedpfex Tpytsx Abnsif

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 Ijdpfxozr Uudj Abnsif EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Iedpszukfdofx Abnoif Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2000, Available immediately from our location: CNC bed milling machine MTE Type: Kompakt Plus Year of manufacture: 2000 Heidenhain TNC 410 control Table: 2200 x 750 mm Travel ranges X/Y/Z: 2000/800/800 mm Table load: 4 tons Tool holder: SK 50 Hydraulic tool clamping Spindle speeds: 40 – 2500 rpm Spindle power: 15 kW Total power consumption: 30 kW Iiedpfxjzukd To Abnef Coolant system Weight: 12 tons Price: Euro 10,000.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Iedpfxjzukdas Abnjif Type: Primo II Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Isdpfx Abjzukcpsnjif

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - CNC options: Barcode reader, Offcut conveyor, Laser for vacuum pod positioning - Working range X [mm]: 3110 Ijdpfx Aoxtbgpsbnjif - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Insert-type milling cutters for CNC machines. Iedpfxszrydwe Abnsif

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Isdpfezrybpex Abnsif Technical data: - Length: Various - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: Isdpszrv Dgofx Abneif One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Year of construction: 2004, condition: ready for operation (used), X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible. Iisdpfx Aboztzq Ujnef

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] Iiedpfx Abjw Tnhbenof - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 2700/850 [mm] - Maximum weight upon table : 6000 [kg] - Travels on X/Y/Z axes : 2500/1000/1100 [mm] - Rapid traverses rates (X/Y/Z) : 15 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 3000 [rpm] * Spindle power : 25 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 6820/3800 [mm] - Machine height : 2870 [mm] - Machine weight : 12500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 23201 [h] - Number of working hours : 7902 [h] - Number of spindle hours : 7638 [h] EQUIPMENT - CNC : Heidenhain iTNC530 Interface : RS232/RJ45/USB - Interactive programming - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chips conveyor Ijdpfx Absznd D Tsnsif

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 S Year of Construction: 1995 Operating Hours: 65,071 Control System: HEIDENHAIN TNC 426 Working Area X/Y/Z: 600 x 450 x 500 mm Spindle Speed Range: 20 - 6,300 RPM Tool Holder: SK 40 M & H 3D Probe (for workpiece probing) Ijdpfxov Rxa Ss Abnoif Vertical-Horizontal Milling Attachment Drilling Spindle Coolant System Rotary Table: 900 x 458 Weight: 4,000 kg Machine Dimensions: L x W x H approx.: 3,900 x 2,000 x 2,000 mm ä3826

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel ranges X/Y/Z: 600 x 450 x 500 mm Isdpfov Rpr Sjx Abneif Rotary table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 3826ä

Condition: used, Year of construction: 1992, functionality: unexamined, Used CNC tool milling machine, Fehlmann Picomax 51-CNC 3, year of manufacture 1992. Last documented inspection: 03/31/2023. Technical data: - Travels X/Y/Z: 420 / 240 / 120 mm - W-axis: 450 mm - Table: 730 x 280 mm - Distance from table to spindle: 0–560 mm - Maximum table load: 75 kg - Spindle power: 4 kW Iijdpozrnymjfx Abnef - Torque: 45 Nm - Speed: 50–9,000 rpm - Tool changer: SF32 - Feed rate X/Y: 1–7,200 mm/min - Feed rate Z: 1–3,600 mm/min - Drilling capacity in steel: up to 20 mm - Thread cutting: up to M20 - Milling: up to 20 mm - Weight: approx. 1,300 kg - Connection: 3 x 380 V / 50 Hz, 10 kW - Positioning accuracy: 0.01 mm on 400 mm - Repeatability: 0.002 mm Extensive accessories and documentation as shown in the photos. Location: 65618 Selters, Germany.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Iisdjy Tk R Hepfx Abnof Camera System AKI System Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, operating hours: 18,074 h, machine/vehicle number: 302-58, Travel ranges (X/Y/Z): 550/300/425 mm, spindle speed max.: 10,500 rpm, tool holder SK 40, machine weight: 6,500 kg, control system SIEMENS Sinumerik 840 D, chip conveyor KNOLL 600 K-1/320, belt filter system BÜRENER MASCHINENFABRIK KA M. TPF 150/510S, year of manufacture: 2017, rotary table. Drilling emulsion/lubricants must be extracted and disposed of by the customer in a professional manner. Ijdpfszqy Utsx Abnjif

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Iisdpfx Abevvi Spsnjf

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Iodpfeyf Rqvex Abnsif Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2500 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 20 - 3.000 rpm (5.000 rpm direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: New HR-510External coolant Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. Iodpfxow Tfb So Abnoif The machine was fully overhauled in 2011. A new control system and drives were installed.