Press hydraulic 6 six meters automat

Lignum HK6

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg Bodjh Nvyzspfx Amroln

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, Bodpfxjyi Efco Amroln - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Bljdpofw Rt Rofx Amrsn Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. Blodpfjrblx Hox Amrjn - Hydraulic feed - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: good (used), Year of construction: 1985, functionality: fully functional, type of input current: three-phase, Lenght :10400mm/ piece Bledpfjdbacvox Amron Roller lenght: 1000 mm Roller diameter : 90 mm Space between rollers: 120mm Weight cca: 1800kg Stock: approx. 70m!! diferent sizes.

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Maximum wall panel height 3500mm Bodpfx Ajfqmtkjmroln One man operation Weight of unit 80kgs

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS Bledpfet Nfarsx Amrsn • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Bledpswgwmnsfx Amron Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Bjdpfx Amezi A Elorsln Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Finger Jointing Line GreCon CombiPact Manufacturer: GreCon Model: CombiPact Year of manufacture: 2006 Machine description: For sale: GreCon CombiPact finger jointing line, year 2006, designed for the production of finger-jointed solid wood elements. This machine is a compact and efficient solution for woodworking companies producing structural timber, glued components and solid wood elements for further processing. The GreCon CombiPact is well known for its reliable construction, precise finger profile machining and consistent production quality. Suitable for processing softwood and hardwood, depending on tooling and machine configuration. Bodpjyu Unwjfx Amroln Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Working thickness: up to approx. 80 mm - Pressing / output length: approx. 3000 – 6100 mm - Finger joint profile: typically 10/11 mm - Gluing system: automatic glue application system - Final press: included - Material: softwood and hardwood - Machine type: finger jointing line - Application: production of finger-jointed timber and solid wood components Features / advantages: - Compact design - High precision finger joint machining - Reliable and proven GreCon technology - Suitable for continuous production - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling and installed options.