Heavy duty roller conveyor

Interroll 10m x 0,9m

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm Pgsdpouz Hmxefx Ahyek - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Podpfx Ahskvnumsysgk Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes Podpfxswh Na Nj Ahyogk - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Pgsdpfx Ahjt Hg Hueyjk Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Pedsxvh E Ropfx Ahyogk Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 Psdjud N Hdjpfx Ahyjgk SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Technical features in the last photo Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267 Pedewmdynepfx Ahyjgk

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Pgsdpjtgqlyofx Ahyok Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Pgodpfx Ahovryhgeyok

Condition: good (used), functionality: fully functional, roll diameter: 80 mm, total width: 1,250 mm, total length: 40,750 mm, conveying length: 40,750 mm, power: 1.1 kW (1.50 HP), roll spacing: 160 mm, axle spacing: 160 mm, frame height: 185 mm, frame width: 85 mm, Pallet roller conveyor/roller conveyor/pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive System consists of 9 segments 6 x approx. 5.75 meters long 1 x approx. 5.30 meters long 1 x approx. 2.00 meters long 1 x approx. 0.95 meters long Each element is equipped with its own motor. Total length: approx. 40.75 meters Total width including motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveyor width: approx. 820 mm Roller diameter: approx. 80 mm Axles/axle spacing: approx. 160 mm Podpfx Ahotrv Anjysgk Frame width: approx. 85 mm Frame height: approx. 185 mm Color: Blue Includes pallet guide Includes SEW motor (1.1 kW) Includes feet (height-adjustable) The conveyor system was in operation until dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.