Used Alzmetall Ab 4 for sale (128)

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Itodpfx Asn N Ekceh Nob Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: ready for operation (used), A column drilling machine Alzmetall with a rotating round table is available. Drilling capacity steel/cast iron: 45mm/50mm, reach: 345mm, tool holder: MK4, speed: 720rpm. Machine dimensions X/Y/Z: approx. 1100mm/600mm/2000mm, weight: approx. 650kg. An on-site inspection is possible. Itsdpfxex Hz N Te Ah Neb

Condition: good (used), - MK4 Itsdpfxjxc N T Ao Ah Nob - Automatic feed - Variomatic - Rotates clockwise and counterclockwise - Cooling - Machine vise - Lighting - 380V

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Itodpfxev S Iqco Ah Nsb total power requirement 4 kW

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm bore stroke 170 mm Iedpown T A Uefx Ah Nstb table surface area 730 x 590 mm

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm table surface area 720 x 5 mm Isdpfjv Ehftex Ah Nstb

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm Itodpfswncaiox Ah Neb - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox Itjdpfx Ahskt Nqqs Nob - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 Itodpjt Etiyjfx Ah Neb - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Itedpfx Aewd Ii Ujh Neb Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, Pillar drilling machines Itjdpfx Aheb N Ezro Nob

Condition: used, Year of construction: 1978, number of spindles 3 bore capacity in steel (diameter) 40 mm bore stroke 180 mm weight of the machine ca. 2,3 t Itedpfx Ajd Ih S Seh Njb

Condition: used, Year of construction: 1980, taper MK 4 serial number 520 Itodpfjw Sydlsx Ah Nsb weight of the machine ca. 440 kg

Condition: new, Year of construction: 2024, ALZMETALL column drilling machine AB 34 iTRONIC drilling capacity in steel 34mm, spindle speed: 100-1800 rpm, Short spindle MK4, spindle stroke: 160mm, throat depth: 300mm, column diameter: 145mm, machine table usable support: 615x430mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min. / max. 138/688mm, machine table height adjustment via hand crank, feeds 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: 7" TFT LCD display with touch function Thread cutting device Infinitely variable speed adjustment Spindle protection Three separate buttons for clockwise rotation - counterclockwise rotation - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 Volt Protection class IP 54 Motor insulation class "F" (155°) Electromagnetic feed overload protection Machine oil initial filling Ijdpfxjiqyixe Ah Njtb Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light Pos. 12. Coolant system A Pos. 24 Foot switch for thread cutting Pos. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can be viewed at our premises by prior arrangement.

Condition: used, Column drilling machine - Capacity: 40 mm - Morse taper 4 - Automatic feed - Variable spindle speed: 50-1280 rpm - Spindle stroke: 180 mm - Table: 720x560 mm - Column diameter: 160 mm - Throat depth: 340 mm Itsdpjx Ttunofx Ah Nob - Coolant system - Workpiece vise

Condition: used, bore capacity in steel (diameter) 45 mm throat 350 mm bore stroke 180 mm 4 speeds 30 - 765 U/min Itodpfsvuz Tvox Ah Nob table-size 720 x 560 mm total power requirement 3,4 kW weight 950 kg dimensions 1200 x 800 x 2300 mm Features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable fixed depth stop - Emergency stop foot switch - Drill chuck

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm Isdpfsxaa R Hjx Ah Nstb total power requirement 0.6 / 1.8 kW weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 300 mm bore stroke 160 mm threading M 30 turning speeds 100 - 1600 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection Iodpjxabq Iefx Ah Njtb - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint Itedpfexab Nkjx Ah Neb * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: good (used), Year of construction: 2016, machine/vehicle number: PRJ052353, Offer 25490 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Drilling performance in steel ST 60: 50 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 160 mm - Digital speed display - Throat depth: 300 mm - Swivel table with vice: 440 x 440 mm - Column diameter: 145 mm - Electromagnetic feeds: 0.1 – 0.2 – 0.3 – 0.4 mm/rev - Infinitely variable drill spindle speeds with digital readout: 200 – 3200 rpm - Drive: 400 V / 1.8 / 2.9 kW Isdexy Hp Aepfx Ah Netb - Lighting - Electrical foot switch - Required space (approx.): W 650 x H 1900 x D 800 mm - Weight (approx.): 470 kg

Condition: new, functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A Itodpfx Aexd Tp Deh Njb - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Ijdpfxsxd Tpws Ah Notb Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: good (used), Year of construction: 2005, machine/vehicle number: 34704, Offer 25236 Technical specifications: - Drilling capacity in steel ST 60: 34 mm - Maximum drilling capacity in steel ST 60: 40 mm - Drill spindle taper: MT 4 - Drill spindle travel: 160 mm - Throat depth: 330 mm - Table with 2 T-slots: 610 x 430 mm - Max. distance table – drill spindle approx.: 665 mm - 4 feed rates: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Infinitely variable spindle speeds: 70 - 1800 rpm - Work light Iedpfxewyb Rdj Ah Njtb - RÖHM machine vice - Various HSS drills, countersinks, reducing sleeves - Thread cutting device - Drive: 400 V / 0.6 / 1.8 kW - Space requirement approx.: W 1000 x H 2050 x D 1150 mm - Weight approx.: 470 kg

Condition: excellent (used), Year of construction: 1980, table width: 460 mm, table length: 745 mm, space requirement width: 800 mm, space requirement length: 1,200 mm, space requirement height: 2,400 mm, Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Itjdpfjvwkw Aox Ah Njb Table dimensions: 745 x 460 mm Machine can be viewed under power

Condition: used, Offer in progress! Itsdpfxowh Ug Us Ah Neb