3-axis machining centre

POS POSmill CE 1000

Condition: used, Year of construction: 2019, operating hours: 2,117 h, machine/vehicle number: 20190908, Travel ranges (X/Y/Z): 1 mm, table size: 1,200 x 600 mm, spindle speed: 12,000 rpm, 40-position tool changer, tool holder SK 40, control system HEIDENHAIN TNC 640, machine weight: 7,800 kg, 3D measuring head, chip conveyor, paper band filter system, chip container. Nledpfszha E Tjx Ad Sec

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Nedpfjv Tk Exex Ad Sslc Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: excellent (used), Year of construction: 2023, operating hours: 533 h, functionality: fully functional, machine/vehicle number: 20230605, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 10,000 rpm, The machine was fully overhauled by the manufacturer at the end of 2025 (invoice attached). Documentation of completed work and replaced parts is available. The machine has only 533 spindle hours! The original price of the machine was EUR 222,000! TECHNICAL DETAILS Travel X-axis: 1,060 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Spindle speed: 10,000 rpm Spindle taper: ISO 40 MACHINE DETAILS Control: Heidenhain TNC 640 Coolant supply: 20 bar Rated power: 30 kVA Full-load current: 52 A Max. current load: 250 A Short circuit withstand: 25 kA Input voltage: 400 V Type of input current: Three-phase current Total weight: 7,800 kg Nsdpfxoyma Rue Ad Solc Operating hours Spindle hours: 533 h Machine ON hours: 2,410 h Control ON hours: 2,436 h EQUIPMENT Documentation/manual Chip conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Nodpotwliwefx Ad Selc Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min Nljdpjxx A Dmsfx Ad Sec dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm Nsdjx E Eihopfx Ad Sslc MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Njdpfx Aeul Svljd Sjlc Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Trumpf TruBend 3170 B26 press brake Technical data Bending length: 4080 mm Press force: 170 t Distance between uprights: 4404 mm Nsdpex Hwcpjfx Ad Selc Year: 2022 Operating hours: 2,700

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Z-Axis Travel: 600 mm Njdpfeyindasx Ad Selc Machine is within new tolerence and geometry protocol is available.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, pressing force: 50 t, overall weight: 3,350 kg, Equipment: safety light barrier, We are offering this ready-to-use Amada HFE MK2 5012, 50 ton, 4-axis CNC press brake. Year of manufacture: 2016 Press force: 50 tons Max. bending length: 1250 mm If you have any questions or need further information, please feel free to send us a message or give us a call. The seller assumes no liability for typing or data transmission errors. The machine's condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee or warranty. Nedpfx Adey H Hgwj Solc